共找到 20 条与 相关的标准,共 2 页
Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method
This document specifies a chart rating system based on standard charts that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests. This rating system is applicable to pitting corrosion resulting from — accelerated tests, — exposure to corrosive environments, and — practical service tests. This document takes into account only pitting corrosion resulting from penetration of the protective anodic oxidation coating. NOTE
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method
Petrolatum paste and paste tapes for corrosion protection
이 표준은 부식 시험을 수행하는 알루미늄 및 알루미늄 합금의 양극산화피막 성능 수준을 정의
Anodizing of aluminium and its alloys-Rating system for the evaluation of pitting corrosion-Chart method
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2011)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method.
This International Standard specifies a grid rating system that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests. This rating system is applicable to pitting corrosion resulting from - accelerated tests, - exposure to corrosive environments, and - practical service tests. This International Standard takes into account only pitting corrosion of the basis metal resulting from penetration of the protective anodic oxidation coating. NOTE 1 ISO 8993[3] describes a similar rating system based on defined chart scales. NOTE 2 The grid rating system is frequently used for rating the results of short-term corrosion tests for relatively thin anodic oxidation coating, such as those used in the automotive industry.
Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Grid method
This International Standard specifies a grid rating system that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests. This rating system is applicable to pitting corrosion resulting from - accelerated tests, - exposure to corrosive environments, and - practical service tests. This International Standard takes into account only pitting corrosion of the basis metal resulting from penetration of the protective anodic oxidation coating. NOTE 1 ISO 8993[3] describes a similar rating system based on defined chart scales. NOTE 2 The grid rating system is frequently used for rating the results of short-term corrosion tests for relatively thin anodic oxidation coating, such as those used in the automotive industry.
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method
This International Standard specifies a grid rating system that provides a means of defining levels ofperformance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosiontests.
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2011)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2010)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method.
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method
This Standard specifies the petrolatum tapes which, through trference in this text, constitute provisions of this Standard.The most recent editions of the standards (including amendments)indicated below shall be applied.
Petrolatum tapes for corrosion protection
この規格は,鋼管,棒鋼,その他の鉄鋼の長期間防食に用いるペトロラタム系防食べージト(以下,防食ペーストという。)について規定する。
Petrolatum paste for corrosion protection
この規格は,アルミニウム及びアルミニウム合金の製品(以下,製品という。)に施した陽極酸化皮膜(以下,皮膜という。)のグリッド法による孔食の評価方法について規定する。
Evaluation methods for pitting corrosion of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Grid method
この規格は,アルミニウム及びアルミニウム合金の製品(以下,製品という。)に施した陽極酸化皮膜(以下,皮膜という。)のチャート法による孔食の評価方法について規定する。
Evaluation methods for pitting corrosion of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Chart method
この規格は,アルミニウム及びアルミニウム合金の製品(以下,製品という。)に施した陽極酸化皮膜(以下,皮膜という。)のキャス試験による耐食性試験方法について規定する。
Test methods for corrosion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: CASS test
この規格は,アルミニウム及びアルミニウム合金の製品(以下,製品という。)に施した陽極酸化皮膜(以下,皮膜という。)の耐アルカリ試験による耐食性試験方法について規定する。
Test methods for corrosion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Alkali resistance test
Petrolatum paste for corrosion protection
ANODIZED ALUMINIUM AND ALUMINIUM ALLOYS. RATING SYSTEM FOR THE EVALUATION OF PITTING CORROSION. CHART METHOD.
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号