共找到 332 条与 机械工程制图 相关的标准,共 23 页
本文件规定了在产品技术文件中与基准和基准体系标注及理解相关的术语、规则和方法。 本文件同时提供了所涉及概念的相应解释,以便于理解。 本文件定义了建立基准和基准体系的规范操作集(见GB/T24637.2)。其检验操作集(见
Geometrical product specifications (GPS)—Geometrical tolerancing—Datums and datum systems
本文件规定了非刚性零件的尺寸和公差标注方法,及其被检测验证时所需约束的图样标注规范。 本文件适用于非刚性零件。
Geometrical product specifications (GPS)—Dimensioning and tolerancing—Non-rigid parts
Geometrical product specifications(GPS)—Fundamentals—Concepts, principles and rules
Geometrical product specifications(GPS)—Geometrical tolerancing—Profile tolerancing
Geometrical product specifications (GPS)—Geometrical tolerancing—Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
Technical drawings—The detailed simplified representation of rolling bearings
GB/T 4458的本部分规定了三种常用的轴测图的绘制方法。本部分适用于手工及计算机绘制轴测图;也适用于三维模型投影工程图。
Mechanical drawings.Axonometric drawings
本标准规定了机构运动简图中使用的图形符号。 本标准适用于绘制机构运动简图。
Mechanical drawings.Graphical symbols for kinematic diagrams
GB/T4457 的本部分规定了机械图样中各种剖面符号及其画法。 本部分适用于机械图样的剖视图和断面图中剖面区域表示。
Mechanical drawings.Basic conventions for representing areas on cuts and sections
本标准规定了机械工程中用计算机辅助设计(以下简称CAD)时的制图规则。 本标准适用于在计算机及其外围设备中进行显示、绘制、打印的机械工程图样机及有关技术文件。 本标准是GB/T 18229在机械CAD制图中的补充。
Mechanical engineering drawings rules of CAD
本标准规定了几何公差的基准和基准体系的定义、在技术图样上的标注和在实际应用中的体现方法。 本标准适用于采用模拟基准要素和基准要素的拟合要素建立基准的基本规则。
Geometrical Product Specifications(GPS).Geometrical tolerancing.Datums and datum system
本标准规定了未定义形状边的术语和在技术制图中表示未定义形状边的状态的准则,同时也规定了所使用图形符号的比例和尺寸。 本标准适用于工程图样中对未定义的形状边标注,lx 45。形状的几何定义,可参考68/T 4458.4和68/T l6675.2的规定。
Technical drawing--Drawing presentation--Vocabulary and indications for edges of undefined shape
本部分规定了剖视图和断面图表示法。 本部分适用于在机械制图中用正投影法(见GB/T 14692)绘制的技术图样。
Mechnical drawings--General principles of presentation--Sections
本部分规定了机械制图中所用图线的一般规则。 本部分适用于机械工程图样。
Mechanical drawings--General principles of presentation-Lines
本部分规定了视图表示法。 本部分适用于在机械制图中用正投影法(见GB/T 14692)绘制的技术图样。 除特别指明外,本部分规定的图样画法系第一角画法。
Mechanical drawings--General principles of presentation-Views
本标准规定了GB/T l7450中非连续线的主要的基本类型及其线素的计算方法和基本要求。本标准适用于CAD系统用图线。
Technical drawings preparation of lines by CAD systems
本标准是对图样画法和尺寸注法的补充规定。主要用于在装配图与详图上对棒料、型材及其断面的简化表示,涉及范围还包括: ——由棒料、型材及其组合元件组成的金属构件(包括:桥梁、构架、桩基等); ——起重和运输设备; ——贮液罐和压力容器; ——升降机、电梯、传送带等。
Technical drawings-Simplified representation of bars and profile sections
本标准规定了剖视图和断面图的基本表示法。 本标准适用于正投影法绘制的技术图样,如机械、电气、建筑和土木械程图样等。
Technical drawings--General principles of presentation--Sections and cuts
本标准规定了剖面区域的基本表示法。 本标准适用于各种技术图样,如机械、电气、建筑和土木工程图样等。
Technical drawings--General principles of presentation--Representation of areas on cuts and sections
本标准规定了图线的名称、型式、结构、标记及画法规则。 本标准适用于各种技术图样,如机械、电气、建筑和土木工程图样等。
Technical drawings--Basic conventions for lines
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号