共找到 312 条与 工程建设制图 相关的标准,共 21 页
本标准适用于下列制图方式绘制的图样: 1.手工制图; 2.计算机制图。 本标准适用于总图专业的下列工程制图: 1.新建、改建、扩建工程的各阶段的总图制图; 2.原有工程的总平面实测图; 3.总图的通用图、标准图。
Standard for general layout drawings
本标准适用于下列制图方式绘制的图样: 1 手工制图; 2 计算机制图。 本标准适用于给水排水专业的下列工程制图: 1 新建、改建、扩建工程的各阶段设计图、竣工图; 2 总平面设计图、竣工图; 3 原有建筑物、构筑物、总平面图的实测图; 4 通用设计图、标准设计图。
Standard for water supply and drainage drawings
本标准是建筑结构专业制图的基本规定,适应于工程制图中下列制图方式绘制的图样: 1.手工制图; 2.计算机制图。 本标准适用于建筑结构专业下列的工程制图: 1.新建、改建、扩建工程的各阶段设计图、竣工图; 2.原有建筑物、构筑物等的实测图; 3.通用设计图、标准设计图。
Standard for structural drawings
本标准适用于下列制图方式绘制的图样: 1 手工制图; 2 计算机制图。 本标准适用于暖通空调专业下列的工程制图: 1 新建、改建、扩建工程的各阶段设计图、竣工图; 2 原有建筑物、构筑物等的实测图; 3 通用设计图、标准设计图。
Standard for heating,ventilation and air conditioning drawings
本标准适用于下列制图方式绘制的图样: 1.手工制图; 2.计算机制图。 本标准适用于建筑专业和室内设计专业下列的工程制图: 1.新建、改建、扩建工程的各阶段设计图、竣工图; 2.原有建筑物、构筑物等的实测图; 3.通用设计图、标准设计图。
Standard for architectural drawings
本标准规定了房屋建筑计算机辅助设计(以下简称CAD)过程中制图统一规则。主要包括定义、二维制图、三维图形、图层和文件交换格式。 本标准适用于房屋建筑和建筑工程相关领域中的CAD制图及软件开发,也适用于在计算机及其外围设备中进行建立、显示、绘制房屋建筑CAD图形及有关技术文件。
General rules of drawings in building engineering CAD
本标准规定了中心孔的表示法。 本标准适用于在机械图样中不需要确切地表示出形状和结构的标准中心孔。非标准中心孔也可参照采用。
Mechanical drawings--Representation of centre holes
This document specifies general requirements for the preparation of construction drawings intended for the field assembly of prefabricated structures for building and civil engineering works.
Technical product documentation (TPD) - Construction documentation - Drawings for the assembly of prefabricated structures (ISO/FDIS 4172:2023)
预制底板、预制剪力墙墙板、预制外墙、预制叠合梁、预制框架柱等构件的标准化设计除应执行本标准外,尚应符合国家和上海市现行有关标准的规定。 构件标准元素 standardized element of component,指预制混凝土构件的制作尺寸、钢筋排布和出筋定位等。 A类预制剪力墙墙板 class A precast shear panel,不含边缘构件的预制剪力墙墙板。 B类预制剪力墙墙板 class B precast shear panel,含无翼墙墙端的一字型构造边缘构件的预制剪力墙墙板。 A类预制剪力墙墙板适用于抗震等级为二、三、四级的结构构件,B类预制剪力墙墙板适用于抗震等级为三、四级的结构构件。
Intelligent construction prefabricated components- standards for standardized component design
本图集中给出的预制构件接口构造和预制构件连接构造中,钢筋除注明外均为示意,具体由设计确定。 本图集适用于智能建造项目中预制构件的接口设计和连接设计,其它采用预制构件的项目可参照执行。 本图集尺寸以毫米(mm)为单位,标高以米(m)为单位。 本图集仅表达适用于智能建造的预制构件接口构造和连接构造做法,未尽之处均应满足国家及地方现行有关标准和国标图集的要求。 预制构件中的钢筋应优先采用钢筋焊接网、焊接封闭箍、连续复合箍筋和钢筋桁架等成型钢筋制品。成型钢筋制品应符合国家现行标准《混凝土结构工程施工规范》GB50666和《混凝土结构成型钢筋应用技术规程》JGJ366中的有关规定。
Intelligent Construction Prefabricated Components—Interface and Connection Design Standard Atlas
Technical product documentation. Construction documentation. Indication of limit deviations
Specifications for Joint Surveying and Mapping Database of Engineering Construction Projects
Technical specifications for joint surveying and mapping of engineering construction projects
This document specifies methods for the indication of limit deviations on construction documents.
Technical product documentation — Construction documentation — Indication of limit deviations
BS EN ISO 7519. Technical product documentation (TPD). Construction documentation. General principles of presentation for general arrangement and assembly drawings
BS EN ISO 4172. Technical product documentation (TPD). Construction documentation. Drawings for the assembly of prefabricated structures
本文件适用于厦门地区新建、改建、扩建的建筑与小区、城市道路、绿地与广场、城市水系等的海绵城市建设技术。本文件用于指导设计人员进行海绵城市建设工程设计,指导施工人员施工。
Sponge City Construction Design Standard Atlas
目次 前言 II 1 范围 2 规范性引用文件 3 术语和定义 4 培训内容要求 4.1 职业道德要求 4.2 基础知识要求 4.3 各等级BIM建模师专业知识要求 4.4 管理要求 5 考核要求 5.1 课时安排 5.2 学员申请条件 5.3 培训考核 6 培训评定
Talent training requirements for BIM Modeler
Design of construction works. General requirements
System of design documents for construction. Rules for execution of the working documentation of external gas pipelines
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号