Z67 物理污染控制标准 标准查询与下载

GB 5980-2009 内河船舶噪声级规定

本标准规定了内河船舶舱室噪声级的最大限制值。 本标准适用于干货船、液货船、集装箱船、客船、推（拖）船、滚装船、高速船、耙吸式和绞吸式挖泥船，其他船舶参照执行。

Regulation on noise levels on board inland ships

GB 22337-2008 社会生活环境噪声排放标准

本标准规定了营业性文化娱乐场所和商业经营活动中可能产生环境噪声污染的设备、设施边界噪声排放限值和测量方法。 本标准适用于对营业性文化娱乐场所、商业经营活动中使用的向环境排放噪声的设备、设施的管理、评价与控制。

Emission standard for community noise

GB 5980-2000 内河船舶噪声级规定

本标准规定了内河船舶舱室噪声级的限制值。 本标准适用于货船、液货船、集装箱船、客船、推（拖）船、旅游船、滚装船、高速船及自航工程船等内河营运船舶，其他船舶参照执行。 本标准不适用于特殊用途的船舶，如军船、消防船。

Regulation on noise levels on board inland ships

GB 16170-1996 汽车定置噪声限值

本标准规定了汽车定置噪声的限值。 本标准适用于城市道路允许行驶的在用汽车。

Limits of noise emitted by stationary road vehicles

GB 16169-1996 摩托车和轻便摩托车噪声限值

Limits of noise emitted by motorcycles and mopeds

GB 3096-1993 城市区域环境噪声标准

本标准规定了城市五类区域的环境噪声最高限值。 本标准适用于城市区域。乡村生活区域可参照本标准执行。

Standard of environmental noise of urban area Measuring method of environmental noise urban area

GB/T 14623-1993 城市区域环境噪声测量方法

本标准为执行GB3096《城市区域环境噪声标准》而制定。 本标准规定了城市区域环境噪声的测量方法。

Measuring method for environmental noise of urnan area

GB 14554-1993 恶臭污染物排放标准

本标准适用于全国所有向大气排放恶臭气体单位及垃圾堆放场的管理以及建设项目的环境影响评价、设计、竣工验收及其建成后的排放管理。

Emission standards for odor pollutants

GB 12525-1990 铁路边界噪声限值及其测量方法

本标准规定了城市铁路边界处铁路噪声的限值及其测量方法。 本标准适用对城市铁路边界噪声的评价。

Emission standards and measurement methods of railway noise on the boundary alongside railway line

GB/T 12524-1990 建筑施工场界噪声测量方法

本标准适用于城市建筑施工作业期间，由建筑施工场地产生的噪声测量。

Measurement method for noise from construction site

GB 12348-1990 工业企业厂界噪声标准

本标准适用于工厂及有可能造成噪声污染的企事业单位的边界。

Standard of noise at boundary of industrial enterprises

BS 6472-2:2008 人体暴露与建筑物振动中的评估指南.冲击感应振动

This part of BS 6472 gives guidance on human exposure to blast-induced vibration in buildings. It is primarily applicable to blasting associated with mineral extraction. This part of BS 6472 might also be useful in assessing other forms of vibration that are caused by blasting, including when explosives are utilized in civil engineering works and in demolition activity. One-off explosive events such as bridge or building demolitions are outside the scope of this document. This part of BS 6472 does not give guidance on the probability of equipment malfunction, building damage or injury to occupants in buildings subject to blast-induced vibration. Neither is guidance given on legal liability or vibration control and minimization. Advice on damage risk is given in BS 7385.

Guide to evaluation of human exposure to vibration in buildings Part 2: Blast-induced vibration

DOT 23 CFR PT 772-2008 公路交通噪音和建筑噪音的治理规程

To provide procedures for noise studies and noise abatement measures to help protect the public health and welfare, to supply noise abatement criteria, and to establish requirements for information to be given to local officials for use in the planning and design of highways approved pursuant to title 23 U.S.C.

PROCEDURES FOR ABATEMENT OF HIGHWAY TRAFFIC NOISE AND CONSTRUCTION NOISE

ASSE 1008-2006 住宅食物废物处理器铅管执行要求

Performance Requirements for Plumbing Aspects of Residential Food Waste Disposer Units

Performance Requirements for Plumbing Aspects of Residential Food Waste Disposer Units

NF S31-080:2006 声学 办公室和相关空间 按空间类型划分的声学性能水平和标准

Acoustique - Bureaux et espaces associés - Niveaux et critères de performances acoustiques par type d'espace

DB37/T 534-2005 畜禽养殖业污染物排放标准

本标准规定了集约化畜禽养殖场（区）最高允许排水量、畜禽养殖业废渣无害化、恶臭气体的最高允许日均排放浓度、水污染物最高允许日均排放浓度等标准。 本标准适用于山东省规模化、集约化畜禽养殖场和养殖区污染物的排放管理，以及建设项目环境影响评价、环境保护设施设计、竣工验收及其投产后的排放管理。

Pollutant Discharge Standards for Livestock and Poultry Breeding Industry

ASSE 1051-2002 卫生排水系统个人及分枝型抽空气执行要求

This standard applies to devices classified as atmospheric type vacuum breakers that are single pipe-applied (does notapplytot ank ballcocksorsimilardevicest hatdepend on floatoperatedv alves to control flow). The purpose of these devices is to provide protection of the potable water supply against pollutants or contaminants that enter the system due to backsiphonage through the outlet. Under backsiphonageconditions. a small amount ofwater is permitted toexit through the air ports.

Performance Requirements for Individual and Branch Type Air Admittance Valves for Sanitary Drainage Systems

ASSE 1050-2002 卫生排水系统抽空气执行要求

This standard provides dimensional and minimum performance requirements for anti-siphon fill valves (ballcocks) for gravity water closet flush tanks including protection of the potable water supply against back siphonage of water from the flush tank.

Performance Requirements for Stack Air Admittance Valves for Sanitary Drainage Systems

DB31/ 237-1999 助力车噪声极限

Limits of noise emitted by an engine boosting bicycle

ISO/TR 11688-2:1998 声学 低噪声机器和设备设计的推荐实用规程 第2部分:低噪声设计的物理工程说明

This part of ISO/TR 11688 provides the physical background for the low-noise design rules and examples given in ISO/TR 11688-1 and supports the use of extensive special literature. It is intended for use by designers of machinery and equipment as well as users and/or buyers of machines and authorities in the field of legislation, supervision or inspection. Equations given in this Technical Report will improve the general understanding of noise control. In many cases they allow a comparison of different versions of design, but they are not useful for the prediction of absolute noise emission values. Information on internal sound sources, transmission paths and sound radiating parts of a machine is the basis for noise control in machines. Therefore measurement methods and computational methods suitable to obtain this information are described in clauses 7 and 8 and annex A. note: 1) ISO/TR 11688-1:1995, Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning.

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design