W11 棉半制品 标准查询与下载

GB/T 16985-1997 棉纤维长度试验方法 中段称重法

本标准规定了一种棉纤维长度试验方法--中段称重法。 本标准适用于细绒棉纤维长度的测定。不适用于棉纱或棉织物以及棉纤维与其他纤维的混合品中取出纤维的长度测定。

Test methods for length of cotton fibres--Middle weighting method

FZ/T 64005-2021 卫生用薄型非织造布

Hygienic Thin Nonwovens

FZ/T 64003-2021 喷胶棉絮片

Spray glue cotton sheet

DB14/T 1026-2018 学生公寓床上用品

本标准适用于山西省辖区内的大中专院校、中小学寄宿制学校集中采购的学生公寓床上用品。

student apartment bedding

DB43/T 1142-2015 中空聚酯纤维定量分析方法—根数比与质量比

Quantitative Analysis Method of Hollow Polyester Fiber - Number Ratio and Mass Ratio

DB43/T 1141-2015 棉与中空聚酯纤维混合不结板棉胎

Cotton and hollow polyester fiber mixed non-knot board batting

DB41/T 263-2014 絮用纤维制品 棉胎

Batting Fiber Products Cotton Batting

DB41/T 956-2014 絮用纤维制品 热熔胎

Hot-melt tires for fiber products

WJ/T 408-2014 光学零件清洁用脱脂棉规范

Specification for absorbent cotton for cleaning optical parts

DB42/T 852-2012 棉花 不孕籽回收棉

Cotton-Recycled cotton of sterile seeds

ASTM D7642-12 棉用分类仪器校准棉确定的标准实施规程

1.1 This practice provides instructions for the development of calibration cotton standards by establishing cotton fiber values for micronaire, length, uniformity index, and strength. The purpose of calibration cotton standards is for calibration of cotton classification instruments to the level of the internationally recognized United States Department of Agriculture (USDA) Benchmark Reference Cotton Standards. The USDA has established calibration cotton standards for domestic upland and Extra Long Staple (ELS) cottons and this practice provides an instruction for other geographical regions to establish their own calibration cotton standards for cotton classification instruments. 1.2 This practice shall be used for the establishment of calibration cottons for the testing of Upland and ELS cottons. 1.3 Only saw ginned cottons shall be used in this practice. Roller gin cottons are not valid for use due to higher measurement variability. 1.4 The calibration cotton established by this practice is not valid for use as a micronaire calibration standard. The micronaire standard value is not for the instrument calibration of the micronaire module; it is utilized by the instrument for the correction of the strength measurement during the calibration routine. 1.5 The values stated in inch-pound are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Establishment of Calibration Cottons for Cotton Classification Instruments

FZ/T 64003-2011 喷胶棉絮片

本标准规定了喷胶棉絮片的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于鉴定以涤纶短纤维为主要原料，经梳理成网，对纤网喷洒液体粘合剂，再经热处理制成的喷胶棉絮片的品质。

Wadding of spray-bounded nonwovens

FZ/T 64005-2011 卫生用薄型非织造布

本标准规定了卫生用薄型非织造布的产品分类、技术要求、试验方法、检验规则及标志、包装运输和贮存。 本标准适用于鉴定以符合卫生用要求的短纤维为原料，纤网经热熔粘合加固而制成的薄型非织造布的品质。 本标准适用于18g/m²～30g/m²一次性卫生用产品的面料和包覆材料。

Sanitary thin nonwoven

ASTM D7139-09e1 棉纤维的标准术语

1.1 This standard is the compilation of all terminology developed by Subcommittee D13.11 on Cotton Fibers. 1.2 This terminology is unique to the Cotton Fibers industry. Meanings of the same terms used outside the industry can be found in other compilations or in dictionaries of general usage. 1.3 In addition to being a specialized dictionary, D7139 is also a tool for managing the Subcommittee’s terminology. This includes finding, eliminating, and preventing redundancies, that is, where two or more terms relating to the same concept are defined in different words. 1.4 Terms listed are under the jurisdiction of Subcommittee D13.11. 1.5 For definitions of other textile terms see Terminology D123.

Standard Terminology for Cotton Fibers

ASTM D7139-09e2 棉纤维的标准术语

1.1 This standard is the compilation of all terminology developed by Subcommittee D13.11 on Cotton Fibers. 1.2 This terminology is unique to the Cotton Fibers industry. Meanings of the same terms used outside the industry can be found in other compilations or in dictionaries of general usage. 1.3 In addition to being a specialized dictionary, D7139 is also a tool for managing the Subcommittee’s terminology. This includes finding, eliminating, and preventing redundancies, that is, where two or more terms relating to the same concept are defined in different words. 1.4 Terms listed are under the jurisdiction of Subcommittee D13.11. 1.5 For definitions of other textile terms see Terminology D123.

Standard Terminology for Cotton Fibers

ASTM D7139-09(2013)e1 棉纤维相关标准术语

1.1 This standard is the compilation of all terminology developed by Subcommittee D13.11 on Cotton Fibers. 1.2 This terminology is unique to the Cotton Fibers industry. Meanings of the same terms used outside the industry can be found in other compilations or in dictionaries of general usage. 1.3 In addition to being a specialized dictionary, D7139 is also a tool for managing the Subcommittee’s terminology. This includes finding, eliminating, and preventing redundancies, that is, where two or more terms relating to the same concept are defined in different words. 1.4 Terms listed are under the jurisdiction of Subcommittee D13.11. 1.5 For definitions of other textile terms see Terminology D123.

Standard Terminology for Cotton Fibers

DB42/ 201-2003 棉胎

本标准规定了棉胎的术语和定义、分类、要求、试验方法、检验规则及标识、包装、运输、储存。本标准适用于棉胎。

Cotton wadding

DB36/T 416-2003 集团购买棉胎

规定了集团购买棉胎的要求、试验方法、检验规则和标志、包装

Group buys batting

DB52/ 438-2002 枕芯

本标准规定了枕芯的技术要求、试验方法、检验规则、标志、包装、运输和贮存。适用于以一定压缩回弹性材料为填充物，以各种面料为套子的枕芯。不适用于药枕、羽绒枕芯等有特殊用途的枕芯。

Pillow

DB50/T 36-2001 棉胎技术条件

本标准规定了棉胎的分类、规格、分级、要求、检验方法、试验规则、包装标志、贮存、运输；本标准适用于以棉花为原料，以棉纱为辅料，经过清花、梳棉或弹棉、铺棉、网纱、研磨而成的梳棉胎或弹棉胎。

Cotton tire technical conditions