19.080;71.040.10 标准查询与下载

GB 4793.1-2007 测量、控制和实验室用电气设备的安全要求 第1部分：通用要求

1.1．1 本部分适用的设备 GB 4793的本部分规定了预定作专业用、工业过程用以及教育用的电气设备的通用安全要求，当在 1．4的环境条件下使用时，这些符合下列a)～d)定义的任何一种设备可以配备计算装置： a) 电气试验和测量设备 是指用电气方法试验、测量、指示或记录一个或多个电量或非电量的设备，也包括非测量设备，如信号发生器、测量标准器、电源、换能器和发射机等。 注：除了设计成仅嵌装在其他设备上的面板仪表外．所有指示和记录用的电气测量仪器(1．1．2的那些设备除外)均在GB 4793的范围内。嵌装式面板仪表被认为是元件，仅需要满足GB 4793的相关要求，或者作为嵌装这些仪表的设备的一个部件满足其他标准。 b) 电气控制设备 是指将一个或多个输出量控制在特定量值的设备，而且每一个量值由手动设置、本地或远地编程，或者由一个或多个输入变量来确定的。 c) 电气实验室设备 是指测量、指示、监视或分析物质的设备，或者用于制备材料的设备，包括体外诊断(IVD)设备。 这种设备也可用于实验室以外的地方，例如自我检查用的IVD设备就可以在家庭中使用。 d) 预定要与上述设备一起使用的附件(例如样品处理设备)。 1．1．2不包括在本部分范围内的设备 不适用于包括在下列标准范围内的设备： a) GB 8898(音频、视频及类似电子设备安全要求)； b) GB 4706(家用和类似用途电器的’安全)； c) GB 4943(信息技术设备的安全，但1．1．3规定的设备除外)； d)GB 9706(医用电气设备)； e) GB/T 15283(0．5、1和2级交流有功电度表)； f) GB l9212(电力变压器、电源装置和类似产品的安全)； g)IEC 60204(电气机械控制装置)； h)IEC 60364(建筑物电气装置)； i)IEC 60439-1(低压开关装置和控制装置)。 1．1．3 计算设备 本部分仅适用于组成本部分范围内的设备的一部分或设计成仅与设备一起使用的计算机、处理器等。 注：在GB 4943范围内的并符合其要求的汁算装置和类似设备被认为适合与本部分范围内的设备一起使用。但是，GB 4943对防潮和防液体的某些要求没有本部分严格。如果潮湿和液体引起的危险可能会影响符合 GB 4943的设备，而且该符合GB 4943的设备如果又与符合本部分的设备一起使用，则使用说明要规定出所需要的任何附加的预防措施。

Safety requirements for electrical equipment for measurement,control,and laboratory use.Part 1:General requirements

NF C42-020-2-040*NF EN 61010-2-040:2015 测量、控制和实验室用电气设备的安全要求.第2-040部分:处理医疗材料用灭菌器和清洗消毒器的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040 : particular requirements for sterilizers and washer-disinfectors used to treat medical materials

KS C IEC 61010-2-040:2015 测量、控制和实验室用电气设备的安全要求.第2-040部分:处理医疗材料用灭菌器和清洗消毒器的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

BS EN 61010-2-081:2015 测量、控制和实验室用电气设备的安全性要求.分析和其他目的用自动和半自动实验室设备的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

JIS C 1010-2-33:2015 测量, 控制和实验室使用电气设备的安全要求. 第2-33部分: 家用和专业用于测量电源电压的手持式万用表和其他手持式表的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-33: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage

KS C IEC 61010-1:2014 测量、控制和实验室用电气设备的安全要求 第1部分：通用要求

Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements

KS C IEC 61010-2-20:2014 测量、控制和试验室用电气设备的安全要求 第2-20部分：实验室离心机特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges

IEC 61010-2-033:2012 测量,控制和实验室使用的电气设备安全性要求.第2-033部分:家用和专业用途,能够测量电源电压的手持式万用表和其他手持式计量仪器的详细要求

Scope and object This clause of Part 1 is applicable except as follows: Equipment included in scope Replacement: Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for METERS. The METERS that have a primary purpose of measuring voltage on a live MAINS CIRCUIT are within the scope of this standard. They have various names@ but all of them have capability for measurements of voltages on a live MAINS CIRCUIT. Some of the names given to this equipment are as follows: ?C MULTIMETER; ?C digital MULTIMETER; ?C VOLTMETER; ?C clamp METER (see also Part 2-032). For the purpose of this standard@ the term METER is used for these HAND-HELD measuring instruments. NOTE Parts of the equipment that are not within the scope of this Part 2-033 are considered to be covered by the requirements of Part 1 or other part 2's of IEC 61010 and then will also need to meet the requirements of these other parts. Equipment excluded from scope Addition: Add the following new item to the list: aa) IEC 61557 (Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ?C Equipment for testing@ measuring or monitoring of protective measures ?C Parts 1 through 12). Addition: Add the two following paragraphs at the end of the subclause: Equipment that is not capable of measuring MAINS voltages is not within the scope of this Part 2-033. See IEC 61010-2-030 for requirements pertaining to such equipment. Such equipment@ including other HAND-HELD equipment such as oscilloscopes@ wattmeters@ process control MULTIMETERS@ and communications test sets is not within the scope of this Part 2-033. Aspects included in scope Addition: Add the following paragraph at the end of the subclause: Requirements for protection against HAZARDS resulting from NORMAL USE and REASONABLY FORESEEABLE MISUSE of measuring circuits are given in Clause 101.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other hand-held meters, for domestic and professional use, capable of measuring mains voltage

BS EN 61010-2-030:2010 测量,控制和实验室用电气设备的安全性要求.线路测量和测试的详细要求

This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replace the text with the following: This part of IEC 61010 specifies safety requirements for testing and measuring circuits which are connected for test or measurement purposes to devices or circuits outside the measurement equipment itself. These include measurement circuits which are part of electrical test and measurement equipment, laboratory equipment, or process control equipment. The existence of these circuits in equipment requires additional protective means between the circuit and an OPERATOR.

Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for testing and measuring circuits

DD 61010-100-2007 测量、控制和实验室用电气设备安全要求.教育机构中儿童和青年人使用设备的特殊要求

1.1.1 Equipment included in scope Addition: At the end of the subclause, add the following new paragraph and two notes: This Part applies to any of the above equipment that is RATED for use by persons under the age of 18 years in educational establishments and under the supervision of a competent person. The equipment might not necessarily be used in a formal laboratory. NOTE 1 In this context, laboratory equipment does not include equipment for forming or machining resistant materials. NOTE 2 If all or part of the equipment falls within the scope of one or more Part 2 standards of BS EN 61010 as well as within the scope of this Draft for Development, it will also need to meet the requirements of those Part 2 standards. 1.2.1 Aspects included in scope Addition: Add the following new note, and renumber the existing note as note 1: NOTE 2 Attention is also drawn to the existence of additional requirements that can be specified by national authorities responsible for the health and safety of persons in education with special needs.

Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for equipment rated for use by children and young people in educational establishments

BS DD 61010-100:2007 测量、控制和实验室用电气设备安全要求.教育机构中儿童和青年人使用设备的特殊要求

1.1.1 Equipment included in scope Addition: At the end of the subclause, add the following new paragraph and two notes: This Part applies to any of the above equipment that is RATED for use by persons under the age of 18 years in educational establishments and under the supervision of a competent person. The equipment might not necessarily be used in a formal laboratory. NOTE 1 In this context, laboratory equipment does not include equipment for forming or machining resistant materials. NOTE 2 If all or part of the equipment falls within the scope of one or more Part 2 standards of BS EN 61010 as well as within the scope of this Draft for Development, it will also need to meet the requirements of those Part 2 standards. 1.2.1 Aspects included in scope Addition: Add the following new note, and renumber the existing note as note 1: NOTE 2 Attention is also drawn to the existence of additional requirements that can be specified by national authorities responsible for the health and safety of persons in education with special needs.

Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for equipment rated for use by children and young people in educational establishments

BS IEC 61010-3-061:1999 测量、控制和实验室用电气设备的安全要求.IEC 61010-2-061的合格鉴定报告.带有热雾化和电离的实验室原子分光仪的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 3-061: Conformity verification report for IEC 61010-2-061, Particular requirements for laboratory atomic spectrometers with thermal atomization and ionzation FOREWORD Conformity verification report IEC 61010-2-61 Clause 5 Marking and documentation 6 Protection against electric shock 7 Protection against mechanical hazards 8 Mechanical resistance to shock, vibration and impact (AM 1 only) Mechanical resistance to shock and impact (AM 2) 9 Equipment temperature limits and protection against the spread of fire 10 Resistance to heat 11 Resistance to moisture and liquids (AM 1 only) Protection against hazards from fluids (AM 2) 12 Protection against radiation, including laser sources, and against sonic and ultrasonic pressure 13 Protection against liberated gases, explosion and implosion 14 Components 15 Protection by interlocks 16 Measuring circuits Annex K Routine tests Tables 1 Documents attached to this report 2 Test equipment list, 3 List of components relied on for safety Form A.1 to Form A.29

Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-061, particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

BS IEC 61010-3-051:1999 测量、控制和实验室用电气设备的安全要求.IEC 61010-2-051的合格鉴定报告.混合和搅拌用实验室设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 3-051: Conformity verification report for IEC 61010-2-051, Particular requirements for laboratory equipment for mixing and stirring FOREWORD Conformity verification report for IEC 61010-2-051 Clause 5 Marking and documentation 6 Protection against electric shock 7 Protection against mechanical hazards 8 Mechanical resistance to shock, vibration and impact (AM1 only) Mechanical resistance to shock and impact (AM 2) 9 Equipment temperature limits and protection against the spread of fire 10 Resistance to heat 11 Resistance to moisture and liquids (AM1 only) Protection against hazards from fluids (AM 2) 12 Protection against radiation, including laser sources, and against sonic and ultrasonic pressure 13 Protection against liberated gases, explosion and implosion 14 Components 15 Protection by interlocks 16 Measuring circuits Annex K Routine tests Tables 1 Documents attached to this report 2 Test equipment list 3 List of components relied on for safety Form A.1 to Form A.29

Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring

IEC TR3 61010-3-061:1999 测量、控制和实验室用电气设备的安全要求.第3-061部分:带雾化和电离作用的实验室原子分光计的特殊要求,IEC 61010-2-061标准规定的合格鉴定报告

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-061: Conformity verification report for IEC 61010-2-061, Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization Marking and documentation Protection against electric shock Protection against mechanical hazards Mechanical resistance to shock, vibration and impact (AM 1 only) Mechanical resistance to shock and impact (AM 2) Equipment temperature limits and protection against the spread of fire Resistance to heat Resistance to moisture and liquids (AM 1 only) Protection against hazards from fluids (AM 2) Protection against radiation, including laser sources, and against sonic and ultrasonic pressure. Protection against liberated gases, explosion and implosion Components Protection by interlocks Measuring circuits Documents attached to this report Test equipment list List of components relied on for safety

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-061: Conformity verification report for IEC 61010-2-061, particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

IEC TR3 61010-3-051:1999 测量、控制和实验室用电气设备的安全要求.第3-051部分:混合及搅拌用实验室设备的特殊要求,IEC 61010-2-051标准规定的合格鉴定报告

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring