07.100.99 有关微生物学的其他标准 标准查询与下载

GB/T 37247-2018 光催化材料及制品抗真菌性能测试方法及评价

Test method for evaluating antifungal activity of photocatalytic materials and products

BS ISO 7581:2023 干燥环境中使用的无孔抗菌表面的杀菌活性评价

1   Scope This document specifies the test conditions and the levels of activity to determine the bactericidal activity of non- porous surfaces used in a dry environment. It defines a protocol to validate the bactericidal character of a surface and to measure its performance. It is not intended to be used to substantiate cleaning or disinfecting properties. This document is applicable to surfaces claiming to have an activity against vegetative bacteria. The obligatory test conditions are defined in this document. It does not apply to porous surfaces . It does not refer to methods for testing the toxicological and ecotoxicological properties of the surfaces. This document is used to measure bactericidal action, not bacteriostatic activity of a surface.

Evaluation of bactericidal activity of a non-porous antimicrobial surface used in a dry environment

T/SDBFIA 005-2023 抗生素发酵用花生氮源

本文件规定了抗生素发酵用花生氮源的术语和定义、技术要求、采样、试验方法、检验规则、标识标签、包装和贮存。

Peanut nitrogen source for antibiotic fermentation

T/WJQMA 07-2023 高浓度微生物菌剂在甜瓜上的应用技术规程

本技术规程规定了高浓缩微生物菌剂的溶解方法，高浓缩微生物菌剂在甜瓜上使用的时 间和用量。 本技术规程适用于五家渠地区甜瓜上高浓缩微生物菌剂的应用技术。 本技术规程适用于五家渠地区同类地区参照使用

Technical regulations for the application of high-concentration microbial inoculants on melons

ASTM E2564-23 用直接显微镜计数法计数金属加工液中分枝杆菌的标准实施规程

Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method

T/SDBFIA 004-2023 纤维素酶制剂

对纤维素酶感官要求、理化指标、试验方法、检验规则等进行了明确规定。

Cellulase preparation

T/SDBFIA 003-2023 木聚糖酶制剂

对木聚糖酶感官要求、理化指标、试验方法、检验规则等进行了明确规定。

Xylanase preparation

T/SDBFIA 002-2023 果胶酶制剂

对果胶酶感官要求、理化指标、试验方法、检验规则等进行了明确规定。

Pectinase preparation

T/SDBFIA 001-2023 β-1,3-1,4-葡聚糖酶制剂

对β-1,3-1,4-葡聚糖酶感官要求、理化指标、试验方法、检验规则等进行了明确规定。

β-1,3-1,4-Dextranase preparation

ASTM D7816-23 滚道卤水、卤水腌制的生皮和皮肤中嗜盐细菌和蛋白质分解细菌计数的标准试验方法

Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins

ISO 8124-12:2023 玩具安全 — 第 12 部分：微生物安全

Safety of toys — Part 12: Microbiological safety

ISO/FDIS 7581:2023 干燥环境中使用的无孔抗菌表面的细菌活性评估

Evaluation of bactericidal activity of a non-porous antimicrobial surface used in a dry environment

ASTM E2471-23 使用种子琼脂筛选评估地毯抗菌活性的标准测试方法

1.1 This test method is designed to evaluate (qualitatively) the presence of antimicrobial activity in or on carpets. Use this test method to qualitatively evaluate both antibacterial and antifungal activity. 1.2 Use half strength (nutrient and agar) tryptic soy agar as the inoculum vehicle for bacteria and half strength potato dextrose agar as the inoculum vehicle for mold conidia. Use of half strength agars may reduce undue neutralization of an antimicrobial due to excessive organic load. 1.3 This test method simultaneously evaluates (both visual and stereo-microscopic) antimicrobial activity both at the fiber layer and at the primary backing layer of carpet. 1.4 Use this test method to assess the durability of the antimicrobial treatments on new carpets, and on those repeatedly shampooed or exposed to in-use conditions. 1.5 Knowledge of microbiological techniques is required for the practice of this test method. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets

DB14/T 2749-2023 野生食用菌种质资源收集和保存规范

本文件规定了野生食用菌种质资源形态结构的的术语和定义，资源收集要求，形态和生态记录要点和保存规范等。 本文件适用于野生食用菌资源种质资源收集和保存。

Specifications for the collection and preservation of wild edible fungus germplasm resources

DB14/T 2739-2023 桑黄设施栽培技术规程

本文件规定了桑黄设施栽培的场地条件、栽培与管理、病虫害防治、子实体采收和贮藏、生产档案等内容。 本文件适用于桑黄设施栽培生产技术与管理。

Phellinus Phellinus Protected Cultivation Technical Regulations

ASTM E2315-23 使用定时杀菌程序评估抗菌活性的标准指南

1.1 This guide covers an example of a method that measures the changes in a population of aerobic microorganisms within a specified sampling time when antimicrobial test materials are present. 1.1.1 Several options for organism selection and growth, inoculum preparation, sampling times and temperatures are provided. 1.1.2 When the technique is performed as a specific test method, it is critical that the above mentioned variables have been standardized. 1.1.3 Antimicrobial activity of specific materials, as measured by this technique, can vary significantly depending on variables selected. 1.1.4 Test Method E2783 may be referenced as an example of using fixed conditions and set variables to evaluate antimicrobial efficacy of water-miscible compounds. 1.1.5 This guide serves as a general teaching document for evaluating the antimicrobial activity using a variety of conditions to offer the flexibility needed in test conditions to cover a broad range of microorganisms and test substances. 1.1.6 It is important to understand the limitations of in vitro tests, especially comparisons of results from tests performed with different parameters. As an example, test results of microorganisms requiring growth supplements or special incubation conditions may not be directly comparable to organisms evaluated without those stated conditions. 1.2 Knowledge of microbiological techniques is required for this procedure. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure

T/ZNZ 163-2023 畜禽养殖场细菌耐药性水平评价技术规范

本文件规定了畜禽养殖场细菌耐药性水平评价的设备和材料、样品采集、菌株分离与药物敏感性试 验、评价对象、评价方法、记录和生物安全的要求。 本文件适用于猪、鸡、鸭等畜禽养殖场的大肠埃希菌和肠球菌（屎肠球菌或粪肠球菌）耐药性水平 评价。

Technical specification for the assessment of antibacterial resistance in livestock and poultry farms

ASTM D6329-98(2023) 使用静态环境室评估室内材料支持微生物生长能力的方法学开发指南

1.1 Many different types of microorganisms (for example, bacteria, fungi, viruses, algae) can occupy indoor spaces. Materials that support microbial growth are potential indoor sources of biocontaminants (for example, spores and toxins) that can become airborne indoor biopollutants. This guide describes a simple, relatively cost effective approach to evaluating the ability of a variety of materials to support microbial growth using a small chamber method. 1.2 This guide is intended to assist groups in the development of specific test methods for a definite material or groups of materials. 1.3 Static chambers have certain limitations. Usually, only small samples of indoor materials can be evaluated. Care must be taken that these samples are representative of the materials being tested so that a true evaluation of the material is performed. 1.4 Static chambers provide controlled laboratory microenvironment conditions. These chambers are not intended to duplicate room conditions, and care must be taken when interpreting the results. Static chambers are not a substitute for dynamic chambers or field studies. 1.5 A variety of microorganisms, specifically bacteria and fungi, can be evaluated using these chambers. This guide is not intended to provide human health effect data. However, organisms of clinical interest, such as those described as potentially allergenic, may be studied using this approach. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers

ASTM E3011-22 艰难梭状芽胞杆菌孢子体外生产的标准操作规程

1.1 This practice is designed to propagate spores of Clostridioides diffıcile using liver broth. 1.2 It is the responsibility of the user of this practice to determine whether Good Laboratory Practices are required and follow when appropriate. 1.3 This practice should only be performed by those trained in microbiological techniques. 1.4 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for In vitro production of Clostridioides difficile Spores

22/30450670 DC BS ISO 7581.无孔表面基本杀菌活性的评估方法

BS ISO 7581. Method for the evaluation of basic bactericidal activity of a non-porous surface