13.020.60 产品寿命周期 标准查询与下载

GB/T 33222-2016 机械产品生命周期管理系统通用技术规范

本标准规定了机械产品生命周期管理系统的体系结构、功能要求、平台要求、集成要求和实施要求。 本标准适用于机械产品生命周期管理系统的开发及应用。

Common technical specifications of PLM for mechanical products

ASTM E3066-24 评估涉及生物质能源或化学品的相对可持续性的标准实施规程

Standard Practice for Evaluating Relative Sustainability Involving Energy or Chemicals from Biomass

T/TSNR 004-2024 竹制品碳足迹核算技术规范

前?言　 1适用范围　 2规范性引用文件　 3术语和定义　 4原则　 5产品碳足迹评价　 6竹制品碳足迹评价报告　 附录A产品描述信息清单　 附录B排放因子缺省值　 附录C含碳率　 附录D竹制品使用寿命　 附录E记录表格　 参考文献　

Technical specifications for carbon footprint accounting of bamboo products

T/GDGM 0021-2024 产品碳足迹 产品种类规则 铝合金轮毂

本文件规定了铝合金轮毂产品碳足迹核算和评价的功能单位、系统边界、数据描述要求、数据质量要求、可比性要求和报告要求，给出了数据取舍准则，描述了清单分析方法和碳足迹核算方法。

Product Carbon Footprint Product Category Rules Aluminum Alloy Wheels

T/GDACERCU 0024-2024 机织牛仔布生命周期评价技术规范

本文件规定了机织牛仔布生命周期评价的产品描述、系统边界、数据来源和要求、清单分析与环境影响评价、附加环境信息、Ⅲ型环境声明（EPD）报告要素、验证。

Production life cycle assessment specification for woven denim

T/GDGM 0020-2024 产品碳足迹 产品种类规则 滚动轴承

标准规定了滚动轴承产品碳足迹核算和评价的功能单位、系统边界、数据描述要求、数据质量要求、可比性要求和评价报告要求，给出了数据取舍准则，描述了清单分析方法和碳足迹核算方法。

Product carbon footprint—Product category rules—Rolling bearing

T/CAB 0318-2023 商用车燃料电池系统“领跑者”性能评价导则

本标准主要包含燃料电池系统评测所需测试的基础、核心及加分性能指标、目前及2026年对应先进指标、性能等级分级方法及对应试验方法。

Hydrogen Top Runner Evaluation Guidelines of Fuel Cell System For Commercial Vehicle

T/CAB 0319-2023 氢基绿色燃料评价方法及要求

本文件规定了氢基绿色燃料评价方法及要求。

Evaluation Methods and Requirements of Hydrogen-Based Green Fuel

T/ZSSD 0003-2023 氢能利用全生命周期（LCA）碳足迹 评价指南

本标准规定了氢能利用全链条LCA碳足迹评估的术语和定义、总体要求、报告、鉴定性评审等内容。

Hydrogen Energy Utilization Life Cycle (LCA) Carbon Footprint Assessment Guide

ASTM E3027-23 产品生命周期中与可持续性相关的化学品选择决策的标准指南

Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products

T/CAEE 001-2023 房间空气调节器全生命周期碳排放评价方法与要求

本标准内容包括范围、规范性引用文件、术语和定义、总则、评价要求、数据收集和数据质量、碳排放量定量计算、评价报告与应用。 术语和定义包括功能单位、评价单元、初级 、次级数据等术语。 总则针对评价目标和评价原则进行了说明。 评价要求包括：1）基本要求；2）评价要素；3）评价指标。 1）基本要求指出标准涉及的房间空气调节器应通过国家强制性产品认证； 2）评价要素包括功能单位、评价单元的划分、生命周期关键阶段的确定； 3）评价指标包括定性指标和定量指标，其中定性指标包括生产企业管理要求、产品供应链要求、产品安全与性能等指标符合性要求，定性指标可根据产品生产特点和产品特征确定；定量指标包括原材料获取阶段、产品制造阶段、储运和销售阶段、产品使用阶段和回收处理及处置阶段的碳排放要求。      数据收集和数据质量包括1）数据收集要求；2）数据质量要求： 1）数据收集包括的数据类型有初级数据和次级数据； 2）数据质量要求初级数据具有代表性、完整性、准确性、再现性、一致性等要求；次级数据要求有代表性、完整性和一致性。 碳排放定量计算包括：1）原材料获取阶段的数据收集和碳排放量计算；2）空气调节器制造阶段的数据收集和碳排放量计算；3）空气调节器储运和销售过程的数据收集和碳排放量计算；4）空气调节器使用过程的数据收集和碳排放量计算；5）空气调节器废弃后回收处理及处置过程的数据收集和碳排放量计算。 评价报告与应用包括1）评价报告；2）应用 1）评价报告应至少包括以下内容： 生产企业/组织的描述： 产品描述； 评价范围； 报告覆盖的时间段； 数据收集清单及情况说明； 产品碳排放计算过程和评价结果，以及产品其他相关阶段排放量； 附加信息（如质量和能源管理体系或制度信息进行描述）； 采用先进生产工艺或节能减排技术前后产品碳排放比较说明，或者与同类产品的碳排放比较说明； 进一步改进的措施建议。 2）评价报告应用指出评价报告应内容全面、数据完整、结论公正，并应将评价结果及时传递到被评价的相关企业及企业所在行业。

