11.120.99;55.100 标准查询与下载

DIN ISO 11418-5:2017 药品配制用容器及附件.第5部分:滴管组件(ISO 11418-5-2015)

Containers and accessories for pharmaceutical preparations - Part 5: Dropper assemblies (ISO 11418-5:2015)

BS ISO 11418-4:2006 制药用容器和附件.药片用玻璃瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of tablet glass bottles. Tablet glass bottles are applicable to primary packs used in direct contact with a drug. This part of ISO 11418 is applicable to tablet glass bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations in solid and liquid dosage forms which are not intended for parenteral use.

Containers and accessories for pharmaceutical preparations - Tablet glass bottles

BS ISO 11418-1:2006 药剂制备容器及附件.点滴用玻璃瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of drop-dispensing glass bottles. Drop-dispensing glass bottles are applicable to primary packs used in direct contact with a drug. This part of ISO 11418 is applicable to drop-dispensing glass bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations which are not intended for parenteral use.

Containers and accessories for pharmaceutical preparations - Drop-dispensing glass bottles

BS ISO 11418-2:2006 药剂制备容器及附件.糖浆用螺口玻璃瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of screw-neck glass bottles for pharmaceutical preparations in liquid form (syrups). Screw-neck glass bottles are applicable to primary packs used in direct contact with a drug. This part of ISO 11418 is applicable to screw-neck glass bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations which are not intended for parenteral use.

Containers and accessories for pharmaceutical preparations - Screw-neck glass bottles for syrups

BS ISO 11418-3:2006 药剂制备容器及附件.固体和液体计量方式螺口玻璃瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of screw-neck glass bottles (veral) for pharmaceutical preparations in solid and liquid dosage forms. Screw-neck glass bottles are applicable to primary packs used in direct contact with a drug. This part of ISO 11418 is applicable to screw-neck glass bottles (veral) used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations in solid and liquid dosage forms which are not intended for parenteral use.

Containers and accessories for pharmaceutical preparations - Screw-neck glass bottles (veral) for solid and liquid dosage forms

DIN ISO 11418-4:2005 药剂制备容器及附件.第4部分:片剂玻璃瓶

Containers and accessories for pharmaceutical preparations - Part 4: Tablet glass bottles (ISO 11418-4:2005); text in German and English

DIN ISO 11418-1:2005 药剂制备容器及附件.第1部分:玻璃点滴瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of drop-dispensing glass bottles. Drop-dispensing glass bottles are applicable to primary packs used in direct contact with a drug.this part of ISO 11418 applies to drop-dispensing bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations which are not intended for parenteral use.#,,#

Containers and accessories for pharmaceutical preparations - Part 1: Drop-dispensing glass bottles (ISO 11418-1:2005); text in German and English

DIN ISO 11418-3:2005 药剂制备容器及附件.第3部分:固体和液体药剂用螺口玻璃瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of scew-neck glass bottles (veral) for pharmaceutical preparations in solid and liquid dosage forms. Screw-neck glass bottles are applicable to primary packs used in direct contact with a drug. This part of ISO 11418 applies to screw-neck glass bottles (veral) used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations in solid and liquid dosage forms which are not intended for parenteral use.#,,#

Containers and accessories for pharmaceutical preparations - Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms (ISO 11418-3:2005); text in German and English

DIN ISO 11418-2:2005 药剂制备容器及附件.第2部分:糖浆用螺口玻璃瓶

Containers and accessories for pharmaceutical preparations - Part 2: Screw-neck glass bottles for syrups (ISO 11418-2:2005); text in German and English

ISO 11418-2:2005 药剂容器及附件.第2部分:糖浆用螺口玻璃瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of screw-neck glass bottles for pharmaceutical preparations in liquid form (syrups). Screw-neck glass bottles are applicable to primary packs used in direct contact with a drug. This part of ISO 11418 is applicable to screw-neck glass bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations which are not intended for parenteral use.

