共找到 168 条与 环境条件 相关的标准,共 12 页
本文件利用一种描述辐射带动态涨落的模型,给出了航天器(根据轨道和设计寿命)遭受的粒子注量的计算方法。该准动态地球辐射带模型根据输入参数(各类指数)来确定动态变化,而输入参数均选自容易获得并与地球辐射带动态变化高度相关的参数。 本文件适用于航天器设计等领域。
Space environment—Procedure for obtaining worst case and confidence level of fluence using the quasi-dynamic model of earth's radiation belts
本文件给出了航天器用商业现货(COTS)器件的电离总剂量效应、单粒子效应和位移损伤效应的评估方法。 本文件适用于低轨道(LEO)卫星用COTS器件辐射效应评估。其他轨道航天器用COTS器件可参考使用。
Space environment—Evaluation of radiation effects on Commercial-Off-The-Shelf (COTS) parts for use on low-orbit satellite
本文件描述了基于PAMELA在轨测量数据的近地空间带电粒子通量。 本文件适用于低高度(300km~600km)上能量大于100 MeV至地磁截止刚度的质子,以及能量大于或等于70 MeV至地磁截止刚度的电子和正电子的通量计算,并用于确定高能带电粒子对航天器设备或航天员的影响。
Space environment—Model of high energy radiation at low altitudes (300km~600 km)
本文件给出了开展航天材料空间环境效应地面模拟试验过程中所涉及的空间典型轨道空间环境因素的选取、航天材料空间环境效应模拟的一般原则、航天材料性能退化的物理和化学机制、航天材料空间环境效应退化的物理和数学模型,规定了航天材料空间环境效应地面模拟试验的通用要求和试验装置要求,提出了开展航天材料空间环境效应地面模拟试验的建议。 本文件适用于航天器设计、航天器寿命预估、航天材料空间环境效应地面模拟试验以及航天材料在轨期间的性能演化分析。
Space environment—General principles and criteria of space environmental effect simulation test for space materials
本文件给出了估算地球同步轨道(GEO)太阳质子长期(大于11 年的太阳活动周)注量的方法及选择太阳质子注量模型的置信度的指南。 本文件适用于太阳电池的性能退化预估。电荷耦合器件(CCD)、图像敏感器(APS)等光电器件的性能退化预估参照使用。
Space environment—Solar proton fluences at GEO and guideline for selection of confidence level in statistical model of solar proton fluencies
本文件描述了产生航天器表面最恶劣电位差的空间等离子体环境,以及如何使用模拟程序估算航天器表面最恶劣电位差。 本文件包含地球同步轨道(GEO)、地球极轨道(PEO)、中地球轨道(MEO)的等离子体的温度和密度,不包含低地球轨道(LEO)的等离子体的温度和密度。
Space environment—Plasma environments for generation of worst case surface electrical potential differences for spacecraft
Galactic cosmic ray model
Process for determining solar irradiances
本标准规定了民用机场与地面航空无线电台(站)电磁环境测试基本要求、测试频段、测试地点及测试报告的要求。 本标准适用于对民用机场与地面航空无线电台(站)电磁环境的测试与评估。
Standards for testing of electromagnetic environment of civilian airport and aeronautical radio ground stations
This specification covers natural sand in granular form.
Sand, Airport Snow and Ice Control
(a) Except as provided in §145.51(e) or paragraph (b), (c), or (d) of this section, a person who meets the requirements of subparts A through E of this part is entitled to a repair station certificate with appropriate ratings prescribing such operations specifications and limitations as are necessary in the interest of safety.
Aeronautics and Space. Part145:Repair stations. Section145.53:Issue of certificate.
本部分规定了民用飞机机载设备结冰试验条件和试验方法。 本部分适用于民用飞机上能受到结冰(霜)影响的机载设备。
Environmental conditions and test procedures for airborne equipment of civil airplane.Part 13: Icing test
本部分规定了民用飞机机载设备盐雾环境试验条件和试验方法。 本部分适用于民用飞机上会受到盐雾影响的机载设备。
Environmental conditions and test procedures for airborne equipment of civil airplane.Part 12: Salt fog test
本部分规定了两类稳态加速度试验,并规定了四种加速度严酷等级来模拟民用飞机机载设备使用中可能遇到的缓变加速度环境。 本部分适用于民用飞机机载设备正常飞行过程中受机动过载诱发的加速度环境。紧急着陆情况不包括在本部分范围内,这种情况应参考HB 6167.5-2014。
Environmental conditions and test procedures for airborne equipment of civil airplane.Part 16: Acceleration test
本部分规定了民用飞机机载设备防水试验条件和试验方法。 本部分适用于能受到冷凝水、滴水、雨和喷水影响的机载设备。 本部分不适用于气密密封设备(永久密封且不透气)的检验。
Environmental conditions and test procedures for airborne equipment of civil airplane.Part 8: Waterproofness tset
本部分规定了民用飞机机载设备温度和压力环境试验条件及其相应的试验验证方法。 本部分适用于民用飞机上会受到高、低温和气压环境影响的机载设备。
Environmental conditions and test procedures for airborne equipment of civil airplane.Part 2: Temperature and altitude test
本部分规定了确定民用飞机机载设备磁影响的试验要求和试验方法。 本部分适用于产生磁影响的机载设备,用于确定设备的磁影响,协助选择设备在飞机上的安装位置,确保设备能按其性能规范要求正常工作,并不干扰邻近的其他设备。
Environmental conditions and test procedures for airborne equipment of civil airplane.Part 17: Magnetic effect test
本部分规定了民用飞机机载设备电压尖峰的试验要求和试验方法。 本部分适用于民用飞机机载设备交直流电源线,用于确定当设备端口承受来自交流或直流电源线的电压尖峰影响时,是否能正常工作并符合其性能规范的要求。
Environmental conditions and test procedures for airborne equipment of civil airplane.Part 19: Voltage spike test
本部分规定了民用飞机机载设备流体污染试验条件和试验方法。 本部分适用于民用飞机上安装在经常受到流体污染位置上的机载设备。
Environmental conditions and test procedures for airborne equipment of civil airplane.Part 9: Fluids susceptibility test
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号