23.040.20;91.140.80 标准查询与下载

ISO 13259:2018 无压地下应用热塑性塑料管道系统.人造橡胶密封环型接头试验方法

Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints

BS EN ISO 13257:2017 无压设施用热塑塑料系统.耐高温循环的试验方法

Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling

DS/CEN/TS 1565-2:2012 建筑结构内用于土壤和废物排放（低温和高温）的塑料管道系统 苯乙烯共聚物混合物（SAN+PVC） 第2部分：合格评定指南

This Technical Specification gives guidance for the assessment of conformity of materials (compounds/formulations), products and assemblies in accordance with EN 1565 1 intended to be included in the manufacturer"s quality plan as part of the quality mana

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity

DS/CEN/TS 1566-2:2012 建筑结构内用于土壤和废物排放（低温和高温）的塑料管道系统 氯化聚（氯乙烯）（PVC-C） 第2部分：合格评定指南

This Technical Specification gives guidance for the assessment of conformity of materials (compounds/formulations), products and assemblies in accordance with EN 1566 1 intended to be included in the manufacturer"s quality plan as part of the quality mana

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity

DS/CEN/TS 1455-2:2012 用于建筑结构内土壤和废物排放（低温和高温）的塑料管道系统 丙烯腈-丁二烯-苯乙烯（ABS） 第2部分：合格评定指南

This Technical Specification gives guidance for the assessment of conformity of materials (compounds/formulations), products and assemblies in accordance with EN 1455 1 intended to be included in the manufacturer"s quality plan as part of the quality mana

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity

DS/CEN/TS 1329-2:2012 建筑结构内用于土壤和废物排放（低温和高温）的塑料管道系统 未增塑聚（氯乙烯）（PVC-U） 第2部分：合格评定指南

This Technical Specification gives guidance for the assessment of conformity of compounds/formulations, products and assemblies in accordance with EN 1329 1 intended to be included in the manufacturer"s quality plan as part of the quality management syste

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

DIN CEN/TS 1519-2:2012 建筑结构中(低温和高温)渣土和废物排放用塑料管道系统.聚乙烯(PE).第2部分:合格评定指南

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1519-2:2012

DIN CEN/TS 1451-2:2012 建筑物内渣土和废物倾倒用塑料管道系统(低温和高温).聚丙烯.第2部分:合格评定导则

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1451-2:2012

PD CEN/TS 1455-2:2012 塑料管道系统的土壤和垃圾排放(低和高温)在建筑结构-丙烯腈-丁二烯-苯乙烯(ABS)-第2部分:指导评估的一致性

This Technical Specification gives guidance for the assessment of conformity of materials (compounds/formulations), products and assemblies in accordance with EN 1455-1 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of third-party certification procedures. NOTE 1 It is recommended that the quality management system conforms to or is no less stringent than the relevant requirements to EN ISO 9001. NOTE 2 If third-party certification is involved, it is recommended that the certification body is accredited to EN 45011, EN 45012 or EN ISO/IEC 17021, as applicable. NOTE 3 In order to help the reader, a basic test matrix is given in Annex A. In conjunction with EN 1455-1, this document is applicable to solid-wall piping systems made of acrylonitrile-butadiene-styrene (ABS) intended to be used for the following purposes: for soil and waste discharge (low and high temperature) inside buildings (application area code "B"); for soil and waste discharge (low and high temperature) inside buildings and buried in ground within the building structure (application area code "BD"). NOTE 4 This is reflected in the marking of products by "B" or "BD".

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity

DS/CEN/TS 1519-2:2012 建筑结构内用于土壤和废物排放（低温和高温）的塑料管道系统 聚乙烯（PE） 第2部分：合格评定指南

This Technical Specification gives guidance for the assessment of conformity of materials, products, joints and assemblies in accordance with the applicable part(s) of EN 1519 intended to be included in the manufacturer"s quality plan as part of the quali

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) - Part 2: Guidance for the assessment of conformity

DS/CEN/TS 1451-2:2012 建筑结构内用于土壤和废物排放（低温和高温）的塑料管道系统 聚丙烯（PP） 第2部分：合格评定指南

This Technical Specification gives guidance for the assessment of conformity of materials, products, joints and assemblies in accordance with the applicable part(s) of EN 1451 intended to be included in the manufacturer"s quality plan as part of the quali

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity

BS ISO 13257:2010 无压力应用的热塑性塑料管道系统.抗高温循环试验方法

Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling

BS ISO 13255:2010 地下和建筑物内排污用热塑性塑料管道系统.接头气密性试验方法

Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints

ISO 13257:2010 无压设施用热塑塑料系统.耐高温循环的试验方法

This International Standard specifies a method for testing the resistance of thermoplastics piping systems for soil and waste discharge inside buildings, application area “B”, or buried in the ground within the building structure, application areas “BD” or “UD”, to 1 500 cycles of elevated temperature cycling.

Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling

SANS 7682:2006 建筑物内污物和废物（低温和高温）排放用塑料管路系统．丙烯腈二乙烯树脂（ABS）

Specifies the requirements for solid-wall acrylonitrile-butadiene-styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) above ground inside buildings, as well as the system itself. It does not include buried pipework.

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)

ISO/TS 7024:2005 建筑物内污水废水排放用塑料管道系统(低温和高温).热塑塑料.推荐的安装规范

This Technical Specification gives the recommended practice for installation of thermoplastics piping systems in the field of soil and waste discharge (low and high temperature) inside buildings (marked with "B"). This Technical Specification is applicable to thermoplastics pipes and fittings as specified in the associated standards ISO 3633 (PVC-U), ISO 7671 (PP), ISO 7682 (ABS), ISO 8770 (PE-HD), ISO 19220 (SAN + PVC) and ISO 7675 (PVC-C), their joints and to joints with components of other plastics and non-plastics materials intended to be used for the following purposes. a) Soil and waste discharge pipework for the conveyance of domestic waste waters (low and high temperature). NOTE 1 See Clause 4 for waste discharge temperature limits. b) Ventilating pipework associated with a). c) Rainwater pipework within the building structure (see Figure 1). If specified in the relevant associated standard, this Technical Specification also covers soil and waste discharge pipework fixed externally on to the building (See Figure 1). It is not applicable to pipework that passes under the building without any connection from the discharge system. NOTE 2 According to the associated standards, for external above-ground soil and waste discharge, additional requirements depending on the climate are to be agreed between the manufacturer and the user. NOTE 3 According to the associated standards, components conforming to other standards on plastic piping systems may be used with pipes and fittings conforming to a given associated standard, if they conform to the requirements for joint dimensions and functional requirements of the given associated standard.

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation

ISO 7675:2003 建筑物内污、废水(低温和高温)排放用塑料管道系统.氯化聚氯乙烯

This International Standard specifies the requirements for chlorinated poly (vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) inside buildings, as well as the system itself. It does not include buried pipework. It also specifies the test parameters for the test methods referred to in this International Standard. This International Standard is applicable to PVC-C pipes and fittings, as well as assemblies of such pipes and fittings, intended to be used for the following purposes: a) soil and waste discharge pipework for the conveyance of domestic waste waters (low and high temperature); b) ventilation pipework associated with a); c) rainwater pipework inside the building. It is applicable to pipes and fittings designed for jointing by means of elastomeric sealing rings, solvent cementing or integral dual-purpose sockets, i.e. for elastomeric ring seal joints and/or for solvent cement joints.

Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)

DS/ENV 1453-2:2001 用于建筑物内土壤和废物排放（低温和高温）的带结构壁管的塑料管道系统 未增塑聚（氯乙烯）（PVC-U） 第2部分：合格评定指南

This European Prestandard gives guidance for the assessment of conformity to be included in the manufacturer's quality plan as part of the quality system. This prestandard includes: a) Requirements for materials, pipes, joints and assemblies given in EN 1453-1; b) Requirements for the manufacturer's quality system; c) Definitions and procedures to be applied if third party certification is involved. This part af EN 1453 is applicable to piping systems with structural-wall pipes made from unplasticized poly(vinyl chloride) (PVC-U) in the field of soil and waste discharge systems (low and high temperature) inside buildings (application area code ""B"").

Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

DS/EN 1453-1:2000 用于建筑物内土壤和废物排放（低温和高温）的带结构壁管的塑料管道系统 未增塑聚（氯乙烯）（PVC-U） 第1部分：管道和系统规范

This European Standard specifies the requirements for pipes and the system of unplasticized poly(vinyl chloride) (PVC-U) piping systems with structured-wall pipes intended to be used for soil and waste discharge (low and high temperature) inside buildings (marked with ""B""). It also specifies the test parameters for the test methods referred to in this standard. It covers pipes with an external and internal smooth layer which are connected with foamed PVC-U or by radial legs in solid PVC-U. The fully foamed PVC-U pipes and spiraly-formed PVC-U pipes are not covered by this standard.

Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: specifications for pipes and the system

DD ENV 1453-2-2000 建筑物内污物和废水排放(低和高温)带结构壁管道的塑料管道系统.未增塑聚氯乙烯(PVC-U).第2部分:合格评定指南

This European Prestandard gives guidance for the assessment of conformity to be included in the manufacturer's quality plan as part of the quality system.

Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity