N18;P76 标准查询与下载

IEC 61784-3-2:2016 工业通讯网络.配置文件.第3-2部分:功能安全性数据库字段总线.CPF 2的附加规范

This part of the IEC 61784-3 series specifies a safety communication layer (services and protocol) based on CPF 2 of IEC 61784-1, IEC 61784-2 and IEC 61158 Type 2. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer. This safety communication layer is intended for implementation in safety devices only. NOTE 1 It does not cover electrical safety and intrinsic safety aspects. Electrical safety relates to hazards such as electrical shock. Intrinsic safety relates to hazards associated with potentially explosive atmospheres. This part1 defines mechanisms for the transmission of safety-relevant messages among participants within a distributed network using fieldbus technology in accordance with the requirements of IEC 61508 series2 for functional safety. These mechanisms may be used in various industrial applications such as process control, manufacturing automation and machinery. This part provides guidelines for both developers and assessors of compliant devices and systems. NOTE 2 The resulting SIL claim of a system depends on the implementation of the selected functional safety communication profile within this system - implementation of a functional safety communication profile according to this part in a standard device is not sufficient to qualify it as a safety device.

Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2

IEC 62591:2016 工业网络.无线通讯网络和通讯子协议.无线HARTTM

This International Standard specifies a wireless communication network in addition to the Type 20 in IEC 61158-3-20, IEC 61158-4-20, IEC 61158-5-20, IEC 61158-6-20 and a Communication Profile CP 9/2 in addition to IEC 61784-1, CPF 9. This standard specifies the following: Physical layer service definition and protocol specification; Data-link layer service and protocol; Application layer service and protocol; Network management; Security; Communication profile; Wireless procedures and; Gateway.

Industrial networks - Wireless communication network and communication profiles - WirelessHARTTM

DIN EN 61158-3-3:2015 工业通讯网络 现场总线规范 第3-3部分：数据联络层设备定义 类型3要素(IEC 61158-3-3-2014) 英文版本EN 61158-3-3-2014

Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements (IEC 61158-3-3:2014); English version EN 61158-3-3:2014, only on CD-ROM

DIN EN 61158-3-13:2015 工业通讯网络 现场总线规范 第3-13部分：数据联络层设备定义.13型元件(IEC 61158-3-13-2014) 英文版本EN 61158-3-13-2014

Industrial communication networks - Fieldbus specifications - Part 3-13: Data-link layer service definition - Type 13 elements (IEC 61158-3-13:2014); English version EN 61158-3-13:2014, only on CD-ROM

DIN EN 61158-3-4:2015 工业通讯网络 现场总线规范 第3-4部分：数据联络层设备定义 类型4要素(IEC 61158-3-4-2014) 英文版本EN 61158-3-4-2014

Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements (IEC 61158-3-4:2014); English version EN 61158-3-4:2014, only on CD-ROM

DIN EN 61158-3-2:2015 工业通讯网络 现场总线规范 第3-2部分：数据联络层设备定义.2型元件(IEC 61158-3-2-2014) 英文版本EN 61158-3-2-2014

Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements (IEC 61158-3-2:2014); English version EN 61158-3-2:2014, only on CD-ROM

