25.160.20;49.025.10 标准查询与下载
共找到 115 条与 相关的标准，共 8 页
This specification covers a low-alloy steel in the form of welding wire. Type 2 - Copper Coated wire was removed from this document (see 8.5).
Steel@ Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted@ Environment Controlled Packaging (UNS K23015)
- ICS
- 25.160.20;49.025.10
- CCS
- 发布
- 2016-01-01
- 实施
This specification covers a low-alloy steel in the form of welding wire. Type 2 - Copper Coated Wire was removed from this document (see 8.5).
Steel@ Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted@ Environment Controlled Packaging (UNS G86200)
- ICS
- 25.160.20;49.025.10
- CCS
- 发布
- 2016-01-01
- 实施
This specification covers a low-alloy steel in the form of welding wire.
Wire, Steel Welding, 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C)
- ICS
- 25.160.20;49.025.10
- CCS
- 发布
- 2015-09-01
- 实施
This specification covers a low-alloy steel in the form of welding wire.
Steel, Welding Wire, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
- ICS
- 25.160.20;49.025.10
- CCS
- 发布
- 2015-09-01
- 实施
This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been used typically as bare wire filler metal for gas-tungsten-arc or gas-metal-arc welding of corrosion and heat resistant alloys of similar composition, but usage is not limited to such applications.The relatively high ferrite content promotes weldability by combating microfissuring and minimizing cracking in heavy sections but limits use of the wire to applications not operating in the sigma-forming temperature range, approximately 1100 to 1600 degrees F (590 to 870 degrees C).
Steel, Corrosion and Heat-Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb, High Ferrite Grade
- ICS
- 25.160.20;49.025.10
- CCS
- 发布
- 2014-02-27
- 实施
This specification covers an alloy steel in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc and gas-metal-arc welding of low-alloy steels having similar composition and requiring a combination of high strength and high notch toughness without the need for post-weld heat treatment, but usage is not limited to such applications.
Steel, Welding Wire 1.0Cr 10Ni 3.8Co 0.45Mo 0.08V (0.14-0.17C) Vacuum Melted, Environment Controlled Packaging
- ICS
- 25.160.20;49.025.10
- CCS
- J33
- 发布
- 2013-05-28
- 实施
This specification covers a maraging steel in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc and inert gas-metal-arc welding of maraging steels requiring a joint capable of being heat treated to 280 ksi (1931 MPa) tensile strength, but usage is not limited to such applications.
Wire, Steel Welding 18.5Ni 8.5Co 5.2Mo 0.72Ti 0.10Al (Marage 300), Vacuum Melted, Environment Controlled Packaging
- ICS
- 25.160.20;49.025.10
- CCS
- J33
- 发布
- 2013-05-23
- 实施
This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of steels of similar composition requiring joints with strength and corrosion resistance comparable to those of the basis metal, but usage is not limited to such applications.
Steel, Corrosion and Heat-Resistant, Welding Wire 20.5Cr 9.0Ni 0.50Mo 1.5W 1.2Cb 0.20Ti Vacuum Induction Melted
- ICS
- 25.160.20;49.025.10
- CCS
- V11
- 发布
- 2013-04-09
- 实施
This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc or gas-metal-arc welding of precipitation-hardenable, corrosion and heat resistant steels of similar composition, but usage is not limited to such applications.
Steel, Corrosion and Heat Resistant, Welding Wire 15Cr 25.5 Ni 1.3Mo 2.2Ti 0.006B 0.30V
- ICS
- 25.160.20;49.025.10
- CCS
- V11
- 发布
- 2013-02-18
- 实施
This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been use typically as filler metal for gas-metal- arc or gas-tungsten-arc welding of corrosion and heat resistant steels and alloys, but usage is not limited to such applications.
Steel, Corrosion and Heat Resistant, Welding Wire 9.0Mn 20Cr 6.2Ni 0.20N
- ICS
- 25.160.20;49.025.10
- CCS
- J33
- 发布
- 2013-02-11
- 实施
This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc or gas-metal-arc welding of critical weldments of precipitation-hardenable, corrosion and heat resistant steels of similar composition where the weld area is required to have strength and corrosion resistance comparable to those of the parent metal, but usage is not limited to such application.
Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V Vacuum Induction Melted, Environment Controlled Packaging (UNS S66286)
- ICS
- 25.160.20;49.025.10
- CCS
- J33
- 发布
- 2012-07-25
- 实施
This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc welding or gas-tungsten-arc of critical weldments of precipitation-hardenable, corrosion and heat resistant steels of similar composition where the weld area is required to have strength and corrosion resistance comparable to those of the parent metal, but usage is not limited to such applications. This filler metal provides joints with increased crack resistance over those using AMS 5805 wire when welding similar steels.
Steel, Corrosion and Heat Resistant, Welding Wire 15Cr 30Ni 1.2Mo 2.2Ti 0.25Al 0.001B 0.30V (0.01-0.03C), Vacuum Induction Melted, Environmental Controlled Packaging
- ICS
- 25.160.20;49.025.10
- CCS
- V11
- 发布
- 2012-06-01
- 实施
This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been use typically as filler metal for gas-metal- arc or gas-tungsten-arc welding of corrosion and heat resistant steels and alloys, but usage is not limited to such applications.
Steel, Corrosion and Heat Resistant, Welding Wire 9.0Mn 20Cr 6.2Ni 0.20N
- ICS
- 25.160.20;49.025.10
- CCS
- J33;V11
- 发布
- 2012-05-31
- 实施
This specification covers a low-alloy steel in the form of welding wire. This wire has been used typically for use as filler metal for gas-metal-arc or gas-tungsten-arc welding of steels of similar composition, but usage is not limited to such applications.
Steel, Welding Wire 0.30Cr 1.8Ni 0.40Mo (0.23 0.28C) Vacuum Melted, Environment Controlled Packaging
- ICS
- 25.160.20;49.025.10
- CCS
- J33
- 发布
- 2012-04-05
- 实施
This specification covers a low-alloy steel in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of critical weldments of low-alloy steels requiring a weld joint capable of being heat treated to a strength approximating that of the parent metal, but usage is not limited to such applications.
Steel, Welding Wire 1.0Cr 1.0Mo 0.12V (0.18 - 0.23C) Vacuum Melted
- ICS
- 25.160.20;49.025.10
- CCS
- J33;V11
- 发布
- 2012-04-05
- 实施
This specification covers a low-alloy steel in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc welding of heat-treatable steels of similar composition where the weld area is required to have strength comparable to that of the base metal, but usage is not limited to such applications.
Steel, Welding Wire 1.05Cr 0.55Ni 1.0Mo 0.08V (0.26 0.32C), Vacuum Melted, Environment-Controlled Packaging
- ICS
- 25.160.20;49.025.10
- CCS
- J33;V11
- 发布
- 2012-04-05
- 实施
This specification covers a low-alloy steel in the form of welding wire. This wire has been used typically for filler metal for gas-metal-arc or gas-tungsten-arc welding of critical weldments of low-alloy steels requiring a joint capable of being heat treated to a strength level approximating that of the basis metal, but usage is not limited to such applications.
Steel, Welding Wire 0.95Cr 0.20Mo (0.38-0.43C) Vacuum Melted, Environment Controlled Packaging
- ICS
- 25.160.20;49.025.10
- CCS
- J33;V11
- 发布
- 2012-04-05
- 实施
This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc or gas-metal-arc welding of corrosion and heat resistant steels and alloys, but usage is not limited to such applications.
Steel, Corrosion and Heat Resistant, Welding Wire 19Cr 12.5Ni 2.50Mo
- ICS
- 25.160.20;49.025.10
- CCS
- V11
- 发布
- 2011-10-21
- 实施
This specification covers a log-alloy steel in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc and gas-metal-arc welding of low-alloy steels of similar composition where the weld area is required to have strength comparable to that of the parent metal, but usage is not limited to such applications.
Steel, Welding Wire 0.65Si 1.25Cr 0.50Mo 0.30V (0.28 - 0.33C)
- ICS
- 25.160.20;49.025.10
- CCS
- V11
- 发布
- 2010-08-18
- 实施
This specification covers a corrosion and heat resistant steel in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc or gas-metal-arc welding of corrosion and heat resistant steels and alloys of similar composition, but usage is not limited to such applications.
Steel, Corrosion and Heat-Resistant, Welding Wire 27Cr - 21.5Ni (UNS S31080)
- ICS
- 25.160.20;49.025.10
- CCS
- V11;J33
- 发布
- 2010-06-16
- 实施
