E20;E30 标准查询与下载

BS EN ISO 3679:2015 闪点、无闪点和闪点的测定 快速平衡闭杯法

Determination of flash no-flash and flash point. Rapid equilibrium closed cup method

JIS K 2251 ERRATUM 2:2009 勘误表

ERRATUM

JIS K 2251 ERRATUM 1:2008 勘误表

ERRATUM

DIN EN 14832:2005 石油和相关产品.耐火磷酸酯液体氧化稳定性和腐蚀性的测定

This standard specifies a method for the determination of the oxidation stability and corrosivity of fire-resistant fluids.

Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids; German version EN 14832:2005

DIN EN 14833:2005 石油和相关产品.耐火磷酸酯液体水解稳定性的测定

This standard specifies a method for the determination of hydrolytic stability of fire-resistant fluids.

Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids; German version EN 14833:2005

BS ISO 15597:2004 石油和石油产品试验方法.BS 2000-503:氯和溴含量的测定.波长色散X射线荧光光谱测定法

This International Standard specifies a method for the determination of the chlorine and bromine content of liquid petroleum products, synthetic oils and fluids, and additives for petroleum products (including used oils) that are soluble in organic solvents of negligible or accurately known chlorine/bromine content. The method is applicable to products or additives having chlorine contents in the range 0,0005% (m/m) to 0,1000% (m/m), and bromine contents in the range 0,001 0 % (m/m) to 0,1000 % (m/m). Other elements do not generally interfere, although lead may interfere at contents above 0,1500 % (m/m) (see note 2). NOTE 1 For the purposes of this International Standard, the term "% (m/m)" is used to represent the mass fraction of a material. NOTE 2 Used lubricants may pose particular problems due to the range of potentially interfering elements at relatively high concentrations. For used lubricants generally, the lower limit of sensitivity may be 0,0050 % (m/m) even when the provisions of the last paragraph of 9.3 are applied.

Methods of test for petroleum and its products - BS 2000-503: Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry

ISO 3838:2004 原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞比重瓶和带刻度双毛细管比重瓶法

1 This International Standard specifies methods for the determination of the density or relative density of crude petroleum and of petroleum products handled as liquids. 2 The capillary-stoppered pyknometer method is also for use with solids and this method may also be used for coal tar products, including road tars, creosote and tar pitches, or for mixtures of these with petroleum products. This method is not suitable for the determination of the density or relative density of highly volatile liquids having Reid vapour pressures greater than 50 kPa according to ISO 3007 or having an initial boiling point below 40 ℃. 3 The graduated bicapillary pyknometer method is recommended for the accurate determination of the density or relative density of all except the more viscous products, and is particularly useful when only small amounts of samples are available. The method is restricted to liquids having Reid vapour pressures of 130 kPa or less according to ISO 3007 and having kinematic viscosities less than 50 mm/s [50 centistokes (cSt)] at the test temperature. Special precautions are specified for the determination of the density or relative density of highly volatile liquids.

Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods

BS EN ISO 3679:2004 石油及其制品的试验方法.BS 2000-523:闪点的测定.快速平衡闭杯法

Identical with IP 523-2005.

Methods of test for petroleum and its products - BS 2000-523: Determination of flash point - Rapid equilibrium closed cup method

BS EN ISO 3680:2004 石油及其制品的试验方法.BS 2000-524:闪点/非闪点的测定.快速平衡闭杯法

Identical with IP 524-2005

Methods of test for petroleum and its products - BS 2000-524: Determination of flash/no flash - Rapid equilibrium closed cup method

JIS K 2251:2003 原油及石油产品的取样

この規格は，原油，石油製品，半製品.タンク残留物及びたい積物の試料を固定タンク，タンク車，タンクローリ，ドラム，石油タンカー，バージ船などの船舶 (以下，船という。)並びにパイプラインなどから採取する方法について規定する。ただし，液化石油ガス，電気絶縁油及び芳香族製品は適用しない。

Crude petroleum and petroleum products -- Sampling

DIN EN ISO 14935:1998 石油及其相关产品.耐火流体的吸油绳火焰持续时间的测定

Petroleum and related products - Determination of wickflame persistence of fire-resistant fluids (ISO 14935:1998); German version EN ISO 14935:1998