13.110;13.180 标准查询与下载
共找到 138 条与 相关的标准，共 10 页
Ergonomics methods. A methodology for work analysis to support design
- ICS
- 13.110;13.180
- CCS
- A25
- 发布
- 2016-03-31
- 实施
- 2016-03-31
This European Standard describes a procedure for analysing human activity in relation to specifying and refining the human component in the design or redesign of machinery and work systems. NOTE 1 The ergonomics methodology described in this European Standard could also be applied to the design or redesign of products and non-work systems. This European Standard is intended to assist project leaders in implementing human and physical resources, methods and schedules as well as in preparing the documents necessary to meeting related requirements. The ergonomics methodology described can be applied to all different stages in design projects from the earliest concept to the final "prototype" or "mock-up", whatever the industrial field or sector. The objective of this European Standard is to achieve a solution that takes into account as many situations as possible which all users - including operators, maintenance staff and installers, may encounter. This will ultimately allow improved usability of the machinery and more robust technical solutions, combined with significantly greater system resilience, user autonomy and accessibility. NOTE 2 Examples of the application of the methodology described in this European Standard are provided in Annex A.
Ergonomics methods - Part 2: A methodology for work analysis to support design
- ICS
- 13.110;13.180
- CCS
- J01
- 发布
- 2016-03
- 实施
Ergonomic design for the safety of machinery. Part 2. Principles for determining the dimensions of access openings
- ICS
- 13.110;13.180
- CCS
- 发布
- 2016
- 实施
- 2017-12-01
Safety of machinery. Human physical performance. Part 5. Risk assessment for epetitive handling at high frequency
- ICS
- 13.110;13.180
- CCS
- A25
- 发布
- 2014
- 实施
- 2016-01-01
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guard
- ICS
- 13.110;13.180
- CCS
- J09
- 发布
- 2014
- 实施
- 2016-01-01
Safety of machinery. Human physical performance. Part 4. Evaluation of working postures and movements in relation to machinery
- ICS
- 13.110;13.180
- CCS
- 发布
- 2013
- 实施
- 2015-01-01
Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery.
- ICS
- 13.110;13.180
- CCS
- A25
- 发布
- 2012-01-01
- 实施
- 2012-01-28
Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery; German version EN 13861:2011
- ICS
- 13.110;13.180
- CCS
- A25
- 发布
- 2012-01
- 实施
Safety of machinery. Ergonomic design principles. Part 2. Interactions between the design of machinery and work tasks
- ICS
- 13.110;13.180
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 1. General principles for human interactions with displays and control actuators
- ICS
- 13.110;13.180
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
This European Standard provides a methodology to achieve a coherent application of various ergonomics standards for the design of machinery. This standard presents a step model calling upon specific standards. To this end, Annex A shows a reference table with relation between hazards as described in EN ISO 12100:2010 and applicable B-standards related to ergonomics.This European Standard can only be used in combination with other relevant ergonomics standards.This European Standard provides guidance where no relevant or suitable ergonomics clauses in C-type standards are available.This European Standard may also be used for incorporating ergonomics in the d
Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
- ICS
- 13.110;13.180
- CCS
- 发布
- 2011-12-17
- 实施
- 2011-12-17
Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
- ICS
- 13.110;13.180
- CCS
- A25
- 发布
- 2011-10-31
- 实施
- 2011-10-31
Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery; German version CEN/TR 614-3:2010
- ICS
- 13.110;13.180
- CCS
- A25
- 发布
- 2011-03
- 实施
This European Standard specifies current requirements for human body measurements (anthropometric data) that are required by EN 547-1 and EN 547-2 for the calculation of access opening dimensions as applied to machinery.The anthropometric data originate from static measurements of nude persons and do not take into account body movements, clothing, equipment, machinery operating conditions or environmental conditions.The data are based on information from anthropometric surveys representative of population groups within Europe comprising at least three million people. Both men and women are taken into account.Measurements are given, as required by EN 547-1 a
Safety of machinery - Human body measurements - Part 3: Anthropometric data
- ICS
- 13.110;13.180
- CCS
- 发布
- 2011-01-14
- 实施
- 2011-01-14
This European Standard specifies the dimensions of openings for whole body access as applied to machinery as defined in EN 292-1. It provides the dimensions to which the values given in EN 547-3 are applicable. Values for additional space requirements are given in annex A. This European Standard has been prepared primarily for non-mobile machinery, there may be additional specific requirements for mobile machinery.Dimensions for passages are based on the values for either the 95th or the 99th percentile of the expected user population. Values for the 99th percentile apply to emergency egress routes.The anthropometric data given in EN 547-3 originate from st
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
- ICS
- 13.110;13.180
- CCS
- 发布
- 2011-01-14
- 实施
- 2011-01-14
This European Standard specifies the dimensions of openings for access as applied to machinery as defined in EN 292-1. It provides the dimensions to which the values given in EN 547-3 are applicable. Values for additional space requirements are given in annex A. This European Standard has been prepared primarily for non-mobile machinery, there may be additional specific requirements for mobile machinery.Dimensions for access openings are based on the values for the 95th percentile, whereas reach distances are based on the values for the 5th percentile, in each case the least favourable body dimension of the expected user population being used as a basis. Th
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
- ICS
- 13.110;13.180
- CCS
- 发布
- 2011-01-14
- 实施
- 2011-01-14
This Technical Report establishes the ergonomic principles to be followed during the design process of mobile machinery with special emphasis on the aspects in which mobile machinery differs from static machinery.The ergonomic design principles given in this Technical Report apply to either or both seated and standing positions.This Technical Report is applicable for the design of mobile (self-propelled and towable) machines in order to ensure ergonomic working conditions for the operator.This Technical Report applies only to driving and operating mobile machinery and not to performing other tasks (e.g. sorters on a potato harvesting machine). Pedestrian-co
Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery
- ICS
- 13.110;13.180
- CCS
- 发布
- 2011-01-08
- 实施
- 2011-01-08
Ergonomic design for the safety of machinery. Part 2. Principles for determining the dimensions of access openings
- ICS
- 13.110;13.180
- CCS
- 发布
- 2011-01-01
- 实施
- 2012-12-01
This DS-handbook for safety of machinery, part 2.3, includes standards, which gives guidance regarding ergonomic design principles, human physical performance and the use of ergonomic standards in connection with design of machinery and the anthropometric requirements for the design of workstations at machinery.
Safety of machinery - Part 2.3: Ergonomic
- ICS
- 13.110;13.180
- CCS
- 发布
- 2010-11-21
- 实施
- 2010-11-21
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators; German version EN 894-4:2010
- ICS
- 13.110;13.180
- CCS
- A25
- 发布
- 2010-11-01
- 实施
- 2010-11-01
