M33;L23 标准查询与下载
共找到 33 条与 相关的标准，共 3 页
Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type CLIK connector series
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2014-06-30
- 实施
- 2014-06-30
Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2013-03
- 实施
This part of IEC 61300 describes methods for quantitatively assessing the endface quality of an optic receptacle interface for single mode applications@ equipped with transceivers such as SFP/XFP. Lens type and stub ferrule type interface configurations are designed for this interface@ but this standard defines the end face quality of the stub ferrule type in this edition. The information is intended for use with other standards which set requirements for allowable surface defects such as scratches@ pits and debris which may affect optical performance. In general@ the methods described in this standard apply to 125 ?? cladding fibres contained within a ferrule and intended for use with sources of ??2 W of input power.
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-44: Examinations and measurements - Fibre optic trancsceiver receptacle endface visual and automated inspection
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2012-08
- 实施
- 2016-04-05
This part of IEC 60874 applies to fibre optic connector sets and individual components (i.e. adaptors@ plugs@ sockets) for all types@ sizes and structures of fibres and cables. It includes: ?C connector set requirements; This part of IEC 60874 is divided into four clauses: ?C Clauses 1 (Scope)@ 2 (Normative references) and 3 (Terms and definitions) contain general information pertaining to this generic specification; ?C Clause 4 (Requirements) contains all the requirements to be met by connectors covered by this specification. This includes requirements for classification@ the IEC specification system@ documentation@ materials@ workmanship@ quality@ performance@ identification@ and packaging. NOTE 1 Clauses 1 to 4 are applicable generally and refer to all connector standards NOTE 2 This part of IEC 60874 applies also to the connectors covered by the IEC 61753@ IEC 61754@ and IEC 61755 series. This standard does not cover test and measurement procedures@ which are described in the IEC 61300 series.
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2011-11
- 实施
- 2011-11-27
This blank detail specification is not@ by itself@ a specification. It is part of the generic specification IEC 60874-1@ Fibre Optic Interconnecting Devices and Passive Components ?C Connectors for optical fibres and cables ?C Part 1: Generic specification. It includes: ?C a blank worksheet with instructions for preparing detail specifications.
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2011-11
- 实施
- 2011-11-23
This part of IEC 61314 specifies requirements for fan-outs used in the fibre optics field to provide a safe transition from multifibre cable units to individual fibres or cables. This standard corresponds to QC880000 of IEC Quality Assessment System. This standard does not cover test and measurement procedures@ which are described in IEC 61300 series.
Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2011-11
- 实施
- 2011-11-27
Table 6 – Visual requirements for PC polished connectors, multimode fibres
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2010-06
- 实施
This part of IEC 61754 defines the standard interface dimensions for the type LSH family of connectors.
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family (IEC 61754-15:2009); German version EN 61754-15:2009
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2010-04
- 实施
- 2010-04-01
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal); Corrigendum 1
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2010-01
- 实施
IEC/PAS 61753-1-3, Ed. 1.0: Fibre optic interconnecting devices and passive components performance standard - Part 1-3: General and guidance for single-mode fibre optic connector performance for harsh industrial operating conditions
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-07
- 实施
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-06
- 实施
- 2009-06-12
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-06
- 实施
- 2009-06-12
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-06
- 实施
- 2009-06-12
Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
- ICS
- 33.180.20;33.180.99
- CCS
- M33;L23
- 发布
- 2009-06
- 实施
- 2016-12-12
Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-01
- 实施
- 2011-11-27
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-01
- 实施
- 2009-01-30
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-01
- 实施
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic device
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-01
- 实施
Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-01
- 实施
- 2009-01-16
Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical interface 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode
- ICS
- 33.180.20
- CCS
- M33;L23
- 发布
- 2009-01
- 实施
- 2009-01-16
