25.160.20;49.025.20 标准查询与下载

SAE AMS4245E-2010 5.0Si 1.2Cu 0.50Mg(C355.0)铝合金焊条

This specification covers an aluminum alloy in the form of two types of welding wire. This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of aluminum alloy castings having similar composition and requiring, in the weld zone, response to heat treatment, properties, and corrosion resistance comparable to those of the castings, but usage is not limited to such applications.

Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (C355.0) (UNS A03550)

SAE AMS4189H-2009 4.1Si 0.2Mg铝合金焊条

This specification covers an aluminum alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of heavy sections of aluminum alloys of similar composition to produce joints having inherently low dilution ratio of base-metal to weld-metal, and where the weldment may require solution and/or precipitation heat treatment, but usage is not limited to such applications.

Aluminum Alloy, Welding Wire 4.1Si 0.2Mg (4643)

SAE AMS4191J-2009 铝合金 6.3Cu 0.3Mn 0.18Zr 0.15Ti 0.10V (2319)焊条

This specification covers an aluminum alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of aluminum alloys of similar composition where the joint is capable of being heat treated to a strength level comparable to that of the parent metal, but usage is not limited to such applications.

Aluminum Alloy, Welding Wire 6.3Cu 0.3Mn 0.18Zr 0.15Ti 0.10V (2319)

SAE AMS4190J-2009 铝合金焊条5.2Si (4043)

This specification covers an aluminum alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of aluminum alloys of similar composition, but usage is not limited to such applications.

Aluminum Alloy, Welding Wire 5.2Si (4043)

SAE AMS4244B-2008 焊接A206.0型合金用4.6Cu 0.35Mn 0.25Mg 0.22Ti铝合金焊丝

1.1 FormThis specification covers an aluminum alloy in the form of two types of welding wire.1.2 ApplicationThis wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of aluminum alloycastings having similar composition (206.0 and A206.0) and requiring response to heat treatment, properties, andcorrosion resistance in the weld zone comparable to those of the castings, but usage is not limited to such applications.1.3 ClassificationWire supplied to this specification is classified as follows:Type 1 - As Extruded and SizedType 2 - As Drawn1.3.1 Unless a specific type is ordered, either type may be supplied.

Aluminum Alloy, Welding Wire 4.6Cu 0.35Mn 0.25Mg 0.22Ti for Welding A206.0 Type Alloys

SAE AMS3414E-2007 铝焊接助熔剂

This specification covers an aluminum welding flux in the form of powder. This flux has been used typically for gas welding aluminum and aluminum alloys at 1150 °F (621 °C) and over, but usage is not limited to such applications.

Flux, Aluminum Welding

SAE AMS4181C-2003 7.0Si 0.38Mg 0.10Ti(4008或356)铝合金焊丝

This specification covers an aluminum alloy in the form of two types of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc and gas-metal-arc welding of aluminum alloy castings having similar composition and requiring, in the weld zone, comparable response to heat treatment, properties, and corrosion resistance to those of the castings, but usage is not limited to such applications.

Aluminum Alloy, Welding Wire 7.0Si 0.38Mg 0.10Ti (4008 or 356)

SAE AMS4246C-2003 7.0Si 0.52Mg(357)铝合金焊条

This specification covers an aluminum alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of aluminum alloy castings having similar composition and requiring, in the weld zone, response to heat treatment, properties, and corrosion resistance comparable to those of the castings, but usage is not limited to such applications.

Aluminum Alloy, Welding Wire 7.0Si 0.52Mg (357)

SAE AMS4233C-2003 UNS A02010 4.5Cu-0.70Ag-0.30Mn-0.25Mg-0.25Ti(201)铝合金焊丝

This specification covers an aluminum alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of aluminum alloy castings having similar composition and requiring, in the weld zone, response to heat treatment, properties, and corrosion resistance comparable to those of the castings, but usage is not limited to such applications.

Aluminum Alloy, Welding Wire 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201) UNS A02010

SAE AMS4246D-2003 铝合金7.0Si0.52Mg(357)焊丝

This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of February 2008. It is recommended, therefore, that this specification not be specified for new designs. "NONCURRENT" refers to those specifications which have previously been widely used and which may be required for production or processing of existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs. Similar but not necessarily identical products are covered in the following specification. However, this is provided for information only and does not constitute authority to substitute this specification for the "NONCURRENT" specification. AWS A5.10, R-357.0 This specification covers an aluminum alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of aluminum alloy castings having similar composition and requiring, in the weld zone, response to heat treatment, properties, and corrosion resistance comparable to those of the castings, but usage is not limited to such applications.

Aluminum Alloy, Welding Wire 7.0Si 0.52Mg (357)

SAE AMS4191G-2003 6.3Cu 0.3Mn 0.18Zr 0.15Ti 0.10V(2319)铝合金焊条

This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of January 2008. It is recommended, therefore, that this specification not be specified for new designs. NONCURRENT” refers to those specifications which have previously been widely used and which may be required for production or processing of existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs. Similar but not necessarily identical products are covered in the following specification. However, this is provided for information only and does not constitute authority to substitute this specification for the "NONCURRENT" specification. AWS A5.10, ER2319 This specification covers an aluminum alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of aluminum alloys where the joint is capable of being heat treated to a strength level comparable to that of the parent metal, but usage is not limited to such applications

Aluminum Alloy, Welding Wire 6.3Cu 0.3Mn 0.18Zr 0.15Ti 0.10V (2319)

SAE AMS4245C-2003 5.0Si 1.2Cu 0.50Mg(355)铝合金焊条

This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of January 2008. It is recommended, therefore, that this specification not be specified for new designs. "NONCURRENT" refers to those specifications which have previously been widely used and which may be required for production or processing of existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs. Similar but not necessarily identical products are covered in the following specification. However, this is provided for information only and does not constitute authority to substitute this specification for the "NONCURRENT" specification. AWS A5.10, R-C355.0 This specification covers an aluminum alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of aluminum alloy castings having similar composition and requiring, in the weld zone, response to heat treatment, properties, and corrosion resistance comparable to those of the castings, but usage is not limited to such applications.

Aluminum Alloy, Welding Wire 5.0Si 1.2Cu 0.50Mg (355)

SAE AMS4189F-2003 4.1Si 0.2Mg(4643)铝合金焊条

This specification covers Aluminum Alloy, Welding Wire 4.1Si 0.2Mg (4643)

Aluminum Alloy, Welding Wire 4.1Si 0.2Mg (4643)

SAE AMS3414D-2002 铝焊接助熔剂

This specification covers an aluminum welding flux in the form of powder. This flux has been used typically for gas welding aluminum and aluminum alloys at 1150 degrees F (620 degrees C) and over, but usage is not limited to such applications.

Flux, Aluminum Welding

SAE AMS4244A-2001 铝合金，焊丝 4.6Cu 0.35Mn 0.25Mg 0.22Ti 用于焊接 206 型合金

This specification covers an aluminum alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of aluminum alloy castings have similar composition (206.0 and A206.0) and requiring in the weld zone response to heat treatment, properties, and corrosion resistance comparable to those of the castings.

Aluminum Alloy, Welding Wire 4.6Cu 0.35Mn 0.25Mg 0.22Ti for Welding 206 Type Alloys