23.040.15;77.150.10 标准查询与下载

JIS H 4080:2015 铝和铝合金挤压管材和冷拔管材

Aluminium and aluminium alloy extruded tubes and cold-drawn tubes

JIS H 4040:2015 铝和铝合金棒材和丝材

Aluminium and aluminium alloy bars and wires

BS ISO 6362-2:2014 锻造铝和铝合金. 挤压杆材/棒材, 管材和型材. 机械性能

Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles. Mechanical properties

ISO 6362-2:2014 加工铝和铝合金挤压棒/条材、管材和型材.第2部分:力学性能

Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 2: Mechanical properties

ISO 6362-1:2012 加工铝和铝合金挤压棒/条材、管材和型材.第1部分:验收和交货的技术条件

This part of ISO 6362 specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy rods/bars, tubes and profiles for general engineering applications. It applies to extruded products, but does not apply to the following: — forging stock; — extruded precision profiles in alloys A6060 and A6063; — products delivered in coils; — coiled tubes cut to lengths.

Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 1: Technical conditions for inspection and delivery

ISO 6362-2:2012 加工铝和铝合金挤压棒/条材、管材和型材.第2部分:力学性能

This part of ISO 6362 specifies the mechanical properties of wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles for general engineering applications. It applies to extruded products.

Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 2: Mechanical properties

ISO 6363-2:2012 加工铝和铝合金冷拉棒/条材和管材.第2部分:力学性能

This part of ISO 6363 specifies the mechanical properties of wrought aluminium and aluminium alloy rods/bars, tubes and wires for general engineering applications (except aeronautical rivets). It applies to products which are extruded and then cold drawn. It does not apply to: — products which are rolled and then cold drawn, including seam-welded tubes; — forging stock, wire for drawing stock; — drawn wires for aeronautical application, electrical or welding purposes.

Wrought aluminium and aluminium alloys - Cold-drawn rods/bars and tubes and wires - Part 2: Mechanical properties

ISO 6363-6:2012 锻铝和铝合金.冷拉杆材/棒材,管材和线材.第6部分:拉制圆管.形状公差和尺寸规格

This part of ISO 6363 specifies the tolerances on form and dimensions of wrought aluminium and aluminium alloy drawn round tubes (seamless and porthole). This part of ISO 6363 applies to cold-drawn round tubes.

Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 6: Drawn round tubes - Tolerances on form and dimensions

ISO 6363-1:2012 加工铝和铝合金冷拉棒/条材和管材.第1部分:验收及交货技术条件

This part of ISO 6363 specifies the technical conditions for the inspection and delivery of wrought aluminium and aluminium alloys rods/bars, tubes and wires for general engineering applications. It applies to products which are extruded and then cold drawn. It does not apply to: — products which are rolled and then cold drawn, including seam-welded tubes; — forging stock, wire for drawing stock; — drawn wires for aeronautical application, electrical or welding purposes.

Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 1: Technical conditions for inspection and delivery

KS D ISO 6363-1:2004 锻铝和铝合金冷拉棒/条和管子.第1部分:检查及运输的技术条件

이 규격은 통상의 공업 제품에 사용되는 가공용 알루미늄 및 알루미늄 합금 봉 및 관의 검사

Wrought aluminium and aluminium alloy cold－drawn rods/bars and tubes－Part 1：Technical conditions for inspection and delivery

EN 755-7:1998 铝和铝合金.挤压棒材/条材,管材和型材.第7部分:无缝管的尺寸和形状公差

This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded seamless tubes with an outside diameter (OD) from 8 mm to 450 mm (round tube, see Figure 1) or with a cross section contained within a circumscribing circle (CD) from 10 mm to 350 mm (other than round tube, see Figure 2), supplied in straight lengths.This standard only applies to tube produced by the seamless die/mandrel method of extrusion.This standard applies to extruded seamless tube for general engineering applications only. The temper designations used inThis part are according to EN 515.This European Standard does not apply to: extruded tubes produced by porthole/bridge method (EN 755-8), tubes delivered in coils (prEN 13957), coiled tubes cut to length (prEN 13957).

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 7: Seamless Tubes, Tolerances on Dimensions and Form

EN 755-8:1998 铝和铝合金.挤压棒材/条材,管材和型材.第8部分:出口孔的尺寸和形状公差

This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded porthole tubes with an outside diameter (OD) from 8 mm to 450 mm (round tube; see Figure 1) or with a cross section contained within a circumscribing circle (CD) from 10 mm to 350 mm (other than round tube; see Figure 2); supplied in straight lengths.This standard only applies to extruded porthole tube for general engineering applications made in the following alloys: EN AW-1050A; EN AW-1200; EN AW-1350; EN AW-3003; EN AW-3103; EN AW-5005; EN AW-5005A; EN AW-5049; EN AW-5051A; EN AW-5251; EN AW-5052; EN AW-6101A; EN AW-6101B; EN AW-6005; EN AW-6005A; EN AW-6008; EN AW-6110A; EN AW6012; EN AW-6014; EN AW-6018; EN AW-6351; EN AW-6060; EN AW-6360; EN AW-6061; EN AW6261; EN AW-6262; EN AW-6262A; EN AW-6063; EN AW-6063A; EN AW-6463; EN AW-6065; EN AW-6081; EN AW-6082; EN AW-6182; EN AW-7003; EN AW-7005; EN AW-7108; EN AW-7108A; EN AW-7020. The temper designations used inThis part are according to EN 515.This standard only applies to tube produced by the tube porthole/bridge method.This standard does not apply to: extruded tubes produced by the seamless; die/mandrel method (EN 755-7); tubes delivered in coils (prEN 13957); coiled tubes cut to length (prEN 13957). Figure 1-Round tube Figure 2-Circumscribing circle for other than round tube

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 8: Porthole Tubes, Tolerances on Dimensions and Form

CNS 2673-1996 一般用途之碳钢锻钢件

本标准适用于一般用途之碳钢锻钢件（以下简称为锻钢件）。备考：本标准采用国际单位制（SI），｛｝内之单位及数值仅供参考。

Carbon Steel Forgings for General Use

CNS 2674-1995 铅管（一般用）

本标准适用于一般用铅管，（以下简称铅管），给水用铅管依 CNS 2675 铅管（给水用）之规定。

Lead Pipes (For General Purpose)

NF A50-802:1988 铝和铝合金.大直径焊接管.尺寸和公差

Aluminium and aluminium alloys. Large diameter welded tubes. Dimensions and tolerances.

NF A50-712:1986 铝和铝合金.一般用途卷状圆挤制管.尺寸和形状公差

Aluminium and aluminium alloys. Round extruded tubes in coils for general purpose. Dimensions and form tolerances.

GOST 18475-1982 铝及铝合金有轧制管及冷拉管.技术条件

Настоящий стандарт распространяется на холоднодеформированные трубы из алюминия и алюминиевых сплавов, предназначенные для нужд народн

Aluminium and aluminium alloy cold-rolled tubes. Specifications

GOST 18482-1979 铝和铝合金挤压管.规范

Настоящий стандарт распространяется на прессованные трубы из алюминия и алюминиевых сплавов, предназначенные для нужд народного хозяйст

Aluminium and aluminium alloy extruded tubes. Specifications

GOST 23697-1979 铝合金直缝焊接管.技术条件

Настоящий стандарт распространяется на сварные прямошовные трубы из алюминиевых сплавов

Welded straight-seam pipes of aluminium alloys. Specifications