13.030.50;83.080.20 标准查询与下载
共找到 38 条与 相关的标准，共 3 页
This Technical Specification specifies an analytical method for testing food grade, recycled polyethylene terephthalate (PET). This analytical method provides / is intended to be used as a quality control check. This test identifies and quantifies certain specified contaminants. Such contaminants are referred to as Marker Compounds. The analytical method is applicable for use on PET samples and products at all stages in the recycling process and will therefore be useful to recycling companies producing commercial, recycled PET for food contact materials and articles, and the manufacturers of such articles. This Technical Specification is without prejudice to any existing legislation. NOTE Marker compounds are known to originate from two sources: from the PET material itself (i.e. residual monomers, degradation products or reaction/breakdown products); from food products that the PET has contacted during its "first use". WARNING - The use of this Technical Specification might involve hazardous materials, operations and equipment. Persons using this Technical Specification should be familiar with normal laboratory practise. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practises and to ensure compliance with any national regulatory conditions. IMPORTANT - It is absolutely essential that tests conducted according to this Technical Specification be carried out by suitably trained staff.
Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
- ICS
- 13.030.50;83.080.20
- CCS
- G31
- 发布
- 2015-06-01
- 实施
Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German version EN 15346:2014
- ICS
- 13.030.50;83.080.20
- CCS
- G32
- 发布
- 2015-01
- 实施
Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates; German version EN 15348:2014
- ICS
- 13.030.50;83.080.20
- CCS
- G32
- 发布
- 2015-01
- 实施
La présente Norme Européenne définit une méthode de spécification des conditions de livraison des recyclats de poly(éthylène téréphtalate) (PET).
Plastics - Recycled plastics - Characterisation of poly(ethylene terephtalate) (PET) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- G31
- 发布
- 2014-12-19
- 实施
- 2014-12-19
Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- G31
- 发布
- 2014-11-30
- 实施
- 2014-11-30
Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- G31
- 发布
- 2014-11-30
- 实施
- 2014-11-30
This European Standard defines a method of specifying delivery conditions for poly(vinyl chloride) (PVC) recyclates. It gives the most important characteristics and associated test methods for assessing of PVC recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of recycled PVC to agree on specifications for specific and generic applications. This European Standard does not cover the characterization of plastics wastes. See EN 15347. This European Standard is applicable without prejudice to any existing legislation.
Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- G32
- 发布
- 2014-11
- 实施
This European Standard defines a method of specifying delivery conditions for poly(ethylene terephthalate) (PET) recyclates. It gives the most important characteristics and associated test methods for assessing PET recyclates intended to be used for the production of semi-finished/finished products. It is intended for use by the supplier and purchaser of such materials, to assist them in agreeing on specifications. This European Standard is applicable without prejudice to any existing legislation.
Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- G32
- 发布
- 2014-11
- 实施
Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- 发布
- 2008-04-30
- 实施
- 2008-04-30
Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
- ICS
- 13.030.50;83.080.20
- CCS
- 发布
- 2008-04-30
- 实施
- 2008-04-30
Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- 发布
- 2008-04-15
- 实施
- 2008-04-15
Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- 发布
- 2008-04-15
- 实施
- 2008-04-15
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- 发布
- 2008-04-15
- 实施
- 2008-04-15
Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- 发布
- 2008-04-15
- 实施
- 2008-04-15
This European Standard defines a method of specifying delivery conditions for poly(vinyl chloride) (PVC) recyclates. It gives the most important characteristics and associated test methods for assessing of PVC recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of recycled PVC to agree on specifications for specific and generic applications. This Standard does not cover the characterisation of plastics wastes. See EN 15347. This standard is applicable without prejudice to any existing legislation.
Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- G31
- 发布
- 2008-02-29
- 实施
- 2008-02-29
This European Standard defines a method of specifying delivery conditions for Polypropylene (PP) recyclates. It gives the most important characteristics and associated test methods for assessing a single batch of PP recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of recycled PP to agree on specifications for specific and general applications. This standard does not cover the characterisation of plastics wastes. See EN 15347. This standard is applicable without prejudice to any existing legislation.
Plastics - Recycled plastics - Characterization of polypropylene (PP) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- G31
- 发布
- 2008-02-29
- 实施
- 2008-02-29
This European Standard defines a method of specifying delivery condition characteristics for polystyrene (PS) recyclates.It gives the most important characteristics and associated test methods for assessing a single batch of PS recyclates intended for use in the production of semi-finished/finished products.It is intended to support parties involved in the use of recycled PS to agree on specifications for specific and general applications.This standard does not cover the characterisation of plastics wastes. See EN 15347.This standard is applicable without prejudice to any existing legislation.
Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- ICS
- 13.030.50;83.080.20
- CCS
- 发布
- 2008-02-01
- 实施
- 2008-02-01
Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates.
- ICS
- 13.030.50;83.080.20
- CCS
- G31
- 发布
- 2008-02-01
- 实施
- 2008-02-16
Plastics - Recycled plastics - Characterisation of Polyethylene (PE) recyclates.
- ICS
- 13.030.50;83.080.20
- CCS
- G31
- 发布
- 2008-02-01
- 实施
- 2008-02-16
Plastics - Recycled plastics - Plastics recycling traceability and assessment of conformity and recycled content.
- ICS
- 13.030.50;83.080.20
- CCS
- G31
- 发布
- 2008-02-01
- 实施
- 2008-02-16