BS EN 61158-5-9:2014 工业通讯网络.现场总线规范.应用层服务定义.9型元件

Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 9 elements

IEC 61158-4-1:2014 工业通讯网络.现场总线规范.第4-1部分:数据联络层协议规范.1型元件

General The data-link layer provides basic time-critical messaging communications between devices in an automation environment. This protocol provides the data-link service by making use of the services available from the physical layer. The relationship between the International Standards for fieldbus data-link service@ fieldbus data-link protocol@ fieldbus physical service and systems management is described in IEC 61158-1. This protocol provides communication opportunities to all participating data- link entities a) in a cyclic asynchronous manner@ sequentially to each of those data-link entities@ and b) in a synchronous manner@ either cyclically or acyclically@ according to a pre-established schedule. The specified protocol also provides means of changing the set of participating data- link entities and of modifying the set of scheduled communications opportunities. W hen the set of scheduled communications opportunities is null@ the distribution of communication opportunities to the participating data-link entities is completely asynchronous. Thus this protocol can be characterized as one which provides access asynchronously but with a synchronous overlay. Specifications This standard specifies a) procedures for the timely transfer of data and control information from one data- link user entity to a peer user entity@ and among the data-link entities forming the distributed datalink service provider; b) the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard@ and their representation as physical interface data units. NOTE In IEC 61158-4-1@ gray boxes have been used in the tables to indicate that the specified field is not a conceptual part of the specific DLPDU. Procedures The procedures are defined in terms of a) the interactions between peer DL-entities (DLEs) through the exchange of fieldbus DLPDUs; b) the interactions between a DL-service (DLS) provider and a DLS-user in the same system through the exchange of DLS primitives; c) the interactions between a DLS-provider and a Ph-service provider in the same system through the exchange of Ph-service primitives. Applicability These procedures are applicable to instances of communication between systems which support time-critical communications services within the data-link layer of the OSI or fieldbus reference models and which require the ability to interconnect in an open systems interconnection environment. Profiles provide a simple multi-attribute means of summarizing an implementation's capabilities@ and thus its applicability to various time-critical communications needs. Conformance This standard also specifies conformance requirements for systems implementing these procedures. This standard does not contain tests to demonstrate compliance with such requirements.

Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements

IEC 61158-6-4:2014 工业通讯网络.现场总线规范.第6-4部分:应用层协议规范.4型元件

"General The fieldbus application layer (FAL) provides user programs with a means to access the fieldbus communication environment. In this respect@ the FAL can be viewed as a ""window between corresponding application programs."" This standard provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 4 fieldbus. The term ""time-critical"" is used to represent the presence of a time-window@ within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions@ with attendant risk to equipment@ plant and possibly human life. This standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 4 fieldbus application layer in terms of a) the formal abstract syntax defining the application layer protocol data units conveyed between communicating application entities; b) the transfer syntax defining encoding rules that are applied to the application layer protocol data units; c) the application context state machine defining the application service behavior visible between communicating application entities; d) the application relationship state machines defining the communication behavior visible between communicating application entities. The purpose of this standard is to define the protocol provided to 1) define the wire-representation of the service primitives defined in IEC 61158-5-4@ and 2) define the externally visible behavior associated with their transfer. This standard specifies the protocol of the Type 4 fieldbus application layer@ in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). Specifications The principal objective of this standard is to specify the syntax and behavior of the application layer protocol that conveys the application layer services defined in IEC 61158-5-4. A secondary objective is to provide migration paths from previously-existing industrial communications protocols. It is this latter objective which gives rise to the diversity of protocols standardized in IEC 61158-6 series. Conformance This standard do not specify individual implementations or products@ nor do they constrain the implementations of application layer entities within industrial automation systems. Conformance is achieved through implementation of this application layer protocol specification."

Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4 elements

IEC 61158-3-13:2014 工业通讯网络.现场总线规范.第3-13部分:数据联络层设备定义.13型元件

"General This part of IEC 61158 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term ""time-critical"" is used to represent the presence of a time-window@ within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions@ with attendant risk to equipment@ plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the Type 13 fieldbus data-link layer in terms of a) the primitive actions and events of the service; b) the parameters associated with each primitive action and event@ and the form which they take; and c) the interrelationship between these actions and events@ and their valid sequences. The purpose of this standard is to define the services provided to the Type 13 fieldbus application layer at the boundary between the application and datalink layers of the fieldbus reference model@ and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. Specifications The principal objective of this standard is to specify the characteristics of conceptual data-link layer services suitable for time-critical communications@ and thus supplement the OSI Basic Reference Model in guiding the development of data-link protocols for time-critical communications. A secondary objective is to provide migration paths from previously-existing industrial communications protocols. This specification may be used as the basis for formal DL-Programming-Interfaces. Nevertheless@ it is not a formal programming interface@ and any such interface will need to address implementation issues not covered by this specification@ including a) the sizes and octet ordering of various multi-octet service parameters@ and b) the correlation of paired request and confirm@ or indication and response@ primitives. Conformance This standard does not specify individual implementations or products@ nor do they constrain the implementations of data-link entities within industrial automation systems. There is no conformance of equipment to this data-link layer service definition standard. Instead@ conformance is achieved through implementation of the corresponding data-link protocol that fulfills the Type 13 data-link layer services defined in this standard."

