17.140.20;79.120.10 标准查询与下载

NF E64-201*NF ISO 7960:1996 机床发出的空气噪声.木工机床的操作条件

Airborne noise emitted by machine-tools. Operating conditions for woodworking machines.

BS 7140:1995 木工机床发出的空气噪声 木工机械的操作条件

This International Standard, together with basic noise emission International Standards, describes the mechanical and acoustical specifications necessary for a reproducible test method for the determination of airborne noise emitted by woodworking machines. NOTE 1 Acoustic measurement procedures and noise data reporting are given in the basic acoustic standards selected from the ISO 3740 series, ISO 4871 and the ISO 11200 series (see annex V). This International Standard specifies operating condi-tions and microphone positions for the measurement of noise emitted by woodworking machines. It applies to: —single-blade circular saw benches (annex A); —planing machines (annex B); —thickness planing machines (annex C); —single-spindle moulding machines (annex D); —double-end profiling machines (annex E); —edge banding machines (annex F); —double-end sizing and edge banding machines (annex G); —two-side and multi-side planing machines and moulding machines (annex H); —bandsawing machines (annex J); —single-end tenoning machines (annex K); —routing machines (annex L); —double-end trim circular machines (nonstroke) (annex M); —single-blade stroke circular sawing machines for cross cutting (annex N); —vertical and horizontal panel sizing sawing ma-chines (annex P); —multiblade circular sawing machines (for ripping) (annex Q); —sanding machines (annex R); —double-edging circular sawing machines (for rough cutting) (annex S); —double-blade stroke circular sawing machines for cross cutting (annex T); —double-end tenoning machines (for tenoning only (annex U). The existence of special-purpose machines, for which such standard operating conditions cannot be speci-fied, is acknowledged. This International Standard applies to the types of woodworking machines listed above. Additional types will be covered in future editions of this International Standard (ISO 7960).

Airborne noise emitted by woodworking machine tools. Operating conditions for woodworking machines

ISO 7960:1995 机床噪声 木工机床的工作条件

Describes, together with basic noise emission International Standards, the mechanical and acoustical specifications necessary for a reproducible test method for the airborne noise emitted by woodworking machines. Specifies standard operating conditions and microphone positions for the measurement on 19 types of woodworking machines. The existence of special-purpose machines, for which such standard operating conditions cannot be specified, is acknowledged. Additional types will be covered in future editions.

Airborne noise emitted by machine tools - Operating conditions for woodworking machines

DIN 45635-1651:1990 机器空气噪声的测量.包络面法.木工机床.台式单锯片圆盘锯的特殊规定

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; single blade circular saw benches

NF E65-201:1988 木材和同类材料用半固定式修边机.机械引起事故的预防

Semi-fixed triming machines for wood and similar materials. Prevention of accidents of mechanical origin.

DIN 45635-1666:1988 机器空气噪声的测量.包络面法.木工机床.粗切割用双刃圆锯床

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double edging circular sawing machines for rough cutting

DIN 45635-1667:1988 机器空气噪声的测量.包络面法.木工机床.锯片双向行程横向锯切环形锯床

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double blade stroke circular sawing machines for cross cutting

DIN 45635-1665:1988 机器空气噪声的测量.包络面法.木工机床.双头开榫机

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double end tenoning machines

DIN 45635-1664:1987 机器排放的空气传播噪声的测量.第1664部分:包洛面法.木材加工机床.多锯条圆形锯床

Measurement of airborne noise emitted by maschines; enveloping surface method; woodworking machines; multi-blade circular sawing machines

DIN 45635-1663:1987 机器排放的空气传播噪声的测量.第1663部分:包洛面法.木材加工机床打磨机

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines sanding machines

DIN 45635-1658:1986 机器排放的空气传播噪声的测量.第1658部分:包洛面法.横切单冲程圆锯木材加工机床

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; single blade stroke circular sawing machines for cross-cutting

DIN 45635-1661:1986 机器排放的空气传播噪声的测量.第1661部分:包洛面法.台式带锯木材加工机床

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; table band sawing machines

DIN 45635-1660:1986 机器排放的空气传播噪声的测量.第1660部分:包洛面法.造模铣切机木材加工机床

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; routing machines

DIN 45635-1659:1986 机器排放的空气传播噪声的测量.第1659部分:包洛面法.板材成形机木材加工机床

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; panel sizing machines

DIN 45635-1662:1986 机器排放的空气传播噪声的测量.第1662部分:包洛面法.多轴单端开榫机木材加工机床

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; single-end tenoning machines with several spindles

DIN 45635-1657:1983 机器空气噪声的测量.包络面法.木工机床.双定尺圆锯床的特殊规定

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machmes; double dimensions circular sawing machinesDiese Norm legt Erg?nzungen zu DIN 45 635 Teil 16 fest, die bei der Ger?uschmessung von Doppelabkürzkreiss?ge-mas

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double dimensions circular sawing machines

DIN 45635-1655:1982 机器空气噪声的测量.空气噪声测量.包络面法.木工机床.最终修整机、边角加工机和镶边机的特殊规定

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double-end trimming, glueing and banding machinesDiese Norm legt Erg?nzungen zu DIN 45 635 Teil 16 fest, die bei der Ger?uschmessung von Formatbearbeitung

Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for final trimming machines and edge lipping and banding machines

DIN 45635-1654:1982 机器空气噪声的测量.空气噪声测量.包面法.木工机床.多工部边条机和线脚机的特殊规定

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; edge glueing, banding and trimming machinesDiese Norm legt Erg?nzungen zu DIN 45 635 Teil 16 fest, die bei der Ger?uschmessung von mehrstufigen Kantenver-

Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for multistage edge lipping and banding machines

DIN 45635-1656:1982 机器空气噪声的测量.空气噪声测量.包络面法.木工机床.双面及多面刨铣床的特殊规定

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; two-side and multi-side planing and moulding machinesDiese Norm legt Erg?nzungen zu DIN 45 635 Teil 16 fest,die bei der Ger?uschmessung von Hobel-und Fr?s

Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for two-side and multi-side planing and milling machine

DIN 45635-1653:1982 机器空气噪声的测量.空气噪声测量.包络面法.木工机床.双头刨床的特殊规定

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double-end profiling machinesDiese Norm legt Erg?nzungen zu DIN 45 635 Teil 16 fest, die bei der Ger?uschmessung von Doppelendprofilern für Holz besonders

Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for double end shaping machines