共找到 26 条与 相关的标准,共 2 页
Sanitary tapware - Automatic shut-off valves PN 10
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
Float operated valves. Specification for compact type float operated valves for WC flushing cisterns (including floats)
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves; German version EN 12201-4:2012
This document specifies: a) field of application; b) requirements for pipe interrupters with permanent atmospheric vent; c) dimensional, the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of pipe interrupters with permanent atmospheric vent, DN 10 to DN 20; d) test method and requirements for verifying these properties; e) marking and presentation; f) acoustics. This document specifies the characteristics of pipe interrupters with permanent atmospheric vent, DN 10 to DN 20 that are suitable for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h 90 °C. Backflow protection devices integrated in flushing valves are similar to DC and are not covered under this document. The requirements are stated in EN 12541.
Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D , type C
Sanitary tapware - General specifications for flow rate regulators.
The document specifies requirements and tests for manually operated piston type gate valves, stopvalves for tapping valves, gate valves and diaphragm valves which are not included in DIN EN 1213 up to nominal size DN 100 and up to PN 10 for domestic water supply.
Stopvalves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves, stopvalves for tapping valves, gate valves and diaphragm valves; Technical rule of the DVGW
The document specifies in connection to DIN EN 1213 dimensions, requirements and tests for straight pattern globe valves for nominal sizes DN 10 to DN 80 and up to PN 10 for domestic water supply.#,,#
Stopvalves for domestic water supply - Two-way valves - Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW
Stopvalves for domestic water supply - Two-way valves - Oblique bonnet type PN 10; Y-type valve; Technical rule of the DVGW
Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification.
Sanitary tapware. Automatic shut-off valves pn 10.
Requirements for nominal size $9H compact float operated valves, of reducing flow type incorporating a float and renewable seat or no less effective assembly for use at operation pressures between 0.1 and 14 bar.
Float operated valves - Specification for compact type float operated valves for WC flushing cisterns (including floats)
Specifies workmanship, dimensions and performance requirements for diaphragm type valves of nominal size 3/8 and 1/2, intended for use with floats complying with the requirements of BS 1968 and BS 2456.
Float operated valves - Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
Specifies materials, workmanship, dimensions and performance requirements for piston type valves of nominal size 3/8, 1/2, 3/4,1, 11/4, 11/2 and 2, intended for use with floats complying with the requirements of BS 1968 and BS 2456.
Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)
The standard applies in conjunction with DIN 3546 part 1 to straight pattern piston type gate valves with bonnet vertical to the pipe axis, with or without drain which are used as stopvalves for drinking water supplies on and in private property.#,,#
PN 10 piston type gate valves for use in drinking water supply systems
Sanitary tapware. General specifications for flow rate regulators.
Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) pn 10. Minimum flow pressure of 0,05 MPa (0,5 bar).
Valves and taps for buildings. Incline anti vacuum valves (straight or angled) da. General technical specifications.
Valves and taps for buildings. Non controllable pipe interruptor with intermediate discharge chamber. General technical specifications.
Valves and taps for buildings. Air gap with diverter and overflow ac. General specifications.
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号