Containers and accessories for pharmaceutical preparations - Part 2: Screw-neck glass bottles for syrups

ISO 11418-3:2005 药剂容器及附件.第3部分:固体和液体药剂用螺口玻璃瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of screw-neck glass bottles (veral) for pharmaceutical preparations in solid and liquid dosage forms. Screw-neck glass bottles are applicable to primary packs used in direct contact with a drug. This part of ISO 11418 is applicable to screw-neck glass bottles (veral) used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations in solid and liquid dosage forms which are not intended for parenteral use.

Containers and accessories for pharmaceutical preparations - Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms

ISO 11418-4:2005 药剂容器及附件.第4部分:片剂玻璃瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of tablet glass bottles. Tablet glass bottles are applicable to primary packs used in direct contact with a drug. This part of ISO 11418 is applicable to tablet glass bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations in solid and liquid dosage forms which are not intended for parenteral use.

Containers and accessories for pharmaceutical preparations - Part 4: Tablet glass bottles

ISO 11418-1:2005 药剂容器及附件.第1部分:玻璃点滴瓶

This part of ISO 11418 specifies the design, dimensions, material and requirements of drop-dispensing glass bottles. Drop-dispensing glass bottles are applicable to primary packs used in direct contact with a drug. This part of ISO 11418 is applicable to drop-dispensing glass bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations which are not intended for parenteral use.

Containers and accessories for pharmaceutical preparations - Part 1: Drop-dispensing glass bottles

DIN ISO 11418-7:1999 药品配制用容器及附件.第7部分:液体药剂用玻璃管制螺纹颈口瓶

Containers and accessories for pharmaceutical preparations - Part 7: Screw-neck vials made of glass tubing for liquid dosage forms (ISO 11418-7:1998)

ISO 11418-7:1998 药剂容器及附件 第7部分:液体药剂用管制玻璃螺口瓶

This part of ISO 11418 specifies the form, dimensions and capacities of glass vials for pharmaceutical preparations. It also specifies the material from which such containers shall be made and the performance requirements of those containers. This part of ISO 11418 applies to colourless or amber glass vials made from borosilicate or soda-lime-silica glass, made from glass tubing and intended to be used in the packaging, storage or transportation of pharmaceutical products.

Containers and accessories for pharmaceutical preparations - Part 7: Screw-neck vials made of glass tubing for liquid dosage forms

DIN ISO 11418-5:1998 药品配制用容器及附件.第5部分:滴管组件

The document specifies the design, dimensions, material and requirements of dropper assemblies consisting of a screw cap, dropper bulks and pipettes for the application and dosage of liquid pharmaceutical preparations. It is applicable to dropper assemblies uded in the medical field in order to deliver pharmaceutical preparations containes in screw neck bottles according to ISO 1418-1. Dropper assemblies are applicable to primary packs used in direct contact with the drug.#,,#

Containers and accessories for pharmaceutical preparations - Part 5: Dropper assemblies (ISO 11418-5:1997)

ISO 11418-5:1997 药剂容器及附件 第5部分:滴瓶组件

This part of ISO 11418 specifies the design, dimensions, material and requirements of dropper assemblies consisting of a screw cap, dropper bulbs and pipettes for the application and dosage of liquid pharmaceutical preparations. This part of ISO 11418 is applicable to dropper assemblies used in the medical field in order to deliver pharmaceutical preparations contained in screw neck bottles according to ISO 11418-1. Dropper assemblies are applicable to primary packs used in direct contact with the drug. NOTE — The potency, purity, stability and safety of a drug during its manufacture and storage can be strongly affected by the nature and performance of the primary pack.

Containers and accessories for pharmaceutical preparations - Part 5: Dropper assemblies

NF H35-037:1987 装瓶行业 “制药”型塑料螺旋环 尺寸

Industries de l'embouteillage - Bague à vis plastique type "pharmacie" - Dimensions.