共找到 32 条与 其他制图标准 相关的标准,共 3 页
本部分规定了齿轮的表示法。 本部分适用于机械图样中齿轮的绘制。
Mechanical drawings conventional representation of gears
本部分规定了机械图样中尺寸公差与配合公差的标注方法。 本部分适用于機械圖樣中尺寸公差(線性尺寸公差和角度尺寸公差)與配合的標注方法。
Mechanical drawings Indication of tolerances for size and of fits
本部分规定了弹簧的表示法。 本部分适用于机械制图中弹簧的表示法。
Mechanical drawings Conventional reprensentation of springs
本部分规定了管路、管件和阀门等图形符号的轴测图画法。本部分适用于输送液体、气体及其他介质的管系图的绘制。
Graphical symbols for piping systems-Axonometric representation of graphical symbols for piping,piping accessories and valves etc
本部分规定了在机械装配图中零件、部件序号的编排方法。本部分适用于机械装配图的绘制。
Mechanical drawings item references and its arrangement for assembling drawings
本部分规定了在图样中标注尺寸的基本方法。 本部分适用于机械图样的绘制。
Mechanical drawings dimensioning
Employment and Entrepreneurship Services Part 5: Enterprise Shared Employment Guidance and Service Standards
本文件适用于井工开采煤矿防突预测图的绘制。
Specifications for drawing prediction maps for coal mine outburst prevention
The provisions of this document apply to the process of drawing up mine plans. This document contains the colours required for the representation. These colours are used to improve legibility, for emphasis or if a representation in colour is required. Any colours already specifie
Mine plans - Colours
本标准依据GB/T 1228《钢结构用高强度大六角头螺栓》、GB/T1229《钢结构用高强度大六角螺母》、GB/T1230《钢结构用高强度垫圈》、GB/T 1231《钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件》、GB/T3632《钢结构用扭剪型高强度螺栓连接副》、GB/T3633《钢结构用扭剪型高强度螺栓连接副技术条件》、GB/T5780《六角头螺栓C级》、GB/T41《六角头螺目C级》、GB/T95《平垫圈C级》等标准要求,明确了电厂钢结构图纸中关于尺寸标注、杆件编号方式、焊缝标注等方面的深化设计要求。
Specification for detailed design of power plant steel structure drawings
This document establishes rules and conventions for particular use with technical drawings on glassware, for example, laboratory glassware or glassware used in other technical fields. Optical parts are not, however, included herein.
Technical product documentation (TPD) - Technical drawings for glassware (ISO 6414:2020)
This document establishes rules and conventions for particular use with technical drawings on glassware, for example, laboratory glassware or glassware used in other technical fields. Optical parts are not, however, included herein.
Technical product documentation (TPD) — Technical drawings for glassware
Internal Inspection Regulations for Power Plant Boilers
This part of ISO 6412 specifies supplementary rules, in addition to the general rules given in ISO 6412-1, applicable to isometric representation. Isometric representation shall be used where the essential features are to be shown clearly in three dimensions.
Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric projection
This part of ISO 6412 specifies simplified representations used in technical drawings for terminal features of ventilation and drains in pipeline systems.
Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems
This part of ISO 6412 specifies rules and conventions for the execution of simplified drawings for the representation of all kinds of pipes and pipelines made of all sorts of materials (rigid and flexible). It shall be used whenever pipes or pipelines have to be represented in a simplified manner. For the purposes of this part of ISO 6412, the figures illustrate the text only and should not be considered as design examples. NOTE — This part of ISO 6412 might also be of some use for the representation of similar installations, such as ventilation or airconditioning systems; in such cases, the term "duct", etc. should be substituted for the term "pipe".
Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation
How to draw drawings of pressure vessel inspection report
The basic method of drawing expanded graph
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号