Q10;P16 标准查询与下载

JIS A 1304:2017 建筑结构构件耐火性试验方法

Method of fire resistance test for elements of building construction

JIS A 1311 AMD 1:2011 建筑物防火门的耐火试验方法(修改件1)

Method of fire protecting test of fire door for buildings (Amendment 1)

JIS A 1302 AMD 1:2011 建筑物不易燃烧结构部件的防火试验方法(修改件1)

Method of fire test for noncombustible structural parts of buildings (Amendment 1)

JIS A 1304 AMD 1:2011 建筑物结构部件的耐火试验方法(修改件1)

Method of fire resistance test for structural parts of buildings (Amendment 1)

JIS A 1301 AMD 1:2011 建筑物木制结构部件的防火试验方法(修改件1)

Method of fire test for wooden structural parts of buildings (Amendment 1)

BS 476-10:2009 建筑材料和结构的防火试验.防火测试及其输出量的原理、选择、任务和应用指南

This part of BS 476 describes the general principles of fire testing and identifies the specific objectives/outputs of the BS 476 series of test methods and their related European (EN) and International (ISO) Standards. It provides guidance as to which test should be used for which purpose and how the results from those tests generally define the role of the test in any prescriptive or functional regulatory regime. It is not intended to be used for determining the conformity of any product or construction to Essential Requirement 2 of the European Construction Product Directive [1].

Fire tests on building materials and structures – Part 10: Guide to the principles, selection, role and application of fire testing and their outputs

JIS A 1301:1994 建筑物木结构部分的防火试验方法

この規格は，建築物の壁・柱・はり・床（天井を含む。)などの木造部分の防火試験方法について規定する。

Method of fire test for wooden structural parts of buildings

JIS A 1304:1994 建筑物结构部件的耐火试验方法

この規格は，建築物の壁・柱・はり・床(天井を含む。)，屋根などの構造部分の耐火試験方法について規定する。

Method of fire resistance test for structural parts of buildings

JIS A 1302:1994 建筑物不易燃烧结构部件的防火试验方法

この規格は，建築物の壁?柱?はり?床(天井を含む。)などの不燃構造部分（鉄骨その他不燃材料を軸組とした構造部分)の防火試験方法について規定する。

Method of fire test for noncombustible structural parts of buildings

JIS A 1311:1994 建筑物防火门的防火试验方法

この規格は，建築物の開口部に設ける防火戸の防火試験方法について規定する。

Method of fire protecting test of fire door for buildings

DIN 4102-14:1990 建筑材料和构件的耐燃性能.用热辐射器测定地面覆层系统的燃烧特性

The standard describes a procedure for measuring the critical radiant flux of horizontally mounted floor-covering systems exposed to a graded radiant heat energy environment in a test enclosure, when ignited with a pilot flame.#,,#

Fire behaviour of building materials and elements; determination of the burning behaviour of floor covering systems using a radiant heat source

BS 476-32:1989 建筑材料和结构的燃烧试验.第32部分:建筑物内实物尺寸燃烧试验指南

Test rig design, specimens, ignition sources, data monitoring and recording.

Fire tests on building materials and structures - Guide to full scale fire tests within buildings

BS 476-6:1989 建筑材料和结构的燃烧试验.第6部分:制品火焰传播的试验方法

Determination of the fire test performance of products used as internal linings in buildings.

Fire tests on building materials and structures - Method of test for fire propagation for products

BS 476-13:1987 建筑材料和结构的防火测试 热辐照下产品可燃性的测量方法

Method for examining ignition characteristics of essentially flat materials, composites or assemblies.

Fire tests on building materials and structures. Method of measuring the ignitability of products subjected to thermal irradiance

BS 476-20:1987 建筑材料和结构的燃烧试验.第20部分:建筑构件耐火的测定方法(一般原理)

General details of test conditions, specimens, apparatus and criteria for fire resistance testing. Appendices give general guidance information, method for residual loadbearing capacity and operating instructions.

