C80;K04 标准查询与下载

GB/T 5169.9-2013 电工电子产品着火危险试验 第9部分:着火危险评定导则 预选试验程序 总则

预选试验程序总则GB/T5169 的本部分给出了依据预选试验为制造成品而评估和选择备选材料、元件或组件的导则本部分说明在成品设计阶段,预选给出了评估试验样品性能的比较着火危险试验方法,以及用于材料、零件、元件和组件的选择方法”同时,本部分迸一步捕述了标准化试验方法如何用于最小化电工电子设备着火危险的判定程序,并陈述了应考虑成品的预期着火反应性能,以及与成品性能相关的环境条件可能存在的影响”

Fire hazard testing for electric and electronic products.Part 9: Guidance for assessing the fire hazard.Preselection testing procedures.General guidelines

GB/T 5169.2-2013 电工电子产品着火危险试验 第2部分:着火危险评定导则 总则

GB/T 5169的本部分提供了如何将涉及电工电子产品着火的潜在影响和着火风险降低到可以接受的水平的总则,为GB/T 5169的其他导则性出版物充当指示性标准。本部分阐述了着火风险和着火潜在影响之间的关系,并对定性和定量着火试验在电工电子产品着火危险评定方面的适用性为产品标委会提供指南。本部分强调着火危险和风险评定中火情的重要性,并讨论用于确定着火危险试验方法技术发展的准则。本部分还论述了着火试验的不同类型,尤其是定性和定量着火试验的类型。也描述了适用于产品标委会的定性着火试验的维护和开发。

Fire hazard testing for electric and electronic products.Part 2: Guidance for assessing the fire hazard.General guidelines

GB/T 5169.18-2013 电工电子产品着火危险试验 第18部分:燃烧流的毒性 总则

GB/T 5169的本部分提供了影响电工电子产品火灾中毒危险因素的指南;同时,也提供了 ISO/TC92(SC 3)推荐的评估和降低火灾中毒危险的方法,这些方法在ISO 19706、ISO 13344和ISO 13571中有表述。没有单一的试验可以真实地评定火灾的中毒危险。小规模毒效试验本身无法评定火灾的中毒危险。现行的毒性试验致力于测量实验室中产生的燃烧流的毒效。然而,毒效不应与中毒危险混淆。

Fire hazard testing for electric and electronic products.Part 18:Toxicity of fire effluent.General guidance

IEC 60695-10-3:2016 着火危险试验.第10-3部分:非正常热.模压应力释放变形试验

This part of IEC 60695 specifies a mould stress relief distortion test. It is applicable to electrotechnical equipment including parts made from polymeric materials. This test method is intended to evaluate the effects caused by relief of the residual process- induced stress, set in a moulded polymeric assembly of an end product. This stress relief occurs when the sample (energized or not), is exposed to conditioning at a defined temperature for a defined period of time. The test specimen is considered to have satisfactorily withstood the test if, after conditioning to room temperature, it meets defined test criteria. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.

Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

JIS C 60695-11-2:2016 着火危险测试.第11-2部分:试验火焰.1kW标称预混合型火焰.设备、验证试验安排和指南

Fire hazard testing -- Part 11-2: Test flames -- 1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance

JIS C 60695-11-2:2007 着火危险测试.第11-2部分:试验火焰.1kW标称预混合型火焰.设备、验证试验安排和指南

この規格は，公称1kWのプロパンガスの予混炎を生成するための装置，炎の確認試験方法などの詳細について規定する。

Fire hazard testing -- Part 11-2: Test flames -- 1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance

NF C20-924-4:2006 火灾试验.第4部分:电工产品着火试验相关术语

Fire hazard testing - Part 4 : terminology concerning fire tests for electrotechnical products.

BS EN 60695-11-5:2005 着火危险试验.试验火焰.针状火焰试验方法.器具、验证性试验设备和指南

This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

Fire hazard testing - Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance

BS EN 60695-7-1:2004 着火危险试验.燃烧废物的毒性.一般指南

This part of IEC 60695 provides guidance on the factors which affect the toxic hazard from fires involving electrotechnical products, and provides information on the methodologies recommended by ISO TC 92 (SC 3) for estimating and reducing toxic hazard from fires, as expressed in ISO/TR 9122 (Parts 1 to 6), ISO 13344 and ISO/TS 13571. There is no single test to realistically assess toxic hazard in fires. Small-scale toxic potency tests are not capable on their own of assessing fire hazard. Current toxicity tests attempt to measure the toxic potency of a laboratory generated fire effluent. Toxic potency should not be confused with toxic hazard. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

Fire hazard testing - Toxicity of fire effluent - General guidance

IEC TS 60695-11-3:2004 着火危险试验.第11-3部分:试验火焰.500W火焰.设备和验证试验方法

GB/T 5169的本部分规定了产生500 W标称预混合型试验火焰的具体要求。火焰的总高度大约为125 mm。 本部分给出了两种试验火焰：方法A火焰以甲烷为燃料，方法C火焰以甲烷或丙烷为燃料。

Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods

BS EN 60695-11-2:2003 着火危险试验.试验火焰.1kW额定预混合火焰.设备、验证试验方法和指南

This part of IEC 60695 gives the detailed requirements for the production of a 1 kW nominal, propane based pre-mixed type test flame. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

Fire hazard testing - Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

BS EN 60695-11-2:2004 着火危险试验.试验火焰.1kW额定预混合火焰.设备、验证试验方法和指南

This part of IEC 60695 gives the detailed requirements for the production of a 1 kW nominal, propane based pre-mixed type test flame. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

Fire hazard testing - Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

IEC 60695-1-40:2002 着火危险试验.第1-40部分:电工产品火灾危险的评估指南.绝缘液体

Provides guidance on the minimization of fire hazard arising from the use of electrical insulating liquids to a) electrotechnical equipment and systems, b) people, building structures and their contents. As insulating liquids are always part of an insulating system, the fire hazard of the complete system must also be assessed. Has the status of a basic safety publication in accordance with IEC Guide 104.

Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products; Insulating liquids

IEC TS 60695-1-40:2002 着火危险试验.第1-40部分:电工产品火灾危险的评估指南.绝缘液体

Provides guidance on the minimization of fire hazard arising from the use of electrical insulating liquids to a) electrotechnical equipment and systems, b) people, building structures and their contents. As insulating liquids are always part of an insulating system, the fire hazard of the complete system must also be assessed. Has the status of a basic safety publication in accordance with IEC Guide 104.

Fire hazard testing Part 1-40: Guidance for assessing the fire hazard of electrotechnical products Insulating liquids (Edition 1.0)

BS EN 60695-8-1:2001 着火危险试验.热释放.一般指南

To be read in conjunction with IEC 60695-8-2

Fire hazard testing - Heat release - General guidance