T05 专用材料及其制品 标准查询与下载

GB/T 39897-2021 车内非金属部件挥发性有机物和醛酮类物质检测方法

本标准规定了车内非金属部件挥发性有机物和醛酮类物质检测的术语和定义、样品准备、包装、运输、接收、前处理及采样方法、测定及结果计算、试验报告等内容。本标准适用于M1 类和N1 类车辆乘员舱及行李舱内非金属部件挥发性有机物和醛酮类物质的采样和测定,其他类型车辆可参照执行。

Determination of volatile organic compounds and aldehydes and ketones in nonmetallic parts of vehicles

QC/T 1162-2022 汽车外饰件用蜂窝夹层结构制品

Honeycomb sandwich structure products for automotive exterior parts

QC/T 794-2020 内燃机工业滤纸

Internal combustion engine industrial filter paper

DB37/T 3141-2018 动车组座椅阻燃面料技术要求

Technical requirements for flame retardant fabrics for EMU seats

EN 13807:2017 运输气瓶-电池车辆和多元素气体容器(MEGCs)-设计,制造,鉴定和测试

This European Standard specifies the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes or bundles of cylinders. It is applicable to battery vehicles and MEGCs containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to battery vehicles for dissolved acetylene. This European Standard is not applicable to battery vehicles and MEGC for toxic gases with an LC50 value less than or equal to 200 ml/m3. This European Standard applies also to battery vehicles and MEGCs containing bundles of cylinders connected by a manifold which are dis-assembled from the battery vehicle and filled individually. This European Standard does not apply to battery vehicles and MEGCs containing pressure drums or tanks. This European Standard does not specify requirements for the vehicle chassis or motive unit. This European standard does not cover requirements for sea transportation. This European Standard is primarily intended for industrial gases other than Liquefied Petroleum Gases (LPG). At the time of publication of this European Standard, there is no European Standard for dedicated LPG battery vehicles.

Transportable gas cylinders - Battery vehicles - Design@ manufacture@ identification and testing

QC/T 1000.2-2015 汽车滤清器用非织布性能要求和测试方法 第2部分:空气滤清器用

本部分规定了空气滤清器用非织造布(以下简称滤布)的分类、要求、测试方法、检验规则、标志、包装、运输和储存。 本部分适用于空气滤清器用非织造布。

Performance requirements and test methods of non-woven on automotive filter.Part 2:Non-woven of filters for air filter

QC/T 1000.1-2015 汽车滤清器用非织布性能要求和测试方法 第1部分:乘驾室空气滤清器用

本部分规定了汽车乘驾室空气滤清器用非织造布(以下简称滤布)的分类、要求、测试方法、检验规则、标志、包装、运输和储存。 本部分适用于汽车乘驾室空气滤清器用非织造布。

Performance requirements and test methods of non-woven on automotive filter.Part 1:Non-woven of filters for passenger compartment

ISO 3537:2015 道路车辆.安全玻璃材料.力学性能试验

This International Standard specifies mechanical test methods relating to the safety requirements for all safety glazing materials in a road vehicle, whatever the type of glass or other material of which they are composed.

Road vehicles - Safety glazing materials - Mechanical tests

GOST 33683-2015 散装材料用1520 mm轮距有盖漏斗车的聚合物复合结构. 规格

Polymer composite constructions of covered hopper wagons of 1520 mm gauge for bulk materials. Specifications

CFR 49-571.10-2014 交通运输. 第571部分:联邦机动车辆安全标准. 第A子部分:总则. 第571.10节:指定的座位位置.

(a) Application. This section applies to passenger cars, trucks, multipurpose passenger vehicles, and buses manufactured on or after September 1, 2010. However, paragraph (b) of this section does not apply to trucks and multipurpose passenger vehicles with a gross vehicle weight rating greater than 10,000 lbs, school buses, police vehicles as defined in S7 of Standard No. 208 (49 CFR 571.208), firefighting vehicles, ambulances, or motor homes. To determine the number of passenger seating positions in school buses, see S4.1 of Standard No. 222 (49 CFR 571.222).

Transportaion. Part571:Federal motor vehicle safety standards. SubpartA:General. Section571.10:Designation of seating positions.

SAE J403-2014 SAE 碳钢的化学成分

In 1941, the SAE Iron and Steel Division, in collaboration with the American Iron and Steel Institute (AISI), made a major change in the method of expressing composition ranges for the SAE steels. The plan, as now applied, is based in general on narrower cast or heat analysis ranges plus certain product analysis allowances on individual samples, in place of the fixed ranges and limits without tolerances formerly provided for carbon and other elements in SAE steels. For years the variety of chemical compositions of steel has been a matter of concern in the steel industry. It was recognized that production of fewer grades of steel could result in improved del

