共找到 2142 条与 无损检测 相关的标准,共 143 页
Non-destructive testing X- and gamma-ray inspection of pipe corrosion and deposits Part 2: Double-wall radiographic inspection
Non-destructive testing X- and gamma-ray testing of pipeline corrosion and deposits Part 1: Tangential ray testing
Non-destructive testing digital radiography image processing and communication
Nondestructive testing phased array ultrasonic cylindrical imaging guided wave testing
Non-destructive testing process tower gamma ray scanning method
Nondestructive Testing Nondestructive Testing Training Outline
Non-destructive testing acoustic emission testing method for damage assessment of reinforced concrete beams
Non-destructive testing acoustic emission detection method for classification of active cracks in concrete structures
Nondestructive Testing Acoustic Emission Testing Method for Concrete Acoustic Emission Signals
Ultrasonic testing and evaluation method for non-destructive testing of in-service steam turbine blades
Acoustic Emission Testing Method and Evaluation Criteria for Nondestructive Testing of Fiber Reinforced Polymers
Nondestructive Testing Terminology Part 13: Array Ultrasonic Testing
Neutron Diffraction Method for Nondestructive Testing Residual Stress Measurement
Nondestructive Testing Terminology Part 10: Magnetic Memory Testing
本文件规定了工业内窥镜(以下简称内窥镜)目视检测发现的各类缺欠的图谱特征。 本文件适用于采用内窥镜参考图谱,评价工业产品的金属或非金属零部件的内部结构、内表面形貌特征,以及间接目视的表面缺欠等。 注:本文件给出的图谱,作为缺欠影像的评价参考,通过采用实例照片与参考图谱的对比方法,分析评定缺欠的形貌。
Non-destructive testing—Industrial endoscopy visual testing—Part 2: Atlas
本文件规定了工业内窥镜(以下简称内窥镜)目视检测的方法原理、环境要求、人员要求、检测系统、检测、结果评价和检测报告。 本文件适用于工业产品的金属或非金属零部件和总成构件的内表面状态与内部结构的检测与评价。
Non-destructive testing—Industrial endoscopy visual testing—Part 1:Method
本文件规定了对以钢为基材通过焊接、轧制和爆炸方式复合形成的覆层采用单晶或双晶探头手工超声检测的技术。 本文件适用于检测覆层及界面的平面型不连续或体积型不连续。 本文件不规定验收条款,也不界定检测范围。
Non-destructive testing—Ultrasonic testing—Technique of testing claddings produced by welding, rolling and explosion
本文件规定了1 MV以下X射线无损检测设备防护的剂量限值、控制区和监督区、X射线设备使用要求和标识。 本文件适用于1 MV以下X射线无损检测设备的安全防护。
Non-destructive testing instruments—Radiation protection rules for the technical application of X-ray equipment up to 1 MV—Part 1:General safety technical requirements
本文件描述了450kV以下X射线无损检测设备生产、调试和运行过程中所涉及的辐射防护主要参数的计算公式和图表,以及固定工作设备保护层的计算方法。 本文件适用于450kV以下X射线无损检测设备生产、调试和运行过程中的安全防护,也适用于基于阳极靶为钨的X射线设备的安全防护。
Non-destructive testing instruments—Radiation protection rules for the technical application of X-ray equipment up to 1 MV—Part 3:Formulas and diagrams for the calculation of radiation protection for
本文件规定了工业X射线数字成像系统的原理、技术要求、试验方法及标志。 本文件适用于工业X射线数字成像系统(以下简称系统)的生产、使用及调试。
Non-destructive testing instruments—Industrial digital X-ray imaging system
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号