Carbon emission assessment methods and requirements for the entire life cycle of room air conditioners

ISO/DIS 14071:2023 环境管理 — 生命周期评估 — 严格审查流程和审查者能力：ISO 14044:2006 的附加要求和指南

Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006

ISO/DIS 14072:2023 环境管理 生命周期评价 组织生命周期评价的要求和指南

Environmental management — Life cycle assessment — Requirements and guidelines for organizational life cycle assessment

T/CAB 0245-2023 碱性水电解制氢系统碳足迹 评价方法及要求

本文件给出了碱性水电解制氢系统产品碳足迹的评价方法及要求，为量化碱性水电解制氢系统碳足迹提供方法，并为判断系统碳排放属性提供依据，引导高碳排放生产工艺向绿色清洁工艺转变，并鼓励开发新的碱性水电解制氢系统制备工艺。

Carbon Footprint Evaluation Methods and Requirements of Alkaline Water Electrolysis System for Hydrogen Production

T/CAB 0246-2023 移动实验室质子交换膜燃料电池用氢气品质检测通用技术规范

本文件给出了移动实验室质子交换膜燃料电池用氢气品质检测通用技术规范，为相关质量控制企业及质监部门提供标准参考，引导我国在氢气品质检测核心技术的不断迭代，从而进一步推动整个氢能产业可持续高质量发展。

General technical specification for hydrogen quality detection for proton exchange membrane fuel cell of mobile laboratory

ASTM E2921-22 与建筑规范、标准和评级系统相比使用的整个建筑生命周期评估的最低标准

1.1 This practice provides criteria to be applied irrespective of the assessment (LCA) tool that is used when LCA is undertaken at the whole building level to compare a final whole building design to a reference building design. 1.2 The purpose of this practice is to support the use of whole building Life Cycle Assessment (LCA) in building codes, standards, and building rating systems by ensuring that comparative assessments of final whole building designs relative to reference building designs take account of the relevant building features, life cycle stages, and related activities in similar fashion for both the reference and final building designs of the same building. 1.3 The criteria do not deal with building occupant behavior, possible future changes in building function, building rehabilitation or retrofit, or other matters that cannot be foreseen or reasonably estimated at the design or permitting stage, or both where this practice applies. 1.4 Only environmental impacts and aspects of sustainability are addressed in this practice. The social and economic impacts and aspects of sustainability are not addressed in this practice. 1.5 This practice does not deal with basic LCA methodology, calculation methods or related matters that are covered in cited international standards. 1.6 This practice does not supersede or modify existing ISO standards for the application of LCA at the product level, nor does it address any of the following related applications: 1.6.1 Aggregation of building products Environmental Product Declarations (EPD) at the whole building level; 1.6.2 Rules for applying EPDs in a building code, standard, or rating system; and 1.6.3 Comparability of building product EPDs. NOTE 1—ISO 14025 and ISO 21930 provide guidance on use and comparability of building products EPDs. 1.7 This practice does not specify the impact categories or sustainability aspects to be addressed in building codes, standards, or building rating systems and users of this practice conform to the impact category requirements specified in the applicable code, standard, or rating system. 1.8 The text of this standard contains notes that provide explanatory material. These notes shall not be considered as requirements of the standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems

ISO/TS 14074:2022 环境管理.生命周期评估.标准化、加权和解释的原则、要求和指南

Environmental management — Life cycle assessment — Principles, requirements and guidelines for normalization, weighting and interpretation

ASTM E3106-22 基于科学和风险的清洁工艺开发和验证标准指南

1.1 This guide applies the life-cycle approach to cleaning process validation, which includes the development, qualification, and verification of cleaning processes. It is applicable to pharmaceuticals (including active pharmaceutical ingredients (APIs)); all dosage forms; over-the-counter medicinal and neutraceutical products, veterinary products, biologics, clinical supplies, advanced therapy medicinal products (ATPM), medical device manufacturing; and is also applicable to other health, cosmetics, and consumer products. 1.2 This guide is focused only on the cleaning of equipment product contact surfaces and medical device surfaces and does not cover disinfection, sterilization, or non-product contact surfaces (which are covered under other existing guides: Ref (1),2 USP , Guide E2614, ISO 14698, and ISO 14937). 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Science-Based and Risk-Based Cleaning Process Development and Validation

ISO/CD 14072 环境管理“生命周期评估”组织生命周期评估的要求和指南

Environmental management — Life cycle assessment — Requirements and guidelines for organizational life cycle assessment

ISO/CD 14071 环境管理“生命周期评估”关键审核流程和审核员能力：ISO 14044:2006 的附加要求和指南

Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006