17.140.20;53.100 标准查询与下载
共找到 36 条与 相关的标准，共 3 页
本标准规定了在机器定置不动、发动机以额定转速空负荷运转的条件下，土方机械司机位置的时间平均A计权发射声压级的测定方法。 本标准适用于GB/T 8498定义的以及GB/T 25612-2010《土方机械 声功率级的测定 定置试验条件》附录A规定的土方机械。
Earth-moving machinery.Determination of emission sound pressure level at operator's position.Stationary test conditions
- ICS
- 17.140.20;53.100
- CCS
- P97
- 发布
- 2010-12-01
- 实施
- 2011-03-01
本标准规定了在机器动态试验条件的运转状态下，土方机械对环境发射噪声的A计权声功率级的测定方法。 本标准适用于GB/T 8498定义的以及附录A规定的土方机械。
Earth-moving machinery.Determination of sound power level.Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- P97
- 发布
- 2010-12-01
- 实施
- 2011-03-01
本标准规定了在机器动态试验条件的运转状态下，土方机械司机位置的时间平均A计权发射声压级的测定方法。 本标准适用于GB/T 8498定义的以及GB/T 25614-2010《土方机械 声功率级的测定 动态试验条件》附录A规定的土方机械。
Earth-moving machinery.Determination of emission sound pressure level at operator's position.Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- P97
- 发布
- 2010-12-01
- 实施
- 2011-03-01
本标准规定了在机器定置不动、发动机以额定转速空负荷运转的条件下，土方机械对环境发射噪声A计权声功率级的测定方法。 本标准适用于GB/T 8498定义的以及附录A规定的土方机械。
Earth-moving machinery.Determination of sound power level.Stationary test conditions
- ICS
- 17.140.20;53.100
- CCS
- P97
- 发布
- 2010-12-01
- 实施
- 2011-03-01
This international Standard describes a method for determining the emission sound pressure level of earthmovingmachinery measured at the operator’s position in terms of the time-averaged A-weighted sound pressurelevel while the machine is stationary with
Earth-moving machinery - Determination of emission sound pressure level at operator's position - Stationary test conditions
- ICS
- 17.140.20;53.100
- CCS
- 发布
- 2013-08-02
- 实施
- 2013-08-02
This International Standard describes a method for determining the emission sound pressure level of earthmovingmachinery at the operator’s position in terms of the time averaged A-weighted sound pressure levelwhile the machine is operating under dynamic t
Earth-moving machinery - Determination of emission sound pressure level at operator's position - Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- 发布
- 2013-08-02
- 实施
- 2013-08-02
This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Standard is used to determine the exterior A-weighted equivalent sound power level of static and in-place dynamic machines (dozer, loader, excavator, and backhoe) similar to the sound power obtained in ISO 6393 static and ISO 6395 dynamic sound power test procedures. Additional machine types, specifically sweepers and scrubbers, covered by SAE J2130 have been added, and other work machine types covered by SAE J111
Sound Power Level Measurements of Work Machines Static and In-Place Dynamic Methods
- ICS
- 17.140.20;53.100
- CCS
- Z32
- 发布
- 2013-06-20
- 实施
- 2013-09-13
This Standard specifies a method for determining the noise emitted to the environment by earth-moving machinery, measured in terms of the A-weighted sound power level while the machine is stationary and with the engine operating at the rated speed under no-load conditions.
Machinery - Determination of sound power level - static test conditions
- ICS
- 17.140.20;53.100
- CCS
- 发布
- 2011-12-20
- 实施
- 2012-01-20
This Standard specifies a method for determining the emission sound pressure level of earth-moving machinery at the operator-s position, measured in terms of the time-averaged A-weighted emission sound pressure level while the machine is operating under dynamic test conditions.
Machinery - Determination of the level of emission sound pressure at operator position - Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- 发布
- 2011-12-20
- 实施
- 2012-01-20
Earth-moving machinery -- Determination of sound power level -- Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- P97;Z32
- 发布
- 2010-10-20
- 实施
Earth-moving machinery -- Determination of emission sound pressure level at operator's position -- Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- P97;Z32
- 发布
- 2010-10-20
- 实施
Earth-moving machinery - Determination of emission sound pressure level at operator's position - Dynamic test conditions; Technical Corrigendum 1
- ICS
- 17.140.20;53.100
- CCS
- P97
- 发布
- 2009-05
- 实施
Earth-moving machinery. Determination of sound power level. Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Earth-moving machinery - Determination of the emission sound pressure level at the operator's position - Stationary test conditions
- ICS
- 17.140.20;53.100
- CCS
- Z32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Earth-moving machinery. Determination of emission sound pressure level at operator's position. Stationary test conditions
- ICS
- 17.140.20;53.100
- CCS
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Earth-moving machinery - Determination of sound power level - Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- Z32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Earth-moving machinery - Determination of emission sound pressure level at operator's position - Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- Z32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Earth-moving machinery - Determination of sound power level noise emissions - Stationary test conditions
- ICS
- 17.140.20;53.100
- CCS
- Z32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Earth-moving machinery. Determination of sound power level noise emissions. Stationary test conditions
- ICS
- 17.140.20;53.100
- CCS
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Earth-moving machinery. Determination of emission sound pressure level at operator's position. Dynamic test conditions
- ICS
- 17.140.20;53.100
- CCS
- 发布
- 2009-03-31
- 实施
- 2009-03-31
