13.220.40;13.310;35.020 标准查询与下载

DIN EN 1047-2:2013 安全存储装置. 耐火试验方法和分类. 第2部分:数据空间和数据容器; 德文版本EN 1047-2-2009+A1-2013

Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container; German version EN 1047-2:2009+A1:2013

NF K20-006-2:2013 安全存储装置.耐火试验分类和方法.第2部分:资料室和数据容纳器

Secure storage units - Classification and methods of test for resistance to fire - Part 2: data rooms and data container

EN 1047-2:2009+A1:2013 安全存储装置.耐火试验方法和分类.第2部分:数据室和数据容器 包含修改件A1,2013

This part of the European Standard EN 1047 specifies requirements for data rooms and data containers. It includes a method of test for the determination of the ability of data rooms and data containers to protect temperature and humidity sensitive data media (see 3.5) and hardware systems (see 3.6) from the effects of fire. A test method for measuring the resistance to mechanical stress (impact test) provided by data rooms type B and data containers is also specified. Requirements are also specified for test specimens, the technical documentation of the test specimens, materials specimens, physical fittings, the correlation of test specimens with the technical documentation and the preparation for type testing as well as test procedures. In addition, a scheme to classify data rooms and data containers from the test results is given (see Table 2). As well as providing protection against fire, correctly installed data rooms and data containers offer protection against impacts caused by failure during fire of components and objects external to the data room or data container. Data rooms and data containers having the same design, protection and construction features (type and thickness of construction and protective materials, rebate geometry, lockings, doors, etc.) will only be given the same protection classification as that of the test specimen if the tolerances are within the ranges specified in Table 1. NOTE This European Standard does not regulate the use of data rooms in the meaning of the building laws of the respective countries. In the construction of data rooms, the respective national requirements should be considered.

Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container

BS EN 1047-2:2009+A1:2013 安全存储装置. 耐火分类和试验方法. 资料库和资料容器

Secure storage units - Classification and methods of test for resistance to fire - Data rooms and data container

NF K20-006-1:2006 安全存储装置.防火试验分类和方法.第1部分:数据室和软盘插件

Secure storage units - Classification and methods of test for resistance to fire - Part 1 : data cabinets and diskette inserts.

BS EN 1047-1:2005 安全存储装置.耐火性能的分类和试验方法.资料柜和磁盘衬套

This part of this European Standard specifies requirements for fire resisting data cabinets and diskette inserts. Two methods of test are specified to determine the ability of fire resisting data cabinets to protect temperature and humidity sensitive contents from the effects of fire: a fire endurance test and a fire shock and impact test. Two levels of fire severity (S 60 and S 120) based upon time of fire exposure; and three protection classes (P, D and DIS) are specified using the maximum temperature increases and humidity values permitted within the storage space of the data cabinet. Diskette inserts (DI 60 P/DIS and DI 120 P/DIS) are installed in data cabinets of protection class S 60 P or S 120 P, respectively, and subjected to a fire endurance test (see 5.1.2). Requirements are also specified for test specimens, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures. A scheme to classify the fire resisting data cabinets and diskette inserts from the test results is also given (see Table 1). Cabinets having the same design, protection and construction features (type and thickness of construction and protective materials, rebate geometry, locking, etc.) will only give the same fire protection classification as that of a test specimen if they are of similar internal dimensions. The maximum difference in internal dimensions (height, width and depth of the storage space, measured from wall to wall) to which the test classification could apply is + 15 %. Cabinets having internal dimensions which differ by more than this amount from that of the tested specimen should be submitted to an extra test. The wall, ceiling and door thicknesses should not be below the specified minimum limit of the type-tested thickness by more than 3 %. Diskette inserts should only be installed in data cabinets having the same design as the series of protection class S 60 P and S 120 P, respectively, in which the insert has been tested in accordance with 5.1.2. Where several inserts are installed, they should be built in one beside the other or one above the other from bottom to top, respectively. The volume and total height of the installed inserts should not exceed 50 % of the total internal volume or 50 % of the internal height, respectively, of the data cabinets into which they are installed. The dimensions of the insert can be adapted by increasing the width and depth to the corresponding dimensions of the data cabinets. A reduction of these dimensions as well as a change of the height is only admitted within the specified tolerance. The temperature increases during type-tests on data cabinets and diskette inserts will be considered in deciding the permitted diskette insert installations. For a permitted installation, the temperature increase of the intended data cabinet (∆Ta K) should not exceed the temperature increase of the tested data cabinet (∆Tb K) in which the diskette insert has been type-tested by more than the difference between the maximum value for the diskette insert (∆Ti K) and the maximum admissible temperature increase (30 K), i.e: ∆Ta - ∆Tb ≤ 30 K - ∆Ti (See example in Annex B). A description of the installation of the diskette inserts should be given in the technical documentation of the manufacturer.

Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and diskette inserts

EN 1047-1:2005 安全存储装置.耐火性能的分类和试验方法.第1部分:资料柜和磁盘衬套

This part of this European Standard specifies requirements for fire resisting data cabinets and diskette inserts.Two methods of test are specified to determine the ability of fire resisting data cabinets to protect temperature and humidity sensitive contents from the effects of fire: a fire endurance test and a fire shock and impact test. Two levels of fire severity (S 60 and S 120) based upon time of fire exposure; and three protection classes (P, D and DIS) are specified using the maximum temperature increases and humidity values permitted within the storage space of the data cabinet.Diskette inserts (DI 60 P/DIS and DI 120 P/DIS) are installed in data ca

Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and diskette inserts

NF K20-006-1:1997 加密存储设备.耐火试验方法和分类.第1部分:数据卡

Secure storage units. Classification and methods of test for resistance to fire. Part 1 : data cabinets.