17.140.20;91.140.60 标准查询与下载

JIS A 1424-1:2015 给水装置中装置和设备噪声的实验室试验方法.第1部分:测量方法

Method for laboratory tests on noise emission from appliances and equipments used in water supply installations

GOST R 56771-2015 声学. 建筑物内供水设施噪声测量的实验室方法

Acoustics. Laboratory method of noise measurement from water supply installations inside buildings

KS F ISO 3822-2:2014 供水设施用器具和设备噪声排放的实验室试验 第2部分：排水龙头和混合阀的安装和操作条件

이 표준은 물 흐름 때문에 발생하는 소음을 측정할 때 사용되는 단독 수전과 온냉수 혼합 수전의 설치 방법 및 작동 조건을 규정한다.설명된 절차는 일반적 설계에 따라 0.1∼0.5 MPa의 흐름 압력을 가진 단독 수전과 온냉수 혼합 수전의 모든 형태에서 일반적으로 사용하는 것이다.취급 방법 및 작동 조건은 유니언, 엘보 및 어댑터 등의 설치를 포함한 단독 수전과 온냉수 혼합 수 전 부품에 적용한다. 그러나 포말기, 샤워 호스, 샤워 헤드 및 정류기 등의 교환 가능한 급수기구는 제외한다. 이 배수 부품은 표준 저소음 흐름 저항으로 대체한다.앞서 언급된 배수 부품이 교체가 어렵거나 제거할 수 없을 때는 그대로 포함하여 실험을 실시한다. 교환 가능한 배수 부품은 KS F ISO 3822의 다른 부에 정의된 절차에 따라 별도로 시험한다.하나 이상의 독립된 단독 수전으로 사용하도록 고안된 자동 온도 조절식 온냉수 혼합 수전, 비데 내부로 직접 배출하는 비데 밸브는 일반적인 단독 수전이나 온냉수 혼합 수전으로 생각되지 않아 이 표준에 포함하지 않는다.이 시험 절차의 범위는 0.1∼0.5 MPa의 흐름 압력을 갖는다.?

Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps and mixing valves

KS F ISO 3822-1:2014 供水设施用器具和设备噪声排放的实验室试验 第1部分：测量方法

이 표준은 급수기구 내부를 지나는 물의 흐름으로 인해 발생하는 방사음을 시험실에서 측정하는 방법에 대하여 규정한 것이다.대상으로 하는 기구는 단독 수전, 관로 내에 부착된 감압 장치 및 급탕 기구와 같은 직렬 밸브와 특수 기구이며, 이들 모두를 이후부터는 “급수기구”라 한다.규정된 방법을 이용함으로써 서로 다른 시험실에서 측정한 결과를 비교할 수 있다.?

Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement

DIN EN ISO 3822-3:2010 声学.供水设施的装置和设备发射的噪声的实验室测试.第3部分:管线阀门和管件的安装和工作条件(ISO 3822-3-1997+Amd 1-2009).德文版本EN ISO 3822-3-1997+A1-2009

This part of EN ISO 3822 specifies the mounting and operating conditions to be used for in-line valves and appliances which control the flow, pressure or temperature of the water in water supply installations, when measuring noise emission resulting from water flow.

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997 + Amd 1:2009); German version EN ISO 3822-3:1997

DS/EN ISO 3822-3/A1:2010 声学 供水装置中使用的器具和设备噪声排放的实验室测试 第3部分：直列式阀门和器具的安装和操作条件

This part of EN ISO 3822 specifies the mounting and operating conditions to be used for on-line valves and appliances which control the flow, pressure or temperature of the water in water supply installations, when measuring noise emission resulting from water flow. It is applicable to in-line valves and appliances of maximum nominal size DN 32 and to systems in which the maximum water flow rate does not exceed 2 l/s. The procedures described are for general use for all types of in-line valves of conventional design.

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances

NF S31-014-3/A1:2010 声学.供水设施用装置和设备发射噪声的实验室试验.第3部分:管路阀门和器件的安装和工作条作

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3 : mounting and operating conditions for in-line valves and appliances.

ISO 3822-3:1997/Amd 1:2009 声学.供水设施用装置和设备发射噪声的实验室试验.第3部分:管路阀门和器件的安装和工作条作.修改件1

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances; Amendment 1

DIN EN ISO 3822-1:2009 声学.由供水设施和设备发出噪音的实验室试验.第1部分:测量方法(ISO3822-1:1999 + AMD1:2008)(包括修改件1:2009),通过DIN EN ISO 3822-1:2009-07英文版本

This part of EN ISO 3822 specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations. The items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers and water-heating appliances, all of which are hereafter referred to as "appliances". The method specified makes it possible to obtain comparable results of measurements in different laboratories.

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999 + Amd 1:2008)(includes Amendment A1:2009); English version of DIN EN ISO 3822-1:2009-07

DS/EN ISO 3822-1/A1:2009 声学 供水装置中使用的器具和设备噪声排放的实验室测试 第1部分：测量方法 修正案 1：测量不确定度

This standard specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations.

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty

ISO 3822-1:1999/Amd 1:2008 声学.供水设施的装置和设备发射噪音的实验室试验.第1部分:测量方法.修改件1:不确定性测量

Amendment 1 to ISO 3822-1:1999 was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement; Amendment 1: Measurement uncertainty

JIS A 1424-1 AMD 1:2008 供水设施用装置和设备发出噪声的实验室试验方法(修改件1)

Method for laboratory tests on noise emission from appliances and equipments used in Water Supply Installations (Amendment 1)

JIS A 1424-2 AMD 1:2008 供水设施用装置和设备发出的噪声的实验室试验方法.第2部分:排水龙头和混合阀门的安装和操作条件(修改件1)

Method for laboratory tests on noise emission from appliances and equipments used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves (Amendment 1)

DS/EN ISO 3822-1:1999 声学 供水装置中使用的器具和设备噪声排放的实验室测试 第1部分：测量方法

This standard specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations.

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement

BS EN ISO 3822-1:1999+A1:2008 声学,对供水设施使用的仪器和设备排放噪音进行的实验室试验.测量方法

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Method of measurement

NF S31-014-1*NF EN ISO 3822-1:1999 声学.供水装置和设备噪音的实验室测试.第1部分:测量方法

Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 1 : method of measurements.

EN ISO 3822-1:1999 声学.用于供水设施的装置和设备发出的噪音的实验室试验.第1部分测量方法.包含修改件A1-2008

Acoustics ?Laboratory tests on noise emission from appliances and equipment used in water supply installations ?Part 1: Method of measurement Incorporates Amendment A1: 2008

ISO 3822-1:1999 声学 供水设施的装置和设备发射的噪声的实验室测试 第1部分:测量方法

This part of EN ISO 3822 specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations. The items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers and water-heating appliances, all of which are hereafter referred to as "appliances". The method specified makes it possible to obtain comparable results of measurements in different laboratories.

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement

JIS A 1424-1:1998 给水装置中装置和设备噪声的实验室试验方法.第1部分:测量方法

この規格は，給水設備に使われる給水器具内を流れる水流によって，発生した放射音を実験室において測定する方法について規定する。 対象とされる器具は，給水栓，管路内に取り付ける弁及び給湯器具?装置を含んでおり，これらすべてを以下“給水器具開という。

Method for laboratory tests on noise emission from appliances and equipments used in Water Supply Installations

JIS A 1424-2:1998 给水装置中装置和设备噪声的实验室试验方法.第2部分:排水阀和混合阀的安装和操作条件

この規格は，JIS A 1421-1で規定する給水器具発生音の実験室測定方法における試験装置及び試験方法によって，給水器共発生音を測定するときの給水栓及び混合水栓の取付方法並びに作動条件について規定する。 対象とする給水栓及び混合水栓は，建築物（流し，洗面槽，浴槽など)又は建築物近傍(例えば，庭園用)における冷水及び温水の使用のために0.1~0.5 MPaの範囲の給水圧で設計されたものとする。自動温度調整混合水栓，ビデの内部への直接の出口をもったビデ弁は対象から除外する。また，電気作動弁は組合せ装置(ソレノイド弁及び吐水口)であり，これも対象から除外する。供試給水器具としては，給水栓又は混合水栓の接続部及び吐水口における取付継手，曲がり，取付金具などは含むが，泡沫器，シャワーホース，シャワーへッド，整流器などのような交換可能な附属品ま取り外し，その代替として探準低騒き流れ抵抗を取り付ける。 なお.附属品が交換又は着脱できない形式のものであれば，そのままの状態で測定を実施する。

Method for laboratory tests on noise emission from appliances and equipments used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves