13.030.50;55.020 标准查询与下载

ISO/TR 16218:2013 包装业和环境.化学品回收过程

Packaging and the environment - Processes for chemical recovery

ISO 18604:2013 包装与环境.材料回收利用

This International Standard specifies the requirements for packaging to be classified as recoverable in the form of material recycling while accommodating the continuing development of both packaging and recovery technologies and sets out procedures for assessment of meeting the requirements of this International Standard. This International Standard cannot by itself provide presumption of meeting the requirements. The procedure for applying this International Standard is contained in ISO 18601.

Packaging and the environment - Material recycling

ISO 18606:2013 包装与环境.有机再循环

This International Standard specifies procedures and requirements for packaging that are suitable for organic recycling. Packaging is considered as recoverable by organic recycling only if all the individual components meet the requirements. Therefore, packaging is not considered recoverable by organic recycling if only some of the components meet the requirements laid down in this International Standard. However, if the components can be easily, physically separated before disposal, then the physically separated components can be individually considered for organic recycling. This International Standard is applicable to organic recycling of used packaging but does not address regulations that exist regarding the recoverability of any residual packaged goods. For each of the packaging components the following four aspects are addressed: a) biodegradation; c) negative effects on the biological process; b) disintegration during biological waste treatment process (i.e. composting); This International Standard does not provide information on requirements for the biodegradability of used packaging which ends up in the soil environment as litter, because littering is not considered as a recovery option. This International Standard is also not applicable to biological treatment undertaken in small installations by householders. d) negative effects on the quality of the resulting compost, including the presence of high levels of regulated metals and other substances hazardous to the environment. This International Standard establishes the requirements for packaging suitable for organic recycling. NOTE “Organically recoverable”, “compostable”, or “compostable packaging in municipal and industrial composting facilities” or “biodegradable during composting” are expressions considered to be equivalent to organically recyclable for the purposes of this International Standard. The procedure for applying this International Standard is contained in ISO 18601.

Packaging and the environment - Organic recycling

DS/CEN/TR 13688:2008 包装 材料回收 防止持续阻碍回收的物质和材料要求报告

This Report provides some examples of substances and materials that may cause a sustained impediment in the recycling activities, and is intended to assist in the assessment requirements set out in the standard EN 13430.It describes substances or materials which cause problems or inhibit the recycling process, or which have a negative influence on the quality of recycled material, and for which it is considered that technological solutions will not be developed in the near future.These examples are however qualified by the fact that the recycling operations can vary from region to region and state to state, that technology is constantly changing, and that t

Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling

PD CEN/TR 13688:2008 包装.材料回收.防止持续阻碍回收的物质和材料的要求报告

This Report provides some examples of substances and materials that may cause a sustained impediment in the recycling activities, and is intended to assist in the assessment requirements set out in the standard EN 13430. It describes substances or materials which cause problems or inhibit the recycling process, or which have a negative influence on the quality of recycled material, and for which it is considered that technological solutions will not be developed in the near future. These examples are however qualified by the fact that the recycling operations can vary from region to region and state to state, that technology is constantly changing, and that the use to which the recycled material is put will also determine whether such substances and materials are a problem.

Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling [Superseded: DS DS/CEN/CR 13688]

DS/CEN/TR 14520:2007 包装 再利用 评估再利用系统性能的方法

This Technical Report gives methods of assessing the performance of a reuse system related to the proportion of reused packaging in use. This may be measured by:- the average number of rotations during a calculation period and the lifetime; or- the reuse ratio.The choice of method will vary according to the type of reuse system and information available.

Packaging - Reuse - Methods for assessing the performance of a reuse system

DS-håndbog 159:2007 包装和包装废弃物

This handbook contains the harmonized European standards for packaging and packaging waste. The standards specifies requirements and a procedure by which a person or organization responsible for placing packaging or packed products on the market (the supplier) may combine the application of six (mandated) packaging standards and one CEN report (in two parts).

Packaging and packaging waste

DS/EN 13430:2006 包装 可通过材料回收利用的包装要求

This document specifies the requirements for packaging to be classified as recoverable in the form of material recycling whilst accommodating the continuing development of both packaging and recovery technologies and sets out procedures for assessment of conformity with those requirements. The procedure for applying this standard is contained in DS/EN 13427.

Packaging - Requirements for packaging recoverable by material recycling

DS/EN 13429:2006 包装 重复使用

This document specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of conformity with those requirements including the associated systems. The procedure for applying this standard is contained in DS/EN 13427.

Packaging - Reuse

LST EN 13430-2005 包装 可通过材料回收利用的包装要求

Packaging - Requirements for packaging recoverable by material recycling

NF H60-120*NF EN 13430:2004 包装.通过材料再循环评定包装可回收性的要求

Packaging - Requirements for packaging recoverable by material recycling.

DIN EN 13430:2004 包装.通过材料再循环评定包装可回收性的要求

This document specifies the requirements for packaging to be classified as recoverable in the form of material recycling whilst accomodating the continuing development of both packaging and recovery technologies and sets out procedures for assessment of conformity with those requirements. This document cannot by itself provide presumption of conformity. The procedure for applying this document is contained in EN 13427.

Packaging - Requirements for packaging recoverable by material recycling; German version EN 13430:2004

DIN EN 13429:2004 包装.重新使用

This document specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of conformity with those requirements including the associated systems. This document cannot by itself provide presumption of conformity. The procedure for applying this document is contained in EN 13427.

Packaging - Reuse; German version EN 13429:2004

BS EN 13429:2004 包装.重复使用

This document specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of conformity with those requirements including the associated systems. This document cannot by itself provide presumption of conformity. The procedure for applying this document is contained in EN 13427.

Packaging - Reuse

BS EN 13430:2004 包装.通过材料再循环评定包装可回收性的要求

This document specifies the requirements for packaging to be classified as recoverable in the form of material recycling whilst accommodating the continuing development of both packaging and recovery technologies and sets out procedures for assessment of conformity with those requirements. This document cannot by itself provide presumption of conformity. The procedure for applying this document is contained in EN 13427.

Packaging - Requirements for packaging recoverable by material recycling

EN 13430:2004 包装.通过材料再循环评定包装可回收性的要求

This document specifies the requirements for packaging to be classified as recoverable inThe form of materialrecycling whilst accommodatingThe continuing development of both packaging and recovery technologies andsets out procedures for assessment of conformity with those requirements.This document cannot by itself provide presumption of conformity.The procedure for applyingThis documentis contained in EN 13427.

Packaging - Requirements for packaging recoverable by material recycling

EN 13429:2004 包装.重复使用

This document specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of conformity with those requirements includingThe associated systems.

Packaging - Reuse

DS/CEN/CR 13686:2001 包装 优化包装废弃物的能量回收

The objective of this report is to identify and define properties of packaging and packaging waste to allow optimization of energy recovery.

Packaging - Optimization of energy recovery from packaging waste