17.040.20;25.220.60 标准查询与下载

DIN EN 13523-1:2017 卷材镀层金属.试验方法.第1部分:膜厚度;德文版本EN 13523-1-2017

Coil coated metals - Test methods - Part 1: Film thickness; German version EN 13523-1:2017

BS EN 13523-1:2017 卷材涂层金属 测试方法 膜厚

Coil coated metals. Test methods. Film thickness

EN 13523-1:2017 卷材涂层金属-试验方法-第1部分:涂膜厚度

This part of the EN 13523 series specifies the procedures for determining the dry-film thickness of an organic coating on a metallic substrate (coil coating). Four appropriate methods are given in this European Standard: a) magnetic induction; b) eddy current; c) micrometer; d) optical. The methods are applicable only to products with smooth and flat substrates but the coating itself may be textured. In that case, for methods a) and b) the average of a series of readings will represent an average of the thickness of the organic coating, while method c) will give the maximum thickness and method d) can provide the minimum, maximum and average thickness. Non-destructive continuous-web methods on measurement of dry-film thickness (see EN ISO 2808) are not dealt with.

Coil coated metals - Test methods - Part 1: Film thickness

BS EN 13523-4:2014 卷材覆层金属.试验方法.铅笔划磨硬度

Coil coated metals. Test methods. Pencil hardness

BS EN 13523-14:2014 卷材覆层金属.试验方法.粉化(Helmen法)

Coil coated metals. Test methods. Chalking (Helmen method)

BS EN 13523-13:2014 卷材覆层金属.试验方法.耐热加速老化性能

Coil coated metals. Test methods. Resistance to accelerated ageing by the use of heat

BS EN 13523-7:2014 卷材覆层金属.试验方法.弯曲开裂耐受性(T弯曲试验)

Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)

BS EN 13523-5:2014 卷材覆层金属.试验方法.快速变形耐受性(冲击试验)

Coil coated metals. Test methods. Resistance to rapid deformation (impact test)

BS EN 13523-1:2010 镀金属线圈 测试要求 漆膜厚度

Coil coated metals. Test methods. Film thickness

BS EN 13523-1:2009 镀金属线圈.测试要求.漆膜厚度

This European Standard specifies the procedures for determining the dry film thickness of an organic coating on a metallic substrate (coil coating). Four appropriate methods are given in this European Standard: a) magnetic induction; b) eddy current; c) micrometer; d) optical. The methods are applicable only to products with smooth and flat substrates but the coating itself may be textured. In that case, for methods a) and b) the average of a series of readings will represent an average of the thickness of the organic coating, while method c) will give the maximum thickness and method d) can provide the minimum, maximum and average thickness. Non-destructive continuous-web methods on measurement of dry-film thickness (see EN ISO 2808) are not dealt with.

Coil coated metals - Test methods - Film thickness

DIN EN 13523-1:2010 卷材镀层金属.试验方法.第1部分:膜厚度.德文版本EN 13523-1-2009

DIN EN 13523-1 specifies the procedures for determining the dry film thickness of an organic coating on a metallic substrate (coil coating). Four appropriate methods are given in this standard: a) Magnetic induction; b) Eddy current; c) Micrometer; d) Optical. The methods are applicable only to products with smooth and flat substrates but the coating itself may be textured. In that case, for methods a) and b) the average of a series of readings will represent an average of the thickness of the organic coating, while method c) will give the maximum thickness and method d) can provide the minimum, maximum and average thickness. Non-destructive continuous-web methods on measurement of dry-film thickness (see EN ISO 2808) are not dealt with.

Coil coated metals - Test methods - Part 1: Film thickness; German version EN 13523-1:2009

NF T37-001-1:2010 卷材覆层金属.试验方法.第1部分:涂膜厚度

Coil coated metals - Test methods - Part 1 : film thickness.

EN 13523-1:2009 卷材镀层金属的试验方法.第1部分:膜厚度

This European Standard specifies the procedures for determining the dry film thickness of an organic coating on a metallic substrate (coil coating). Four appropriate methods are given inThis European Standard: a) magnetic induction; b) eddy current; c) micrometer; d) optical. The methods are applicable only to products with smooth and flat substrates but the coating itself may be textured. In that case, for methods a) and b) the average of a series of readings will represent an average of the thickness of the organic coating, while method c) will give the maximum thickness and method d) can provide the minimum, maximum and average thickness. Non-destructive continuous-web methods on measurement of dry-film thickness (see EN ISO 2808) are not dealt with.

Coil coated metals - Test methods - Part 1: Film thickness

EN 13523-6:2002 卷材覆层金属的试验方法.第6部分:刻压纹之后的粘结(杯形挤压试验)

This part of EN 13523 defines terms of the procedure for determining the adhesion of an organic coating to a metallic substrate after indentation after slow deformation.The resistance to cracking can also be evaluated.

Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)

EN 13523-9:2001 卷材覆层金属的试验方法.第9部分:抗水浸性

This part of EN 13523 describesThe procedure for determiningThe resistance to water immersion of an organic coating on a metallic substrate.

Coil Coated Metals - Test Methods - Part 9: Resistance to Water Immersion

BS EN 13523-1:2001 卷材覆层金属.试验方法.涂层厚度

This Part of EN 13523 specifies the procedures for determining the thickness of an organic coating on a metallic substrate, using electrical measuring devices. Two appropriate methods are given in this Part of EN 13523: a) thickness measurement on magnetic substrate, for example cold rolled steel and metallic coated steel; b) thickness measurement on non-magnetic substrate, for example aluminium and its alloys. The methods are applicable only to products with smooth and flat substrates but the coating itself may be textured. In that case, the average of a series of readings will represent an average of the thickness of the organic coating. The methods are not applicable for coating thicknesses less than 3 μm.

Coil coated metals - Test methods - Coating thickness

EN 13523-5:2001 卷材覆层金属的试验方法.第5部分:抗快速形变力(冲击试验)

This part of EN 13523 specifies procedures for determiningThe resistance to cracking and/or pick-off on rapid deformation of an organic coating on a metallic substrate in terms of energy whichThe specimen will withstand.

Coil Coated Metals - Test Methods - Part 5: Resistance to Rapid Deformation (Impact Test)