13.030.50;83.160.01 标准查询与下载

PD CEN/TS 17045:2017 从生活轮胎的末端获得的材料-用于回收和再循环过程的全轮胎选择的质量标准

This European Standard provides criteria for the selection of whole end-of-life tyres (WELT) under different classes based on their size. It also provides criteria for determination of their suitability to be used in recycling and material recovery processes. The processes described in this document include sorting of WELT in order to determine their acceptance in recovery and recycling processes. Criteria regarding the reuse of tyres to be mounted again in a vehicle are not addressed in this document. This document does not cover the operational performance of the applications or the requirements of the materials for certain applications, which are usually agreed between the manufacturer and the customer. Solid tyres are excluded from the scope of this document.

Materials obtained from end of life tyres - Quality criteria for the selection of whole tyres@ for recovery and recycling processes

PD CEN/TS 16916:2016 从生活轮胎的末端获得的材料-用烘箱干燥法测定取样和测定水分含量的具体要求

This Technical Specification specifies a method for determining the total moisture content of materials obtained from End of Life Tyres (ELT) by drying samples in an oven. The method is applicable to chips, granulates, powders and textile derived from the treatment of End of Life Tyres. This document is not intended for the determination of moisture content in steel wires.

Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method

DIN SPEC 1066:2010 由废弃轮胎生产的材料.基于它们的尺寸规格和杂质以及它们的尺寸规格和杂质的测定方法的分类规范.德文版本CEN/TS 14243-2010

Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities; German version CEN/TS 14243:2010

BS DD CEN/TS 14243:2010 由废弃轮胎生产的材料.基于它们的尺寸规格和杂质以及它们的尺寸规格和杂质的测定方法的分类规范

This Technical Specification provides definitions for the categories of materials produced from end-of-life tyres based on their dimension(s) or impurities. It also provides test methods for the determination of the dimension(s) of the materials produced from all categories of end-of-life tyres at all steps of the treatment process as well as for the determination of impurities. The test methods described in this Technical Specification include sample collection and the preparation of a representative sample based on a sampling plan for the purpose of determining dimensions and impurities. This Technical Specification does not cover the operational performance or fitness for use of the materials which are deemed to be a function of agreement between the producer and the customer. This Technical Specification does not purport to address safety concerns associated with its use. It is the responsibility of the user of this Technical Specification to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities

PD CEN/TS 14243:2010 由废弃轮胎生产的材料.基于它们的尺寸规格和杂质的测定方法的分类规范

This Technical Specification provides definitions for the categories of materials produced from end-of-life tyres based on their dimension(s) or impurities. It also provides test methods for the determination of the dimension(s) of the materials produced from all categories of end-of-life tyres at all steps of the treatment process as well as for the determination of impurities. The test methods described inThis Technical Specification include sample collection and the preparation of a representative sample based on a sampling plan for the purpose of determining dimensions and impurities.This Technical Specification does not cover the operational performance or fitness for use of the materials which are deemed to be a function of agreement between the producer and the customer. NOTEThis Technical Specification does not cover downstream products prepared from the materials, including reclaimed or devulcanized rubber, surface-modified powders and pyrolytic output.This Technical Specification does not purport to address safety concerns associated with its use. It is the responsibility of the user of this Technical Specification to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities