23.140;75.180.20 标准查询与下载

NF E51-233-2*NF EN ISO 10439-2:2015 石油, 石化和天然气工业. 轴向和离心式压缩机以及膨胀机-压缩机. 第2部分: 非整体齿轮传动离心和轴向式压缩机

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2 : non-integrally geared centrifugal and axial compressors

NF E51-233-1*NF EN ISO 10439-1:2015 石油, 石化和天然气工业. 轴向和离心式压缩机以及膨胀机-压缩机. 第1部分: 通用要求

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1 : general requirements

NF E51-233-4*NF EN ISO 10439-4:2015 石油, 石化和天然气工业. 轴向和离心式压缩机以及膨胀机-压缩机. 第4部分: 膨胀机-压缩机

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part4 : expander-compressors

NF E51-233-3*NF EN ISO 10439-3:2015 石油, 石化和天然气工业. 轴向和离心式压缩机以及膨胀机-压缩机. 第3部分: 整体齿轮传动离心式压缩机

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 3 : integrally geared centrifugal compressors

DIN EN ISO 10442:2005 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机

This International Standard specifies requirements for the design, materials, fabrication, inspection, testing and preparation for shipment of constant-speed, packaged, integrally geared centrifugal air compressors, including their accessories for use in petroleum, chemical and gas service industries. It may be applied for gas services other than air that are non hazardous and non toxic. This standard is not applicable to machines that develop a pressure rise of less than 35 kPa above atmospheric pressure, which are classed as fans or blowers.#,,#

Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002); English version EN ISO 10442:2002

NF E51-235*NF EN ISO 13631:2003 石油和天然气工业.封闭的往复式气体压缩机

Petroleum and natural gas industries - Packaged reciprocating gas compressors.

DIN EN ISO 10440-2:2003 石油和天然气工业.旋转型容积式压缩机.第2部分:封装空气压缩机(无油)

Petroleum and natural gas industries - Rotary type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001); German and English version EN ISO 10440-2:2001

BS EN ISO 10442:2003 石油、化学和气体工业.整体封装齿轮传动离心空气压缩机

ISO 10442:2002 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of constant-speed, packaged, integrally geared centrifugal air compressors, including their accessories, for use in the petroleum, chemical and gas service industries. It is also applicable to gas services other than air that are non-hazardous and non-toxic. It is not applicable to machines that develop a pressure rise of less than 35 kPa above atmospheric pressure, which are classed as fans or blowers.

Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors

BS EN ISO 10439:2002 石油,化学和气体工业.离心压缩机

ISO 10439 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of centrifugal compressors for use in the petroleum, chemical and gas service industries. It is not applicable to machines that develop less than 35 kPa above atmospheric pressure, nor is it applicable to packaged, integrally geared centrifugal air compressors, which are covered in ISO 10442.

Petroleum, chemical and gas service industries. Centrifugal compressors

ISO 10442:2002 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机

This International Standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of constant-speed, packaged, integrally geared centrifugal air compressors, including their accessories, for use in the petroleum, chemical and gas service industries. It is also applicable to gas services other than air that are non-hazardous and non-toxic. It is not applicable to machines that develop a pressure rise of less than 35 kPa above atmospheric pressure, which are classed as fans or blowers. NOTE In this International Standard, where practical, US customary units have been included in brackets for information.

Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors

BS EN ISO 13631:2002 石油和天然气工业.整装往复式气体压缩机

ISO 13631:2002 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of packaged skid-mounted, reciprocating, separable or integral compressors with lubricated cylinders and their prime movers, for use in the petroleum and natural gas industries for the compression of hydrocarbon gas. It is also applicable to all necessary auxiliary equipment, such as water and gas coolers, silencers, emission control equipment, filters, separators, control panel, piping, etc., required to install an operable unit in compliance with the purchase specifications and with the intent of minimizing field construction and field-purchased equipment. ISO 13631:2002 is not applicable to the following: reciprocating compressors for petroleum and natural gas industries covered by ISO 13707; column-mounted compressors; non-lubricated compressors; compressors having trunk-type (automotive-type) pistons that also serve as crossheads; utility or instrument air compressors with a discharge gauge pressure of 0,9 MPa (9 bar) or less; compressors driven by diesel engine, gas turbine and steam turbine prime movers.

Petroleum and natural gas industries. Packaged reciprocating gas compressors

EN ISO 10442:2002 石油,石油化工和天然气工业 整装齿轮离心空气压缩机 ISO 10442-2002

Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors ISO 10442:2002

ISO 10440-2:2001 石油和天然气工业 旋转型容积式压缩机 第2部分：封装的空气压缩机（无油）

This part of ISO 10440 covers the minimum requirements for helical, spiral and straight-lobe, oil-free rotary compressors used for applications up to 0,20 MPa in refinery services. It is applicable to air (and other inert gas) compressors that are in continuous duty on process units. This part of ISO 10440 is not applicable to oil injected rotary compressors. NOTE A bullet (·) at the beginning of a clause or sub-clause indicates that either a decision is required or further information is to be provided by the purchaser. This information should be indicated on the data sheets; otherwise it should be stated in the quotation request or in the order.

Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free)

ISO 10440-1:2000 石油和天然气工业 旋转型容积式压缩机 第1部分:加工压缩机(无油)

This part of ISO 10440 specifies requirements and gives recommendations for helical, spiral and straight lobe rotary compressors used for vacuum or pressure, or both, for use in the petroleum and natural gas industries. This part of ISO 10440 is applicable to compressors that are in continuous duty and are unspared. This part of ISO 10440 does not apply to standard air compressors, liquid ring compressors, vane-type compressors, or compressors in oxygen-bearing gas service using flammable liquid for injection or flooding. NOTE A bullet (·) at the beginning of a paragraph indicates that either a decision is required or further information is to be provided by the purchaser. This information should be indicated on the data sheets (see annex A), otherwise it should be stated in the quotation request or in the order.

Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (oil-free)