共找到 50 条与 相关的标准,共 4 页
本标准规定罐头内容物含锡量之测定。
Method of test for metal in canned food-Determination of tin
本标准规定依维生素丙还原吸收光度法之水及废水中磷酸盐检验法。适用浓度范围为 0.05~0.50mgP∕L(即,定量范围为 P2.5~25mg)。
Method of Test for Phosphate in Water and Wastewater (Absorption Spectrophotometry after Ascorbic Acid Reduction)
本标准规定依火焰式原子吸光光谱法之工业(包括事业场所)废水中钾定量法。定量范围:K 0.05~5mg∕L,重现精密度以变异系数表示为 2~10% (因装置,测定条件而有差异)。
Method of Test for Potassium in Industrial Waste Water (Flame Atomic Absorption Spectrophotometry)
本标准规定依火焰式原子吸光光谱法之工业(包括事业场所)废水中钠定量法。定量范围:Na 0.05~4mg∕L,重现精密度以变异系数表示为 2~10% (因装置,测定条件而有差异)。
Method of Test for Sodium in Industrial Waste Water (Flame Atomic Absorption Spectrophotometry)
本标准规定依火焰式原子吸光光谱法之工业(包括事业场所)废水中钙定量法。定量范围:Ca 0.2~4mg∕L,重现精密度:以变异系数表示为 2~10% (因装置,测定条件而有差异)。
Method of Test for Calcium in Industrial Waste Water (Flame Atomic Absorption Spectrophotometry)
本标准规定依火焰式原子吸光光谱法之工业(包括事业场所)废水中镁定量法。定量范围:Mg 20~400μg∕L,重现精密度:以变异系数表示为 2~10% (因装置,测定条件而有差异)。
Method of Test for Magnesium in Industrial Waste Water (Flame Atomic Absorption Spectrophotometry)
本标准规定工业(包括事业场所)废水中镁检验法。
Method of Test for Magnesium in Industrial Waste Water(Titrimetric method)
本标准规定工业(包括事业场所)废水中钙检验法。
Method of Test for Calcium in Industrial Waste Water(Titrimetric Method)
本标准规定工业(包括事业场所)废水中钾检验法。
Method of Test for Potassium in Industrial Waste Water(Flame Emission Spectrophotometric Method)
本标准规定工业(包括事业场所)废水中钠检验法。
Method of Test for Sodium in Industrial Waste Water(Flame Emission Spectrophotometric Method)
本标准适用于含氰离子浓度较高之工业废水之检验,定量范围为 CN-1mg∕1 以上。
Method of Test for Cyano - Compounds in Industrial Wastewater (Silver Nitrate Method)
本法适用于自水水、各种天然水、工业废水、者都市污水等之硫酸根离子浓度之检验。此等本水中之 SO4-2 浓度可能由数 ppm 至数万 ppm 之高,相差悬殊,俱供试水样含 SO4-2 总量 10mg 以上者,均可适用本法定量,对特别高浓度之水样,宜减少取用量,并适当稀释之。
Method of Test for Sulfate Ion in Water and Wastewater (Gravimetric Method)
本标准规定水与废水中之氟离子浓度之检验法。常各种干扰性离子之含量不超出可容许之程度时,可不经蒸馏而直接使用本法。
Method of Test for Fluoride in Water and Wastewater (SPADNS Method)
本标准规定以氟电极测定水与废水中氟化物浓度之检验方法。可定量范围为 0.1~100mgF-∕l。
Method of Test for Fluoride in Water and Wastewater (Electrode Method)
本标准规定水及废水中二氧化硅检验法以钼蓝法测定,此法适用于含二氧化硅量为 0.04~2 mg∕l。
Method of Test for Silica in Water and Wastewater - Heteropoly Blue Method
本标准规定水及废水中二氧化硅检验法,以钼黄法测定,此法适用于含二氧化硅量为 0.4~25 mg∕l。
Method of Test for Silica in Water and Wastewater - Molybdosilicate Method
本标准规定工业 (包括事业场所) 所排放废水中黺类检验法,采吸光 光度法。
Methods of Test for Phenols in Industrial Waste Water
本标准规定工业 (包括事业场所) 所排放废水中磷酸根离子检验法。采用吸光 光度法测定,将磷酸根离子与过剩之钼酸铵溶液反应,生成非均质聚合化合物 (hetero-polymer compound) 加氯化亚锡使之还原生成钼青 (molybdeunm-blue) 之发生色基,测定吸光度加以定量之方法。有水溶
Methods of Test for Phosphate Ion in Industrial Waste Water - Stanous Chloride Method
本标准规定工业 (包括事业场所) 所排放废水中界面活性剂之检验法。界面活性剂分为阴离子与磺酸阴离子界面活性剂二种,分别测定。
Methods of Test for Surface Acitve Agent in Industrial Waste Water
本标准规定工业 (包括事业场所) 所排放废水中对黺类检验法。
Method of Test for P - Cresols in Industrial Waste Water
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号