13.100;13.110;13.180 标准查询与下载

AS 4024.1501:2006 机械设备安全．控制系统的安全相关方面的设计．一般设计原则

Provides safety requirements and guidance on the principles to be used in the design of the safety related parts of machinery control systems. Categories are specified and the characteristics of the safety functions are described.

Safety of machinery - Design of safety related parts of control systems - General principles for design

AS 4024.1604:2006 机械设备安全．控制，联锁和保护的设计．紧急刹车．设计原则

Specifies functional requirements and the principles of design for the emergency stop of machinery without regard to the energy source used to control the functions. It does not apply to hand guided machines, hand held portable machines or to machines wh

Safety of machinery - Design of controls, interlocks and guarding - Emergency stop - Principles for design

AS 4024.1802:2006 机械设备安全．安全距离和安全间隙．用以防止下肢伸到危险区域的安全距离

Establishes values for safety distances to prevent access and to impede free access to danger zones of machinery, to prevent their being reached by the lower limbs of persons of 14 years and older. The distances apply where safety can be assured by dista

Safety of machinery - Safety distances and safety gaps - Safety distances to prevent danger zones being reached by the lower limbs

AS 4024.1803:2006 机械设备安全．安全距离和安全间隙．防止身体部位受到挤压的最小间隙

Establishes values for the minimum gaps relative to parts of the human body to prevent risk of crushing between two surfaces, at least one of which can move.

Safety of machinery - Safety distances and safety gaps - Minimum gaps to prevent crushing of parts of the human body

AS 4024.1901:2006 机械设备安全．显示，控制，动作器和信号．显示和控制动作器设计的人类工效学要求．人类与显示和控制动作器交互的一般原则

Specifies general principles to be followed when designing displays and control actuators on machinery to minimize errors on the part of the operator and to ensure an efficient interaction between the operator and equipment.

Safety of machinery - Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - General principles for human interactions with displays and control actuators

AS 4024.1702:2006 机械设备安全．人体测量．人类整个身体进入机械中所要求开口的尺寸的测定原则

Specifies the minimum opening dimensions required to gain whole body access to machinery. The dimensions are more applicable to non-mobile machinery as there may be additional specific requirements for mobile machinery.

Safety of machinery - Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery

AS 4024.1801:2006 机械设备安全．防止上肢进入危险区域的安全距离

Specifies the minimum safety distances from a barrier to the danger zone of a machine to prevent the danger zone being reached by the upper limbs of a person of age 3 years and above. The Standard is applicable only where safety can be assured by distanc

Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs

AS 4024.1902:2006 机械设备安全．显示，控制，动作器和信号．显示和控制动作器设计的人类工效学要求．显示

Specifies the ergonomic requirements for visual, audible and tactile displays for use in machinery. It provides guidance on the selection, design and location of displays to avoid potential ergonomic hazards associated with the use of displays.

Safety of machinery - Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays

AS 4024.1904:2006 机械设备安全．显示，控制，动作器和信号．标志；标识和动作．视觉；听觉和触觉信号的要求

Specifies requirements for visual, auditory and tactile methods of indicating safety related information. It sets out a system of colours, signs, marking and other means of indicating hazards and meeting emergencies. In addition, it sets out ways of codi

Safety of machinery - Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for visual, auditory and tactile signals

AS 4024.1202:2006 机械设备安全．一般原则．技术原则

Defines the technical principles required to achieve safety in the design of machinery. Does not deal with injury to domestic animals, property or the environment.

Safety of machinery - General principles - Technical principles

AS 4024.1601:2006 机械设备安全．控制，联锁和保护的设计．保护．固定和活动保护罩的设计和施工的一般要求

Specifies requirements for the design and construction of fixed and movable guards intended to afford protection from mechanical hazards at machinery.

Safety of machinery - Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards

AS 4024.1602:2006 机械设备安全．与护罩相连的联锁装置．设计和选择原则

Specifies principles for the design and selection of interlocking devices associated with guards. The principles are independent of the energy sources used on the machine.

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection

AS 4024.1903:2006 机械设备安全．显示，控制，动作器和信号．显示和控制动作器的设计的人类工效学要求．控制动作器

Provides guidance for the design, selection and location of manual control actuators so they are adapted to operator needs, are suitable for the control task in question and take into account the circumstances of their use.

Safety of machinery - Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators

AS 4024.1603:2006 机械设备安全．控制，联锁和保护的设计．防止意外启动

Specifies means incorporated at the design stage intended to prevent an unexpected machine start-up. The means include energy isolation and dissipation. Applies to all forms of energy source including those external to the machine, such as wind, gravity

Safety of machinery - Design of controls, interlocks and guards - Prevention of unexpected start-up

AS 4024.1905:2006 机械设备安全．显示，控制，动作器和信号．标志；标识和动作．标识要求

Specifies the requirements for marking machinery. Provides general rules on marking for identification, safe use in respect of mechanical and electrical hazards and in preventing the hazards arising from incorrect connections.

Safety of machinery - Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for marking

AS 4024.1301:2006 机械设备安全．风险评估．风险评估原则

Specifies principles for the procedure of risk assessment by which the knowledge and experience of the harm related to machinery is gathered together to aid in assessing risks during all phases in the life of machinery. Guidance on the information necess

Safety of machinery - Risk assessment - Principles of risk assessment

AS 4024.1201:2006 机械设备安全．一般原则．基本术语和方法论

Specifies the basic terminology and methodology to be used by designers in achieving safety of machinery.

Safety of machinery - General principles - Basic terminology and methodology

AS 4024.1701:2006 机械设备安全．人体测量．技术设计用基本人体测量

Provides information and descriptions of anthropometric measurements as the basis for comparing population groups for ergonomists and others involved in the geometric design of places where people work.

Safety of machinery - Human body measurements - Basic human body measurements for technological design

AS 4024.1703:2006 机械设备安全．与检修孔相关的尺寸测定原则

Specifies minimum dimensions for access openings in machinery. Values for additional space requirements are provided. Applies primarily to non-mobile machinery, as there may be additional specific requirements for mobile machinery.

Safety of machinery - Principles for determining the dimensions required for access openings

AS 4024.1704:2006 机械设备安全．人体测量．人体测量数据

Specifies requirements for human body measurements required for calculating the dimensions of access openings in machinery.

Safety of machinery - Human body measurements - Anthropometric data