U20 舾装设备综合 标准查询与下载

GB/T 33431-2016 锚唇厚度设计指南

本标准给出了锚唇的术语和定义、设计原则与设计方法。 本标准适用于船舶凸台型锚唇设计与锚唇厚度的选用，其他类型可参照执行。

Guide for bell mouth thickness design

DIN EN ISO 6218:2016 内河航行船舶. 用于驱动装置和耦合船舶的手动和功率操作性耦合装置. 安全要求和主要尺寸(ISO 6218-2015);德文版本EN ISO 6218-2015

Inland navigation vessels - Manually- and power-operated coupling devices for pushing units and coupled vessels - Safety requirements and main dimensions (ISO 6218:2015); German version EN ISO 6218:2015

ANSI/ASTM F1322:2015 船用焚烧装置选用指南

Standard Guide for Selection of Shipboard Incinerators

KS V ISO 6043:2013 造船和海上建筑物.受拉伸载荷的叉和眼结构总成.主要尺寸

1.1 이 표준은 인장 하중을 받는 구성품에 사용되는 아이, 포크 및 이와 관련된 볼트 또는 핀의 주요 치수 및 재료에 대하여 규정한다.1.2 이 표준에 적합한 치수를 가지는 아이, 포크 및 볼트 또는 핀은 인장 하중만을 받는 선박용 하역 장치의 구성품에 사용된다.1.3 이 표준은 압축 추력 또는 비틀림 하중을 받는 구성품에는 적용하지 않는다.

Shipbuilding and marine structures — Eye and fork assemblies under tension load — Main dimensions

CB/T 4304-2013 船用固体垃圾压实机

本标准规定了船用固体垃圾压实机(以下简称压实机)的要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于处理可压缩固体垃圾的压实机的设计、制造、检验和验收。

Solid garbage compactors for ship

CB 20071-2012 潜艇用空气雾笛规范

本规范规定了潜艇用空气雾笛(以下简称雾笛)的要求、质量保证规定及交货准备。本规范适用于以压缩空气为动力,手动操作的潜艇用雾笛的设计、制造和验收。

Specification for air fog-horn of submarine

CB 20070-2012 潜艇用空气汽笛规范

本规范规定了潜艇用空气气笛(以下简称气笛)的要求、质量保证规定及交货准备。本规范适用于以压缩空气为动力,手动操作的潜艇用气笛的设计、制造和验收。

Specification for air whistle of submarine

ANSI/AGMA 6132-B-2013 船用装置标准:刺式和斜齿轮的应用和登记,公制版本

Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth, Metric Edition

ANSI/ASTM F2991:2013 非入级船舶结构的复板加强板修理指南

Guide For Doubler Plate Repairs For Non-Classed Ship Structures

ANSI/ASTM F1323:2008 船用焚烧装置的规范

Specification for Shipboard Incinerators

ASTM F1323-08 船用焚烧装置标准规范

1.1 This specification covers the design, manufacture, performance, operation, functioning, and testing of incinerators intended to incinerate garbage and other shipboard wastes generated during the ship''s normal service (that is, maintenance, operational, domestic, and cargo-associated wastes). 1.2 This specification is a companion document to Guide F 1322. 1.3 This specification applies to those incinerator plants with capacities up to 1500 kW per unit. 1.4 Additional information is given in Appendix X1-Appendix X9. 1.5 This specification does not apply to systems on special incinerator ships, for example, for burning industrial wastes such as chemicals, manufacturing residues, and so forth. 1.6 This specification does not address the electrical supply to the unit nor the foundation connections and stack connections. 1.7 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. If an incinerator is to be operated in littoral regions, the strictest governing regulations for those countries in which the incinerator may operate would form the requirement basis. See 5.11.

Standard Specification for Shipboard Incinerators

DIN EN 15272-1:2007 内河航行船舶.绳索导向设备.第1部分:一般要求

This European Standard specifies general requirements for rope leading on inland navigation vessels. This standard is an aid to selecting equipment for rope leading. It specifies general requirements for equipment for rope leading by means of fairleads, roller leads or rope leads as used, for example, for hauling, mooring and coupling inland navigation vessels under certain conditions.

Inland navigation vessels - Equipment for rope leading - Part 1: General requirements; German version EN 15272-1:2007

KS V ISO 784:2006 船舶卫生系统安装图常用符号

이 규격 즉, 권고 사항은 선박의 위생수 시스템에 사용하는 전형적인 설비의 계통도에 사용

Conventional signs to be used in schemes for the installations of sanitary systems in ships－Recommendation

CSA Z275.5-05-2006 专业潜水员培训第一版

This Standard specifies minimum requirements for a supplier’s quality assurance program-Category 2. The supplier is responsible for planning and developing a program aimed primarily at controlling production processes as well as inspection and test ver

Training for professional divers The First Edition

GJB 5453-2005 登陆舰艉门规范

本规范规定了登陆舰艉门(以下简称艉门)的要求和质量保证规定。 本规范适用于艉门的设计、制造和验收。

Specification for stern port of landing ship

CSA Z275.5-05-2005 职业潜水训练.第1版

This Standard applies to occupational diver trainees, training organizations, instructors, and facilities. It describes the requirements for trainee assessment, instructor qualifications, and minimum equipment for each level of training. This Standard a

Occupational diver training First Edition

DIN EN ISO 6218:2005 内河航行船舶.顶推船用手动连接装置.安全要求和主要尺寸

This Standard specifies safety requirements for manual coupling winches used for assembling inland navigation vessels as a push tow or vessels coupled alongside by means of wire rope connections.

Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions (ISO 6218:2005); German version EN ISO 6218:2005

CB/T 3885-2004 甲板漏水口

本标准规定了甲板漏水口的分类与标记、要求、试验方法、检验规则和包装。 本标准适用于各类船舶甲板、舱室地面排水系统用漏水口的制造和验收。

deck leak

CSA Z275.2-04-2004 潜水作业职业安全代码 第4版

plant site provisions.

Safety Roles for Diving Workers Fourth Edition; Update #1: November 2007; Update #2: December 2008

KS V ISO 6043:2003 造船和海上建筑物.受拉伸载荷的叉和眼结构总成.主要尺寸

1.1 이 규격은 인장 하중을 받는 구성품에 사용되는 아이, 포크 및 이와 관련된 볼트

Shipbuilding and marine structures-Eye and fork assemblies under tension load-Main dimensions