Fire tests on building materials and structures - Method for determination of the fire resistance of elements of construction (general principles)

BS 476-21:1987 建筑材料和结构的燃烧试验.第21部分:承重构件耐火的测定方法

Detailed test requirements for beams, columns, floors and flat roofs, and walls.

Fire tests on building materials and structures - Methods for determination of the fire resistance of loadbearing elements of construction

BS 476-24:1987 建筑材料和结构的防火测试 通风管道耐火性能测定方法

1 This International Standard specifies a method of test and criteria for the determination of the fire resistance of ver-tical and horizontal ventilation ducts under standardized fire conditions. 2 The general purpose of this test is to measure the ability of a representative duct or duct assembly to resist the spread of fire from one fire compartment to another without the aid of fire dampers. 3 It is applicable to vertical and horizontal ducts, with or without branches, taking into account joints, air supply and ex-haust openings, as well as suspension devices, etc. 4 This International Standard is not applicable to: a) ducts above fire-resisting suspended ceilings (horizon-tal membranes) in those cases where the ducts rely for their fire resistance on the performance of the ceiling; NOTE — Other tests are necessary for these ducts. b) ducts containing fire dampers at points where they pass through fire separations. NOTE — In order to assess the fire resistance of fire dampers, other tests are required. A method of test for fire dampers is under con-sideration as a subject for a future International Standard. 5 This International Standard is not appropriate for the following ducts unless the further criteria described in the an-nex are established to the satisfaction of the appropriate authority: a) ducts of materials which are extremely sensitive to ther-mal shock; NOTE — Thermal shock may affect such ducts in a way that would differ from the effect in this test, but the test may still be used where it can be established that sensitivity to thermal shock is within acceptable limits. b) smoke outlet ducts; NOTE — These ducts need to retain their integrity and cross-sectional area under fire conditions. Consequently criteria for ac-ceptance additional to those given in this International Standard are required. This International Standard is only applicable, therefore, to smoke outlet ducts if the criteria for integrity failure of a representative smoke outlet duct within the furnace and the loss of retention of cross-sectional area of such ducts are agreed between all parties concerned and are investigated and reported (see the annex). c) ducts lined on the inside with combustible material or which in practice may accumulate combustible deposits on their inside face (such as kitchen extract ducts). NOTE — Additional criteria regarding the insulation performance of the duct are required in this case (see the annex). 6 This International Standard does not take into considera-tion the effect of impact shock loading on ducts due to the col-lapse of supporting or adjacent structural members or other components, or of impact- or thermal shock loading resulting from the application of a water (hose) stream. NOTE — The method described in this International Standard should be used solely to measure and describe the properties of ducts and their supports in response to heat and flame under controlled laboratory conditions and should not by itself be con-sidered or used for the description, appraisal or regulation of the fire hazard of such ducts or supports under actual fire con-ditions.

Fire tests on building materials and structures. Method for determination of the fire resistance of ventilation ducts

BS 476-23:1987 建筑材料和结构的燃烧试验.第23部分:部件对结构耐火性作用的测定方法

Detailed test requirements for the contribution made by suspended ceilings to beams and by intumescent seals to doorsets and shutter assemblies.

Fire tests on building materials and structures - Methods for determination of the contribution of components to the fire resistance of a structure

BS 476-10:1983 建筑材料和结构的燃烧试验.第10部分:燃烧试验的原理和应用指南

Describes the general principles and application of methods in this series of standards for fire testing of building products, components and elements of construction.

Fire tests on building materials and structures - Guide to the principles and application of fire testing

BS 476-11:1982 建筑材料和构件的燃烧试验.第11部分:建筑材料放热的评定方法

Describes a method for assessing the heat emission from building materials when inserted into a furnace at a temperature of 750C.

Fire tests on building materials and structures - Method for assessing the heat emission from building materials