13.260;29.260.99 标准查询与下载

IEC 61057:2017 带电作业. 安装在底盘上的绝缘天线设备

This document is applicable to insulating aerial devices for mounting on a chassis, to be used for live working on electrical installations at nominal voltages above 1 000V r.m.s. AC in the range 45 Hz to 65 Hz and 1 500V DC. The primary purpose of an aerial device is for work positioning of personnel. Other devices, such as jibs, may be fitted in order to assist the operator in performing the work. This document also includes requirements and tests for the parts of the chassis influencing the performance of the insulating aerial devices to be used for live working. When mounted on a chassis, the insulating aerial device becomes a component of a mobile elevating work platform (MEWP). Complementary requirements for the resulting MEWP are included in ISO 16368. NOTE 1 In Europe, EN 280 instead of ISO 16368 is often used as reference for complementary requirements. The products designed and manufactured according to this document contribute to the safety of users, provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use. NOTE 2 Any requirements that are in conflict with or are meant to be complementary to ISO 16368 are delineated herein. Radial boom (digger) derricks are not covered by this document.

Live working - Insulating aerial devices for mounting on a chassis

KS C IEC 61057:2015 带电作业用带绝缘杆的天线设备

Aerial devices with insulating boom used for live working

KS C IEC 61111:2015 带电作业.绝缘材料纺织物

Live working — Electrical insulating matting

BS EN 61481-2:2014 活着工作 相位比较器 电阻型适用于 1kV 至 36kV ac 电压

Live working. Phase comparators. Resistive type to be used for voltages from 1 kV to 36 kV a.c.

BS EN 61481-1:2014 现场工作 相位比较器 用于交流电压超过1kV的电容式

Live working. Phase comparators. Capacitive type to be used for voltages exceeding 1 kV a.c

LST EN 61111-2009 带电作业 电气绝缘垫（IEC 61111:2009）

Live working - Electrical insulating matting (IEC 61111:2009)

IEC 61111:2009 带电作业.电气绝缘垫

This International Standard is applicable to electrical insulating matting made of elastomer for use as a floor covering for the electrical protection of workers on electrical installations. NOTE 1 For a.c. electrical classification@ as well as d.c. use@ see 4.2. NOTE 2 This document gives a.c. test provisions. There is limited history for use in d.c. applications. NOTE 3 See Annex A for suggested maximum voltage use.

Live working - Electrical insulating matting

SANS 61230:2009 带电操作.用于接地或接地并短路的便携式设备

Applicable to portable equipment, with or without matching connection points, for temporary earthing or earthing and short-circuiting of electrically isolated or de-energized a.c. and d.c. installations, distribution and transmission networks, whether t

Live working - Portable equipment for earthing or earthing and short-circuiting

SANS 1934:2004 带电作业．接地或接地和短路用便携式设备．按照国际要求进行的国家标准修订

Specifies the national limitations on, and additions to, the international standard SANS 61230 for portable earthing equipment for busbars and overhead lines. Applies to equipment for temporary earthing of electrically isolated transmission and distribut

Live working - Portable equipment for earthing or earthing and short-circuiting - National modifications to international requirements

IEC 61111:2002 电器用绝缘材料垫

Applies to insulating matting made of elastomer for use as a floor covering for the electrical protection of workers on a.c. and d.c. installations.

Matting of insulating material for electrical purposes

IEC 61243-2:2002 带电作业.电压探测器.第2部分:1kV-36kV交流电压用电阻类型

Is applicable to portable voltage detectors with or without a built-in power source to be used on electrical systems for voltages of 1 kV to 36 kV a.c., and frequencies from 15 Hz to 60 Hz. This part applies only to resistive voltage detectors used in co

Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.

BS EN 61481:2001 带电作业.1kV至36kV交流电压用便携式相位比较器

This International Standard is applicable to portable phase comparators with or without a builtin power source to be used on electrical systems for voltages from 1 kV to 36 kV a.c. and frequencies from 50 Hz to 60 Hz. This standard is applicable to two-pole phase comparators having a connecting lead between them, two-pole phase comparators operating with a wireless connection and single-pole phase comparators operating with a memory system. This standard is applicable to phase comparators used in contact with the part to be tested, as a single unit or as a separate device completed by an adaptable insulating pole covered in IEC 60855 or IEC 61235. Some restrictions on their use are applicable in the case of factory-assembled switchgear and on overhead systems of electrified railways (see annex B). Devices which can be used as voltage detector and phase comparator are not covered by this standard. NOTE Except when otherwise specified, all the voltages defined in this standard refer to phase-to-phase voltages of three-phase systems. Phase comparators may be used in other than three-phase systems, but the applicable phase-to-phase or phase-to-earth (ground) voltage must be used to determine the operating voltage.

Live working — Portable phase comparators for voltages of 1 kV to 36 kV a.c.