Chemical Compositions of SAE Carbon Steels

SAE J671-2014 振动阻尼材料和底盘涂料

"Description of Material??The materials classified under this specification are: a. Mastic vibration damping materials used to reduce the sound emanating from metal panels. b. Mastic underbody coatings used to give protection and some vibration damping to motor vehicle underbodies@ fenders@ and other parts. Numbering System PREFIXES??The prefix ""D"" is used to indicate a cut back vibration damping material and the prefix ""U"" is used to indicate a cut back underbody coating material. Should a water emulsion be desired@ the prefix should be followed by the letter ""E."" Should a solvent-water emulsion be desired@ the prefix should be followed by the letter ""F."" TYPES??The materials are further divided into types@ based on the decay rate in decibels per second (dB/s) at 21 ?? and classes@ based on the percentage of solids contained in the material. Example of the Use of Numbers??A cut back underbody coating having a decay rate of 5 dB/s and a solids content of 65% would be designated by the number U-565. An emulsion body damping material of medium decay rate and maximum solids content would be numbered DE-1090. Any combination of type and class could be used to suit the needs of the application."

Vibration Damping Materials and Underbody Coatings

QC/T 941-2013 汽车材料中汞的检测方法

本标准规定了汽车材料中汞含量的检测方法。“X射线荧光光谱法”适用于筛选和快速判定汽车材料中汞的含量。“冷原子吸收光谱法、原子荧光光谱法、电感耦合等离子体原子发射光谱法或电感耦合等离子体质谱法”适用于定量测定汽车材料中汞的含量。“直接测汞法”适用于定量测定汽车材料中汞的含量。

Test methods of mercury in automobiles materials

QC/T 943-2013 汽车材料中铅、镉的检测方法

本标准规定了汽车材料中铅、镉含量的检测方法。“X射线荧光光谱法”适用于筛选和快速判定汽车材料中铅、镉的含量。“光电直读光谱法测定钢铁、铜及铜合金、铝及铝合金材料中的铅、镉”适用于定量检测汽车材料中钢铁、铜及铜合金、铝及铝合金棒状或块状材料中铅、镉元素的含量。“原子吸收光谱法、电感耦合等离子体原子发射光谱法或电感耦合等离子体质谱法测定汽车材料中铅、镉含量”适用于定量检测汽车材料中铅、镉的含量。

Test methods of lead and cadmium in automobiles materials

QC/T 942-2013 汽车材料中六价铬的检测方法

本标准规定了汽车零部件及材料中六价铬含量的检测方法。其中:“X射线荧光光谱法”适用于采用X射线荧光光谱法筛选和快速判定汽车材料中六价铬的含量。“金属防腐镀层中六价铬定性试验”适用于采用点滴试验法和沸水萃取法定性确定汽车防腐镀层中六价铬的存在。“金属防腐镀层中六价铬含量测定”适用于采用沸水萃取、比色法定量测定汽车防腐镀层中六价铬的含量。“金属防腐镀层中六价铬定性试验”和“金属防腐镀层中六价铬含量测定”适用于无附加覆盖层(例如:油膜、水基或溶剂型聚合物膜或蜡膜)的镀层。“聚合物材料和电子材料中六价铬含量测定”适用于采用碱液萃取、比色法测定汽车聚合物材料和汽车电子材料中六价铬的含量,不适用于聚乙烯(PE)和乙烯-乙酸乙烯酯共聚物(EVAC)材料。其他汽车材料,如玻璃、陶瓷、织物和油漆涂层中的六价铬含量参照本方法测定。“皮革材料中六价铬含量测定”适用于采用磷酸盐液萃取、比色法测定汽车皮革材料中六价铬的含量。

Test methods of hexavalent chromium in automobiles materials

QC/T 944-2013 汽车材料中多溴联苯（PBBs）和多溴二苯醚（PBDEs）的检测方法

本标准规定了汽车材料中多溴联苯和多溴二苯醚含量的检测方法。“X射线荧光光谱法”适用于用X射线荧光光谱法筛选和快速判定汽车材料中溴的含量。“气相色谱-质谱(GC - MS)联用法”适用于用气相色谱-质谱联用法测定汽车材料中多溴联苯和多溴二苯醚的含量。

The methods of polybrominated biphenyls and polybrominated diphenyl ethers in automotive materials

DIN EN ISO 14451-3:2013 点火制品.机动车辆点火制品.第3部分:标记(ISO 14451-3-2013).德文版本EN ISO 14451-3-2013

Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO 14451-3:2013); German version EN ISO 14451-3:2013

SAE J1119-2013 翻转防护结构(ROPS)和落物防护结构(FOPS)用钢制品

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. The purpose of this information report is to provide concepts for rational selection and application of materials for Rollover protective structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited t

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)

SAE J369-2013 聚合内饰材料易燃性的水平试验方法

This SAE Standard pertains to automotive vehicles and off-road, self-propelled work machines used in construction, general purpose industrial, agriculture, forestry, and specialized mining machinery. This standard does not address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish safety and health practices and determine the applicability of regulatory limitations prior to use. Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed when conducting this test.

Flammability of Polymeric Interior Materials Horizontal Test Method

NF R19-900-10*NF EN ISO 14451-10:2013 点火制品.机动车辆点火制品.第10部分:半成品要求和分类

Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: requirements and categorization for semi finished products