N73;A53 标准查询与下载

ISO 5347-4:1993 振动与冲击传感器的校准方法 第4部分:二次冲击校准

Methods for the calibration of vibration and shock pick-ups; part 4: secondary shock calibration

ISO 5347-6:1993 振动与冲击传感器的校准方法 第6部分:低频振动一次校准

Methods for the calibration of vibration and shock pick-ups; part 6: primary vibration calibration at low frequencies

ISO 5347-14:1993 振动与冲击传感器的校准方法 第14部分:安装在钢块上的无阻尼加速度计共振频率的测试

Lays down detailed specifications for the instrumentation and procedure to be used for resonance frequency testing. It is a very limited method applicable exclusively to undamped accelerometers, mainly of the piezoelectric type, having a mass of less than 30 g. Is applicable for a frequency range from 1 kHz to 50 kHz. The general method for resonance frequency determination, by frequency sweeping and measuring sensitivity as a function of frequency, will be dealt with in a future part of 5347.

Methods for the calibration of vibration and shock pick-ups; part 14: resonance frequency testing of undamped accelerometers on a steel block

ISO 5347-15:1993 振动与冲击传感器的校准方法 第15部分:声灵敏度测试

Lays down detailed specifications for the instrumentation and procedure to be used for acoustic sensitivity testing. Applies to accelerometers. Is applicable for a frequency range of random noise from 125 Hz to 8000 Hz and a sound pressure level of 130 dB (reference value: 2 * 10 Pa).

Methods for the calibration of vibration and shock pick-ups; part 15: testing of acoustic sensitivity

ISO 5347-16:1993 振动与冲击传感器的校准方法 第16部分:安装力矩灵敏度测试

Lays down detailed specifications for the instrumentation and procedure to be used for mounting torque sensitivity testing. Applies to pick-ups mounted by screws, bolts or other threaded fasteners. The change in calibration factor due to the mounting torque is determined. Is applicable for a mounting torque range of one-half of the specified value, the specified value und twice the value of the specified mounting torque.

Methods for the calibration of vibration and shock pick-ups; part 16: testing of mounting torque sensitivity

ISO 5347-17:1993 振动与冲击传感器的校准方法 第17部分:温度灵敏度比较测试法

Lays down detailed specifications for the instrumentation and procedure to be used for fixed temperature sensitivity testing. Applies to rectilinear pick-ups. Is applicable for the following parameters: frequency range: 20 Hz to 1250 Hz; dynamic range: 0,1 鎚 to 10 mm (frequency-dependent), 1 mm/s to 1 m/s (frequency-dependent), 10 m/s to 1000 m/s (frequency-dependent); temperature range: - 45 鳦 to + 800 鳦. The uncertainty applicable is ?10 % of reading.

Methods for the calibration of vibration and shock pick-ups; part 17: testing of fixed temperature sensitivity

ISO 5347-18:1993 振动与冲击传感器的校准方法 第18部分:瞬变温度灵敏度测试法

Lays down detailed specifications for the instrumentation and procedure to be used for transient temperature sensitivity testing. Applies to piezoelectric pick-ups, whereby pick-up output due to sudden temperature change is measured.

Methods for the calibration of vibration and shock pick-ups; part 18: testing of transient temperature sensitivity