13.040.30;13.100;25.160.10 标准查询与下载

BS EN ISO 15011-4:2018 焊接和相关工艺的卫生和安全性.烟雾和气体采样的实验室方法.第4部分:烟雾数据单

Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Fume data sheets

ISO 15011-5:2011 焊接和同类工艺过程中的健康和安全.实验室法烟气抽样.第5部分:采用热解气体色谱质谱联用法对焊接过程中所产生的热降解产品或全部或部分由有机材料制成的刻纹过深产品进行鉴定

This part of ISO 15011 specifies procedures for obtaining information about thermal degradation products generated when welding, cutting through, preheating and straightening metal treated with coatings composed wholly or partly of organic substances, e.g. shop primers, paints, oils, waxes and inter-weld materials such as adhesives and sealants. It is aimed primarily at test laboratories performing such procedures. The data generated can be used by coating manufacturers to provide information for inclusion in safety data sheets and by occupational hygienists to identify thermal degradation products of significance in the performance of risk assessments and/or workplace exposure measurements. The data cannot be used to estimate workplace exposure directly. This part of ISO 15011 is applicable to all coatings composed partly or wholly of organic materials that can be heated during welding and cutting, preheating and straightening to temperatures at which thermal degradation products are generated and where it is not apparent what those degradation products are.

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials us

ISO 15011-3:2009 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.第3部分:电弧焊时臭氧排放率的测定

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding

ISO 15011-2:2009 焊接和相关工艺中的健康和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:在电弧焊,切削加工和刨削槽时，一氧化碳(CO),二氧化碳(CO₂),氧化氮(NO)和二氧化氮(NO₂)排放率的测定

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO₂), nitrogen monoxide (NO) and nitrogen dioxide (NO<(Index)

ISO 15011-1:2009 焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.第1部分:电弧焊产生的烟尘排放率测定和烟尘采集分析

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis

EN ISO 15011-3:2009 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.第3部分:电弧焊时臭氧排放率的测定

This part of ISO 15011 defines a laboratory method for measuring the emission rate of ozone during arc welding, using a hood technique. The method is directed primarily at measuring ozone emission rate when using gas-shielded arc welding processes, but it can also be employed with other processes, e.g. self-shielded flux-cored arc welding, provided that welding can be performed automatically under the hood.

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009)