Industrial communication networks - Fieldbus specifications - Part 3-13: Data link layer service definition - Type 13 elements

IEC 61158-4-4:2014 工业通讯网络.数据总线规范.第4-4部分:数据联络层协议规范.4型元件

General The data-link layer provides basic time-critical messaging communications between devices in an automation environment. This protocol provides a means of connecting devices through a partial mesh network@ such that most failures of an interconnection between two devices can be circumvented. In common practice the devices are interconnected in a non-redundant hierarchical manner reflecting application needs Specifications This standard specifies a) procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity@ and among the data-link entities forming the distributed datalink service provider; b) the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard@ and their representation as physical interface data units. Procedures The procedures are defined in terms of a) the interactions between peer DL-entities (DLEs) through the exchange of fieldbus DLPDUs; b) the interactions between a DL-service (DLS) provider and a DLS-user in the same system through the exchange of DLS primitives; c) the interactions between a DLS-provider and a Ph-service provider in the same system through the exchange of Ph-service primitives. Applicability These procedures are applicable to instances of communication between systems which support time-critical communications services within the data-link layer of the OSI or fieldbus reference models@ and which require the ability to interconnect in an open systems interconnection environment. Profiles provide a simple multi-attribute means of summarizing an implementation's capabilities@ and thus its applicability to various time-critical communications needs. Conformance This standard also specifies conformance requirements for systems implementing these procedures. This standard does not contain tests to demonstrate compliance with such requirements.

Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements

IEC 61158-3-4:2014 工业通讯网络.数据总线规范.第3-4部分:数据联络层设备定义.4型元件

"General This part of IEC 61158 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term ""time-critical"" is used to represent the presence of a time-window@ within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions@ with attendant risk to equipment@ plant and possibly human life. This standard defines in an abstract way the externally visible services provided by the Type 4 fieldbus data-link layer in terms of a) the primitive actions and events of the services; b) the parameters associated with each primitive action and event@ and the form which they take; and c) the interrelationship between these actions and events@ and their valid sequences. The purpose of this standard is to define the services provided to the Type 4 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model; systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. Specifications The principal objective of this standard is to specify the characteristics of conceptual data-link layer services suitable for time-critical communications@ and thus supplement the OSI Basic Reference Model in guiding the development of data-link protocols for time-critical communications. A secondary objective is to provide migration paths from previously-existing industrial communications protocols. This specification may be used as the basis for formal DL-Programming-Interfaces. Nevertheless@ it is not a formal programming interface@ and any such interface will need to address implementation issues not covered by this specification@ including a) the sizes and octet ordering of various multi-octet service parameters; b) the correlation of paired request and confirm@ or indication and response@ primitives. Conformance This standard does not specify individual implementations or products@ nor does it constrain the implementations of data-link entities within industrial automation systems. There is no conformance of equipment to this data-link layer service definition standard. Instead@ conformance is achieved through implementation of the corresponding data-link protocol that fulfills the Type 1 data-link layer services defined in this standard."

Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements

IEC 61158-3-2:2014 工业通讯网络.数据总线规范.第3-2部分:数据联络层设备定义.2型元件

"General This part of IEC 61158 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term ""time-critical"" is used to represent the presence of a time-window@ within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions@ with attendant risk to equipment@ plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the Type 2 fieldbus data-link layer in terms of: a) the primitive actions and events of the service; b) the parameters associated with each primitive action and event@ and the form which they take; and c) the interrelationship between these actions and events@ and their valid sequences. The purpose of this standard is to define the services provided to: the Type 2 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model; systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. Type 2 DL-service provides both a connected and a connectionless subset of those services specified in ISO/IEC 8886. Specifications The principal objective of this standard is to specify the characteristics of conceptual data-link layer services suitable for time-critical communications and thus supplement the OSI Basic Reference Model in guiding the development of data-link protocols for time-critical communications. A secondary objective is to provide migration paths from previously-existing industrial communications protocols. This specification may be used as the basis for formal DL-Programming-Interfaces. Nevertheless@ it is not a formal programming interface@ and any such interface will need to address implementation issues not covered by this specification@ including: a) the sizes and octet ordering of various multi-octet service parameters; b) the correlation of paired request and confirm@ or indication and response@ primitives. Conformance This standard does not specify individual implementations or products@ nor does it constrain the implementations of data-link entities within industrial automation systems. There is no conformance of equipment to this data-link layer service definition standard. Instead@ conformance is achieved through implementation of the corresponding data-link protocol that fulfills the Type 1 data-link layer services defined in this standard."

Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements

IEC 61158-4-13:2014 工业通讯网络.数据总线规范.第4-13部分:数据联络层协议规范.13型元件

General The data-link layer provides basic time-critical messaging communications between devices in an automation environment. This protocol provides communication opportunities to all participating data-link entities a) in a synchronously-starting cyclic manner@ according to a pre-established schedule@ and b) in a cyclic or acyclic asynchronous manner@ as requested each cycle by each of those data-link entities. Thus this protocol can be characterized as one which provides cyclic and acyclic access asynchronously but with a synchronous restart of each cycle

Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 elements

IEC 61158-5-4:2014 工业通讯网络.现场总线规范.第5-4部分:应用层设备定义.4型元件

Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements

IEC 61158-6-13:2014 工业通讯网络.现场总线规范.第6-13部分:应用层协议规范.13型元件

Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements

IEC 61158-6-5:2014 工业通讯网络.现场总线规范.第6-5部分:应用层协议规范.5型元件

Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements

IEC 61158-5-5:2014 工业通讯网络.现场总线规范.第5-5部分:应用层设备定义.5型元件

Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements

IEC 61158-5-13:2014 工业通讯网络.现场总线规范.第5-13部分:数据联络层设备定义.13型元件

"The fieldbus Application Layer (FAL) provides user programs with a means to access the fieldbus communication environment. In this respect@ the FAL can be viewed as a ""window between corresponding application programs."" This standard provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 13 fieldbus. The term ""time-critical"" is used to represent the presence of a time-window@ within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions@ with attendant risk to equipment@ plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the different Types of the fieldbus Application Layer in terms of a) an abstract model for defining application resources (objects) capable of being manipulated by users via the use of the FAL service@ b) the primitive actions and events of the service; c) the parameters associated with each primitive action and event@ and the form which they take; and d) the interrelationship between these actions and events@ and their valid sequences. The purpose of this standard is to define the services provided to 1) the FAL user at the boundary between the user and the Application Layer of the Fieldbus Reference Model@ and 2) Systems Management at the boundary between the Application Layer and Systems Management of the Fieldbus Reference Model. This standard specifies the structure and services of the IEC fieldbus Application Layer@ in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI Application Layer Structure (ISO/IEC 9545). FAL services and protocols are provided by FAL application-entities (AE) contained within the application processes. The FAL AE is composed of a set of object-oriented Application Service Elements (ASEs) and a Layer Management Entity (LME) that manages the AE. The ASEs provide communication services that operate on a set of related application process object (APO) classes. One of the FAL ASEs is a management ASE that provides a common set of services for the management of the instances of FAL classes. Although these services specify@ from the perspective of applications@ how request and responses are issued and delivered@ they do not include a specification of what the requesting and responding applications are to do with them. That is@ the behavioral aspects of the applications are not specified; only a definition of what requests and responses they can send eceive is specified. This permits greater flexibility to the FAL users in standardizing such object behavior. In addition to these services@ some supporting services are also defined in this standard to provide access to the FAL to control certain aspects of its operation. Specifications The principal objective of this standard is to specify the characteristics of conceptual application layer services suitable for time-critical communications@ and thus supplement the OSI Basic Reference Model in guiding the development of application layer protocols for timecritical communications. A secondary objective is to provide migration paths from previously-existing industrial communications protocols. It is this latter objective which gives rise to the diversity of services standardized as the various Types of IEC 61158@ and the corresponding protocols standardized in subparts of IEC 61158-6. This specification may be used as the basis for formal Application Programming-Interfaces. Nevertheless@ it is not a formal programming interface@ and any such interface will need to address implementation issues not covered by this specification@ including a) the sizes and octet ordering of various multi-octet service parameters@ and b) the correlation of paired request and confirm@ or indication and response@ primitives. Conformance This standard does not specify individual implementations or products@ nor does it constrain the implementations of application layer entities within industrial automation systems. There is no conformance of equipment to this application layer service definition standard. Instead@ conformance is achieved through implementation of conforming application layer protocols that fulfill any given Type of application layer services as defined in this standard"

Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements

IEC 61158-3-3:2014 工业通讯网络.现场总线规范.第3-3部分:数据联络层设备定义.3型元件

Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements