V15 复合材料与固体燃料 标准查询与下载

HB 8635-2022 航空复合材料成型用真空袋薄膜规范

Specification of vacuum bagging film used for aviation composite materials

HB 8633-2022 航空复合材料成型用可剥布规范

Specification of peel ply used for aviation composite materials

HB 8632-2022 航空复合材料成型用隔离膜规范

Specification of release film used for aviation composite materials

HB 8634-2022 航空复合材料成型用透气毡规范

Specification of breather used for aviation composite materials

HB 8604-2021 飞机复合材料机翼前缘和尾翼前缘结构设计要求

Design requirements for aircraft composite wing leading edge and tail leading edge structures

HB 8606-2021 飞机复合材料结构修理要求

Aircraft composite structure repair requirements

HB 8603-2021 飞机复合材料副翼结构设计要求

Design requirements for aircraft composite aileron structures

EN 6034:2015 航空航天系列.碳纤维增强塑料.测试方法.层间断裂韧性能源测定.II - GIIC模式

This standard specifies the procedure to determine the mode II interlaminar fracture toughness energy GIIC of carbon fibre composites manufactured from unidirectional tape or woven fabric. This standard does not give any directions necessary to meet health and safety requirements. It is the responsibility of the user of this standard to consult and establish appropriate health and safety precautions.

Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC

EN 6033:2015 航空航天系列.碳纤维增强塑料.测试方法.层间断裂韧性能源测定.I - GIC模式

This standard specifies the procedure to determine the mode I interlaminar fracture toughness energy GIC of carbon fibre composites manufactured from unidirectional tape or woven fabric. This standard does not give any directions necessary to meet health and safety requirements. It is the responsibility of the user of this standard to consult and establish appropriate health and safety precautions.

Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC

HB 7618-2013 聚合物基复合材料力学性能数据表达准则

Data expression guidelines for mechanical properties of polymer matrix composites

HB/Z 409-2013 树脂基复合材料制件机械加工工艺

Machining Technology of Resin Matrix Composite Parts

HB/Z 411-2013 树脂基复合材料制件装配工艺

本指导性技术文件规定了树脂基复合材料制件装配工艺的材料、工具与设备、装配环境、工艺过程 控制、质量控制、人员、安全等要求。 本指导性技术文件适用于航空产品树脂基复合材料制件装配。

Assembly Technology of Resin Matrix Composite Parts

HB/Z 410-2013 树脂基复合材料制件修补工艺

Repair Technology of Resin Matrix Composite Parts

ASTM D7618-13(2017) 与航空火花点火式发动机燃料混合用乙基叔丁基醚(ETBE)的标准规格

1.1 This specification covers requirements for fuel grade ethyl tertiary-butyl ether (ETBE) that may be used for blending with fuels for aviation spark-ignition engines where permissible. Other ETBE grades available in the marketplace that do not comply with the requirements of this specification, are not suitable for blending with aviation fuels. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

QJ 20019.3-2011 复合固体推进剂安全性能试验方法

Composite solid propellant safety performance test method

QJ 20019.1-2011 复合固体推进剂安全性能试验方法

本部分规定了復合固體推進劑爆砍感度试验的试验原理、试验要求、试验程序、数据处理、试验 记录和试验报告。 本部分适用于复合固体推进剂的爆又感度测试。其它固体推进剂可参照执行。

Composite solid propellant safety performance test method

QJ 20019.2-2011 复合固体推进剂安全性能试验方法

本部分规定了复合固体推进剂火焰感度试验的试验原理、试验要求、试验程序、数据处理、系统校 HES试验記錄和试验报告。 本部分适用于复合固体推进剂及其药浆、组分的火焰感度测试。其它固体推进剂可参照执行。

Composite solid propellant safety performance test method

QJ 20019.4-2011 复合固体推进剂安全性能试验方法

本部分规定了复合固体推进剂热爆炸临界温度试验的试验原理、试验要求、试验程序、数据处理、 试验记录和试验报告。 本部分适用于复合固体推进剂的热爆炸临界温度测试。其它固体推进剂可参照执行。

Composite solid propellant safety performance test method

QJ 20049-2011 复合固体推进剂研制、生产防静电安全规定

本标准规定了复合固体推进剂防静电的管理要求、静电危害控制技术措施以及静电检测的项目与方法。 本标准适用于复合固体推进剂研制、生产及发动机总装、测试过程防静电安全控制和管理。

Anti-static safety rules for composite solid propellant development and production

SAE AIR5373A-2010 地面支援设备中的燃料(汽油或柴油除外)

This SAE Aerospace Information Report (AIR) is intended as a source of comparative information and is subject to change to keep pace with experience and technical advances. This document describes currently used fuels which may be used in the future. Conventional gasoline and diesel fuels are intentionally omitted from this document. The purpose of this document is to provide basic information regarding fuels which can be used in aircraft ground support equipment. This document is recommended for use by those engaged in the design, selection, or maintenance of ground support equipment, and their fuel systems.

Fuels in Ground Support Equipment (Other Than Gasoline or Diesel)