01.040.25;25.120.40 标准查询与下载

DIN ISO 11090-1:2001 机床.放电刻模机床的试验条件.术语和精度试验.第1部分:单柱式机床(横向滑动型工作台和固定型工作台) (ISO 11090-1:1998)

The document specifies, with reference to ISO 230-1 and ISO 230-2, geometric and machining tests and tests for checking accuracy and repeatability of numerically controlled positioning axes for general purpose and normal accuracy die sinking electro-discharge machines (EDM).

Machine tools - Test conditions for die sinking electro-discharge machines (EDM); Terminology and testing of accuracy - Part 1: Single column machines (cross slide table type and fixed table type) (ISO 11090-1:1998)

DIN ISO 11090-2:2001 机床.放电刻模机床的试验条件(EDM).术语和精度试验.第2部分:双柱式机床(滑动头型和横向滑动工作台型) (ISO 11090-2:1998)

The document specifies, with reference to ISO 230-1 and ISO 230-2, geometric and machining tests and tests for checking accuracy and repeatability of numerically controlled positioning axes for general purpose and normal accuracy die sinking electro-discharge machines (EDM).

Machine tools - Test conditions for die sinking electro-discharge machines (EDM); Terminology and testing of accuracy - Part 2: Two column machines (slide head type and cross slide table type) (ISO 11090-2:1998)

NF E60-134-1:2000 机床.冲模放电机器的试验条件.术语和精确度试验.第1部分:单柱机器

Machines tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1 : single column machines (cross slide table type and fixed table type).

NF E60-140:2000 机床.金属丝放电加工机床的试验条件.术语和准确度试验

Machine tools - Test conditions for wire electrical discharge machines (wire EDM) - Terminology and testing of the accuracy.

NF E60-134-2:2000 机床.冲模放电机器的试验条件.术语和精确度试验.第2部分:双柱机

Machines tools - Test conditions for die sinking electro-discharge machines (EDM) -Terminology and testing of the accuracy - Part 2 : two column machines (slide-head type and cross-slide table type).

BS ISO 14137:2000 机床.金属线放电加工机床的试验条件.术语和准确度试验

ISO 14137 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-4, geometric tests, tests of accuracy and repeatability of numerically controlled positioning axes, machining test and circular tests for general purpose, normal-accuracy wire electrical-discharge machines (wire EDM). It also specifies applicable tolerances correspond-ing to the above-mentioned tests. ISO 14137 is applicable to single column machines of cross slide table type and double column type machines. ISO 14137 deals only with the testing of accuracy of the machine. It does not apply to the testing of the machine operation (vibration, abnormal noise, stick-slip motion of components, etc.) nor to machine characteristics (such as speeds, feeds, etc.), which should generally be carried out before testing the accuracy. ISO 14137 provides the terminology used for the principle components of the machine and the designation of the axes in accordance with ISO 841.

Machine tools - Test conditions for wire electrical-discharge machines (wire EDM) - Terminology and testing of the accuracy

ISO 14137:2000 机床 线切割机床(EDM丝)检验条件 术语及精度检验

ISO 14137 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-4, geometric tests, tests of accuracy and repeatability of numerically controlled positioning axes, machining test and circular tests for general purpose, normal-accuracy wire electrical-discharge machines (wire EDM). It also specifies applicable tolerances correspond-ing to the above-mentioned tests. ISO 14137 is applicable to single column machines of cross slide table type and double column type machines. ISO 14137 deals only with the testing of accuracy of the machine. It does not apply to the testing of the machine operation (vibration, abnormal noise, stick-slip motion of components, etc.) nor to machine characteristics (such as speeds, feeds, etc.), which should generally be carried out before testing the accuracy. ISO 14137 provides the terminology used for the principle components of the machine and the designation of the axes in accordance with ISO 841.

Machine tools - Test conditions for wire electrical discharge machines (wire EDM) - Terminology and testing of the accuracy

BS ISO 11090-2:1998 机床.放电加工刻模机的试验条件.术语和精度试验.双柱架式凿岩机(移动头型和纵横移动工作台型)

To be read in conjunction with BS ISO 230-1:1996, BS ISO 230-2:1997

Machine tools - Test conditions for die sinking electrodischarge machines (EDM) - Terminology and testing of accuracy - Two column machines (slide-head type and cross-slide table type)

ISO 11090-2:1998 机床 电腐蚀加工机床(EDM)检验条件 术语和精度检验 第2部分:双柱式机床(移动主轴头型和十字移动工作台型)

This part of ISO 11090 specifies, with reference to ISO 230-1 and ISO 230-2, geometric and machining tests and tests for checking accuracy and repeatability of numerically controlled positioning axes for general purpose and normal accuracy die sinking electro-discharge machines (EDM). It also specifies the applicable tolerances, corresponding to the above-mentioned tests. This part of ISO 11090 is applicable to two column machines of slide-head type and cross-slide table type. This part of ISO 11090 deals only with the verification of accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before the testing of the accuracy. This part of ISO 11090 provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841. NOTE — In addition to the terms used in the three official ISO languages (English, French and Russian), annex A of this part of ISO 11090 gives, for information, the equivalent terms in the Dutch, German, Italian and Swedish languages; these are published under the responsibility of the national member bodies for Belgium (IBN), Germany (DIN), Italy (UNI) and Sweden (SIS). However, only the terms given in the official languages can be considered as ISO terms.

Machine tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 2: Two column machines (slide-head type and cross-slide table type)

BS ISO 11090-1:1998 机床.放电加工刻模机的试验条件.术语和精度试验.第1部分:单柱架式凿岩机(纵横移动型工作台和固定型工作台)

To be read in conjunction with BS ISO 230-1:1996, BS ISO 230-2:1997

Machine tools - Test conditions for die sinking electrodischarge machines (EDM) - Terminology and testing of accuracy - Single column machines (cross slide table type and fixed table type)

ISO 11090-1:1998 机床 电腐蚀加工机床(EDM)检验条件 术语和精度检验 第1部分:单柱式机床(十字型工作台和固定型工作台)

This part of ISO 11090 specifies, with reference to ISO 230-1 and ISO 230-2, geometric and machining tests and tests for checking accuracy and repeatability of numerically controlled positioning axes for general purpose and normal accuracy die sinking electro-discharge machines (EDM). It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 11090 is applicable to single column machines of cross slide table type and fixed table type. This part of ISO 11090 deals only with the verification of the accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before the testing of accuracy. This part of ISO 11090 provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841. NOTE — In addition to the terms used in the three official ISO languages (English, French and Russian), annex A of this part of ISO 11090 gives the equivalent terms in the Dutch, German, Italian and Swedish languages; these are published under the responsibility of the National member bodies for Belgium (IBN), Germany (DIN), Italy (UNI) and Sweden (SIS). However, only the terms given in the official languages can be considered as ISO terms.

Machine tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1: Single column machines (cross slide table type and fixed table type)