23.040.10;77.040.20 标准查询与下载

GOST R ISO 10893-11-2016 无缝和焊接钢管. 第11部分. 用于检测纵向和/或横向缺陷的焊缝自动超声波试验

Seamless and welded steel tubes. Part 11. Automated ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections

GOST R ISO 10893-7-2016 无缝和焊接钢管. 第7部分. 焊缝缺陷检测用数字放射线试验

Seamless and welded steel tubes. Part 7. Digital radiographic testing of the weld seam for the detection of imperfections

GOST R ISO 10893-3-2016 无缝和焊接钢管. 第3部分. 铁磁性管纵向和/或横向缺陷检测用自动化全周边漏磁试验

Seamless and welded steel tubes. Part 3. Automated full peripheral flux leakage testing of ferromagnetic tubes for the detection of longitudinal and/or transverse imperfections

GOST R ISO 10893-6-2016 无缝和焊接钢管. 第6部分. 焊缝缺陷检测用放射线试验

Seamless and welded steel tubes. Part 6. Radiographic testing for the detection of imperfections of the weld seam

GOST R ISO 10893-9-2016 无缝和焊接钢管. 第9部分. 用于检测焊接钢管制造用带材/板材缺陷的自动超声波试验

Seamless and welded steel tubes. Part 9. Automated ultrasonic testing for the detection of imperfections in strip/plate used for the manufacture of welded steel tubes

GOST R ISO 10893-5-2016 无缝和焊接钢管. 第5部分. 用于检测表面缺陷的铁磁性管磁粉探伤

Seamless and welded steel tubes. Part 5. Magnetic particle inspection of ferromagnetic tubes for the detection of surface imperfections

GOST R ISO 10893-8-2014 无缝和焊接钢管. 第8部分. 缺陷检测用自动超声波试验

Seamless and welded steel tubes. Part 8. Automated ultrasonic testing for the detection of imperfections

GOST R ISO 10893-4-2014 无缝和焊接钢管. 表面缺陷检测用液体渗透检查

Seamless and welded steel tubes. Part 4. Liquid penetrant inspection for the detection of surface imperfections

GOST R ISO 10893-12-2014 无缝和焊接钢管. 第12部分. 自动化全周边超声波厚度试验

Seamless and welded steel tubes. Part 12. Automated full peripheral ultrasonic thickness testing

GOST R ISO 10893-10-2014 无缝和焊接钢管. 第10部分. 纵向和/或横向缺陷检测用自动化全周边超声波试验

Seamless and welded steel tubes. Part 10. Automated full peripheral ultrasonic testing for the detection of longitudinal and/or transverse imperfections

DIN EN ISO 10893-1:2011 钢管无损检测.第1部分:液压密闭度检验用无缝和焊接(埋弧焊除外)钢管的自动电磁检测法

This part of ISO 10893 specifies requirements for automated electromagnetic testing of seamless and welded steel tubes, with the exception of submerged arc-welded (SAW) tubes, for verification of hydraulic leak-tightness in substitution of hydrostatic test. It is applicable to the inspection of tubes with an outside diameter greater than or equal to 4 mm, when testing with eddy current, and greater than 10 mm when testing with flux leakage method.

Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011); German version EN ISO 10893-1:2011

DIN EN ISO 10893-2:2011 钢管无损检测.第2部分:缺陷探测用无缝和焊接(埋弧焊除外)钢管的自动涡流检测试验(ISO 10893-2-2011).德文版本EN ISO 10893-2-2011

This part of ISO 10893 specifies requirements for automated eddy current testing of seamless and welded tubes with the exception of submerged arc-welded (SAW) tubes, for the detection of imperfections according to the different acceptance levels as shown in Tables 1 and Table 2. It is applicable to the inspection of tubes with an outside diameter greater than or equal to 4 mm.

Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011); German version EN ISO 10893-2:2011

DIN EN ISO 10893-12:2011 钢管无损检测.第12部分:无缝和焊接(埋弧焊除外)钢管的自动全外围超声波测厚法(ISO 10893-12-2011).德文版本EN ISO 10893-12-2011

This part of ISO 10893 specifies requirements for the automated full peripheral ultrasonic testing of seamless and welded steel tubes, with the exception of submerged arc welded (SAW) tubes, for wall thickness measurement. It specifies the testing method and corresponding calibration procedures.

Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011); German version EN ISO 10893-12:2011

DIN EN ISO 10893-8:2011 钢管无损检测.第8部分:层状缺陷检测用无缝和焊接钢管的自动超声波探伤法(ISO 10893-8-2011).德文版本EN ISO 10893-8-2011

This part of ISO 10893 specifies requirements for automated ultrasonic testing for the detection of laminar imperfections a) in the pipe body (full peripheral testing) of seamless and welded, except submerged arc welded (SAW) steel tubes, or b) in the area adjacent to the weld seam of welded steel tubes. and optionally c) at the ends (full peripheral testing) of seamless and welded tubes.

Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011); German version EN ISO 10893-8:2011

DIN EN ISO 10893-9:2011 钢管无损检测.第9部分:用于焊接钢管制造的带材和板材的层状缺陷检测用自动超声波探伤法(ISO 10893-9-2011).德文版本EN ISO 10893-9-2011

This part of ISO 10893 specifies requirements for the automated ultrasonic testing of strip/plate used in the manufacture of welded tubes for the detection of laminar imperfections carried out in the pipe mill before or during pipe production.

Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011); German version EN ISO 10893-9:2011

DIN EN ISO 10893-6:2011 钢管无损检测.第6部分:缺陷检测用焊接钢管焊缝的放射性探伤(ISO 10893-6-2011).德文版本EN ISO 10893-6-2011

This Part of ISO 10893 specifies the requirements for film based radiographic X-ray testing of the longitudinal or helically (spiral) weld seams of automated fusion arc welded steel tubes for the detection of imperfections.

Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011); German version EN ISO 10893-6:2011

DIN EN ISO 10893-5:2011 钢管无损检测.第5部分:表面缺陷检测用无缝和焊接铁磁钢管的磁粉探伤检测法(ISO 10893-5-2011).德文版本EN ISO 10893-5-2011

This part of ISO 10893 specifies requirements for magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections on the tube body and the end/bevel face at the ends.

Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011); German version EN ISO 10893-5:2011

DIN EN ISO 10893-11:2011 钢管无损检测.第11部分:纵向和/或横向缺陷检测用焊接钢管焊缝的自动超声波探伤法(ISO 10893-11-2011).德文版本EN ISO 10893-11-2011

This part of ISO 10893 specifies requirements for the ultrasonic testing of the weld seam of longitudinally or helically submerged arc-welded (SAW), or electric resistance and induction welded (EW) steel tubes. For SAW tubes, the inspection covers the detection of imperfections oriented predominantly parallel to and/or, by agreement, perpendicular to the weld seam or both. For EW tubes, the inspection covers the detection of imperfections oriented predominantly parallel to the weld seam. In the case of testing on logitudinal imperfections, Lamb wave testing can be applied at the discretion of the manufacturer. For the detection of imperfections at weld seam of EW tubes, full peripheral ultrasonic testing is accepted. This part of ISO 10893 can also be applicable to the testing of circular hollow sections.

Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011); German version EN ISO 10893-11:2011

DIN EN ISO 10893-7:2011 钢管无损检测.第7部分:缺陷检测用焊接钢管焊缝的数字放射性探伤法(ISO 10893-7-2011).德文版本EN ISO 10893-7-2011

This part of ISO 10893 specifies the requirements for digital radiographic X-ray testing by either computed radiography (CR) or radiography with digital detector arrays (DDA), of the longitudinal or helically (spiral) weld seams of automatic fusion arc-welded steel tubes for the detection of imperfections. The standard specifies acceptance levels and calibration procedures.

Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011); German version EN ISO 10893-7:2011

DIN EN ISO 10893-4:2011 钢管无损检测.第4部分:表面缺陷检测用无缝焊接钢管的液体渗透检测法(ISO 10893-4-2011).德文版本EN ISO 10893-4-2011

This part of ISO 10893 specifies requirements applicable to liquid penetrant testing of seamless and welded tubes for the detection of surface imperfections. It is applicable to all or any part of the tube surface as required by the relevant product standards. It can also be applicable to the testing of hollow sections.

Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011); German version EN ISO 10893-4:2011