13.040.40;91.140.10 标准查询与下载

DIN CLC/TS 50612:2017 用于测量燃烧烟气参数的便携式电气设备.燃气用具的调试,服务和维护过程中的使用指南;德文版本CLC/TS 50612-2016

Portable electrical apparatus for the measurement of combustion flue gas parameters - Guide to their use in the process of commissioning, servicing and maintaining gas fired appliances; German version CLC/TS 50612:2016

DIN CLC/TS 50612:2014 用于测量燃烧烟气参数的便携式电气设备. 燃气中央供暖锅炉的调试, 服务和维护过程中的使用指南; 德文版本CLC/TS 50612-2013

Portable electrical apparatus for the measurement of combustion flue gas parameters - Guide to their use in the process of commissioning, servicing and maintaining gas fired central heating boilers; German version CLC/TS 50612:2013

BS PD CLC/TS 50612:2013 用于测量燃烧烟气参数的便携式电气设备. 燃气中央供暖锅炉的调试, 服务和维护过程中的使用指南

Portable electrical apparatus for the measurement of combustion flue gas parameters. Guide to their use in the process of commissioning, servicing and maintaining gas fired central heating boilers

DIN EN 50379-3:2013 用于测量加热器具燃烧烟气参数的便携式电气装置的规范. 第3部分:非法定燃气加热器具操作用设备的性能要求; 德文版本EN 50379-3-2012

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances; German version EN 50

DIN EN 50379-2:2013 用于测量加热器具燃烧烟气参数的便携式电气装置的规范. 第2部分:法定检查和评估用设备的性能要求; 德文版本EN 50379-2-2012

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment; German version EN 50379-2:2012

DIN EN 50379-1:2013 加热设施的燃烧排气参数测量用便携式电器规格.第1部分:通用要求和试验方法.德文版本EN 50379-1-2012

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods; German version EN 50379-1:2012

BS EN 50379-2:2012 加热设施的燃烧排气参数测量用便携式电器规格.用于法定检测和评估的仪器性能要求

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. Performance requirements for apparatus used in statutory inspections and assessment

BS EN 50379-3:2012 加热设施的燃烧排气参数测量用便携式电器规格.燃气式加热装置的非规定操作用装置的性能要求

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances

BS EN 50379-1:2012 用于加热器具燃烧废气参数测量的便携式电气装置规格.第1部分:通用要求和试验方法

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. General requirements and test methods

BS EN 50379-1:2005 用于加热器具燃烧废气参数测量的便携式电气装置规范 第1部分：一般要求和试验方法

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. General requirements and test methods

BS EN 50379-1:2004 用于加热器具燃烧废气参数测量的便携式电气装置规范.第1部分:一般要求和试验方法

This European Standard covers apparatus for measuring gas concentrations and other combustion parameters, as used in the installation and maintenance of heating appliances. Such apparatus may be used for testing the performance of appliances for different types of fuels, either by the installer, maintenance engineer or inspector. The apparatus may consist of different functional modules, which may be tested separately for complying with this standard and will be combined in different ways according to the different applications. The apparatus shall comply with requirements as specified in EN 50379-2 and/or EN 50379-3. This European Standard specifies general requirements for the construction, testing and performance of portable spot reading apparatus designed to give an assessment of specific combustion flue gas parameters, such as concentration of gaseous compounds, temperature and/or pressure, to check the combustion performance of heating appliances for domestic residential and commercial applications, using commercially available fuels. This standard excludes apparatus for – continuous emission, safety monitoring and control, and – use in vessels with an international load line.

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods

BS EN 50379-3:2004 加热设施的燃烧排气参数测量用便携式电器规范.燃气式加热装置的非规定操作用装置的性能要求

This European Standard covers apparatus designed for checking the performance of heating appliances by measuring flue gas parameters of gas fired heating appliances for domestic residential and commercial applications. The apparatus may consist of different functional modules which may be tested separately for complying with this standard, and will be combined in different ways according to the different applications. The apparatus shall comply with the general requirements as specified in EN 50379-1 and the performance requirements of EN 50379-3. This European Standard specifies the performance requirements of portable spot reading apparatus designed to detect specific combustion flue gas parameters, such as concentration of gaseous compounds, temperature and/or pressure, to be used to decide if maintenance for the appliance is required and for adjusting the appliance during maintenance. This standard excludes apparatus for - checking appliances using fuels other than gas, - continuous emission, safety monitoring and control, and - use in vessels with an international load line. NOTE 1 When this apparatus is used in industrial premises, national regulations shall be observed. NOTE 2 Apparatus may contain functional modules which are not covered by this standard e.g. measurement of smoke spot number (see Annex A of EN 267).

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances

BS EN 50379-2:2004 加热设施的燃烧排气参数测量用便携式电器规范.用于法定检测和评估的仪器性能要求

This European Standard covers apparatus designed to measure flue gas parameters of heating appliances for domestic residential and commercial applications using commercially available fuels in compliance with metrological specification. The apparatus may consist of different functional modules that may be tested separately for complying with this standard and will be combined in different ways according to the different applications. The apparatus shall comply with the general requirements as specified in EN 50379-1 and the performance requirements of EN 50379-2. This European Standard specifies the performance requirements of portable spot reading apparatus designed to give a measurement of specific combustion flue gas parameters such as concentration of gaseous compounds, temperature and/or pressure to be used for testing the compliance with national regulations for the above mentioned appliances. This standard excludes apparatus for -continuous emission, safety monitoring and control, and -use in vessels with an international load line. NOTE 1 When this apparatus is used in industrial premises, national regulations shall be observed. NOTE 2 Apparatus may contain functional modules that are not covered by this standard e.g. measurement of smoke spot number (see Annex A of EN 267).

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Performance requirements for apparatus used in statutory inspections and assessment

EN 50379-2:2004 设计用于加热设施燃料油气体参数测量的便携式电器规范.第2部分:法定检验及评估用装置的性能要求

This European Standard covers apparatus designed to measure flue gas parameters of heating appliances for domestic residential and commercial applications using commercially available fuels in compliance with metrological specification. The apparatus may consist of different functional modules that may be tested separately for complying with this standard and will be combined in different ways according to the different applications. The apparatus shall comply with the general requirements as specified in EN 50379-1 and the performance requirements of EN 50379-2. This European Standard specifies the performance requirements of portable spot reading apparatus designed to give a measurement of specific combustion flue gas parameters such as concentration of gaseous compounds, temperature and/or pressure to be used for testing the compliance with national regulations for the above mentioned appliances. This standard excludes apparatus for – continuous emission, safety monitoring and control, and – use in vessels with an international load line. NOTE 1 When this apparatus is used in industrial premises, national regulations shall be observed. NOTE 2 Apparatus may contain functional modules that are not covered by this standard e.g. measurement of smoke spot number (see Annex A of EN 267).

Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances — Part 2: Performance requirements for apparatus used in statutory inspections and assessment Incorporating Corrigendum No.