27.040;27.100 标准查询与下载

NF X50-001-4-5*NF EN 45510-4-5:2002 电站设备的采购指南.第4-5部分:锅炉辅助设备.煤料搬运和散料存放场

Guide for procurement of power station equipment - Part 4-5 : boiler auxiliaries - Coal handling and bulk storage plant.

DIN EN 45510-4-5:2002 电厂设备采购指南.第4-5部分:锅炉辅助设备.煤搬运和散货堆存

The document gives guidance on writing technical specification for the procurement of coal handling and bulk storage plant for use in electricity generating stations (power stations). The document is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations.

Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant; German version EN 45510-4-5:2002

DIN EN 45510-4-4:2002 电厂设备采置指南.第4-4部分:锅炉辅助设备.燃料制备设备

Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries; Fuel preparation equipment; German version EN 45510-4-4:2002

BS EN 45510-4-4:2002 发电站设备的购置指南.锅炉附属设备.备燃料设备

This European Standard gives guidance on writing the technical specification for the procurement of fuel preparation plant for solid, liquid or gaseous fuels associated with steam generating plant, for use in electricity generating stations(power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers: - coal feeders; - pulverizers/mills; - classifiers; - pipework for pf, oil and gas; - oil pumps; - oil heaters; - oil filters; - shut-off dampers; - oil valves. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems such as the fuel handling systems and the boiler; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Boiler auxiliaries - Fuel preparation equipment

BS EN 45510-4-5:2002 发电站设备的购置指南.锅炉附属设备.煤的搬运和散货堆放厂

This standard gives guidance on writing the technical specification for the procurement of coal handling and bulk storage plant for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers all the permanent equipment which could be needed in a coal handling and bulk storage plant, for example: -wagon unloaders or wagon tipplers; -barges or ship unloaders; -machines for coal handling on the yard, coal stackers and coal reclaimers (bucket wheels, scrapers); -silos for coal mixing, buffer silos, hoppers, boiler house bunkers; -transfer towers between belt conveyors; -belt conveyors,bucket elevators; -metal structures(towers, conveyor tunnels); -screens and crushers; -metal separators for coal (magnetic or non magnetic pieces); -sampling devices, continuous weighers; -trippers or shuttle belt conveyors filling up boiler house bunkers. Some of the provisions may be applicable to other solid fuels, additives, by-products and waste. This guide does not cover the wharf, railway line or roads, boats, trains, trucks and other modes of transport to the site and their extension within the site. It does not cover mobile equipment such as bulldozers to compact coal heaps. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: -the equipment type and capacity interfaces correctly with other elements of the systems; -predicted performance is achieved; -ancillary equipment is properly sized; -reliability, availability and safety requirements are achieved; -proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: -any commercial, contractual or legal issues which are normally in separate parts of an enquiry; -any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still.under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Boiler auxiliaries - Coal handling and bulk storage plant

BS EN 45510-4-9:2000 发电站设备采购指南.锅炉辅助设备.除烟垢器.第9节:除烟垢器

This standard gives guidance on writing the technical specification for the procurement of sootblower equipment associated with steam generating plant for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers mechanical (steam or air) and acoustic sootblowers for the following applications: - furnace wall sootblowers and water lances; - long retractable and semi-retractable sootblowers; - rotating element sootblowers including rake sootblowers; - airheater sootblowers. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Boiler auxiliaries - Sootblowers - Section 9: Sootblowers

BS EN 45510-3-2:2000 发电站设备采购指南.锅炉.火管锅炉.第2节:火管锅炉

This standard gives guidance on writing the technical specification for the procurement of fired and unfired shell boilers for use in electricity generating stations (power stations). This Guide for Procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers shell boilers: - using solid, liquid or gaseous or derived fuels, waste heat utilization - with firing equipment for solid fuels, gas or oil firing - providing saturated steam, superheated steam or hot water. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems - predicted performance is achieved - ancillary equipment is properly sized - reliability, availability and safety requirements are achieved - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of the enquiry - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Boilers - Shell boilers - Section 2: Shell boilers

BS EN 45510-4-8:2000 发电站设备采购指南.锅炉辅助设备.尘埃处理装置.第8节:尘埃处理

This standard gives guidance on writing the technical specification for the procurement of equipment for dust handling associated with coal fired steam generating plant for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers the devices for pneumatic, mechanical and hydraulic conveying of different design. Pneumatic conveying systems use compressed air or inert gas in different ways. Air activated gravity flow is used in the air slide. Other pneumatic systems use gas as conveying medium for the dust in pipelines; those are differentiated by the velocity of conveyance. Dilute phase conveying systems also known as high-velocity conveying systems include: - ejectors; - dust pumps; - elevators (airlift). Dense phase conveying systems, using pressure vessel conveyors as transmitters include: - plug conveyors (batch conveyors); - turbulent flow conveyors. Mechanical conveyors systems for dust handling include: - belt conveyors (moistened dust); - drag link conveyors; - bucket elevators; - silo vehicles. Hydraulic conveying systems use pressurized water as conveying medium in pipelines; These include:: - slurry pumps; - ejectors. A multitude of accessories can be necessary to form a complete dust removal plant. If fly ash is to be utilized it mostly is to be kept in dry condition. In consequence the dust handling systems for this purpose are limited to pneumatic and mechanical devices or a combination of both. Hydraulic conveyance of fly ash is preferably employed in combination with hydraulic ash handling if all combustion residues are to be dumped as waste. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems such as the boiler and gas treatment plant; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment. Boiler auxiliaries. Dust handling plant. Section 8: Dust handling

BS EN 45510-3-1:2000 发电站设备采购指南.锅炉.水管锅炉.第1节:水管锅炉

This standard gives guidance on writing the technical specification for the procurement of water tube boilers for use in electricity generating stations (power stations). This Guide for Procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers water tube boilers: - using solid, liquid or gaseous fuels and for heat recovery - with pulverized fuel, stoker or cyclone firing, gas or oil firing - with once through or recirculation (natural or assisted) evaporators - with balanced-draught or pressurized draught plant systems - with specific direction of gas flow over the heating surface e. g. vertically upward, horizontal or a combination. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems - predicted performance is achieved - ancillary equipment is properly sized - reliability, availability and safety requirements are achieved - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of the enquiry - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Boilers - Water tube boilers - Section 1: Water tube boilers

BS EN 45510-3-3:2000 发电站设备采购指南.锅炉.流化床燃烧锅炉.第3节:流化床燃烧锅炉

This standard gives guidance on writing the technical specification for the procurement of boiler (with fluidized bed firing) for use in electricity generating stations (power stations). This Guide for Procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers water tube boilers and shell boilers: - with atmospheric bubbling (stationary) and atmospheric circulating fluidized bed firing; - with pressurized stationary and pressurized circulating fluidized bed firing systems; - using solid, liquid, gaseous or derived fuels; - using additives for control of gaseous emissions; - with once-through or recirculation (natural or assisted) evaporators. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of the enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Boilers - Boilers with fluidized bed firing - Section 3: Boilers with fluidised bed firing

DIN EN 45510-3-1:2000 电厂设备采购指南.第3-1部分:锅炉.水管锅炉

The document gives guidance on writing the technical specification for the procurement of water tube boilers to be installed in electric power plants.

Guide for procurement of power station equipment - Part 3-1: Boilers; water tube boilers; German version EN 45510-3-1:1999

DIN EN 45510-3-2:2000 电厂设备采购指南.第3-2部分:锅炉.火管锅炉

The document gives guidance on writing the technical specification for the procurement of shell boilers to be installed in electric power plants.

Guide for procurement of power station equipment - Part 3-2: Boilers; shell boilers; German version EN 45510-3-2:1999

DIN EN 45510-3-3:2000 电厂设备采购指南.第3-4部分:锅炉.沸腾燃烧锅炉

The document gives guidance on writing the technical specification for the procurement of fluidized bed boilers to be installed in electric power plants.

Guide for procurement of power station equipment - Part 3-3: Boilers; boilers with fluidized bed firing; German version EN 45510-3-3:1999

DIN EN 45510-4-8:1999 电厂设备采购指南.第4-8部分:锅炉附件.灰尘处理设备

The document gives guidance on writing the technical specification for the procurement of equipment for dust handling associated with coal fired steam generating plant for use in electricity generating stations (power stations). This guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations.

Guide for procurement of power station equipment - Part 4-8: Boiler auxiliaries - Dust handling plant; German version EN 45510-4-8:1999

DIN EN 45510-4-9:1999 电厂设备采购指南.第4-9部分:锅炉附件.吹灰机

The document gives guidance on writing the technical specification for the procurement of sootblower equipment associated with steam generating plant for use in electricity generating stations (power stations). This guide for procurement is not applicable to equipment for use in the nuclear reactor oplant area of nuclear power stations.

Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers; German version EN 45510-4-9:1999

BS EN 45510-4-7:1999 发电站设备采购指南.锅炉附属设备.炉灰装运设备

This standard gives guidance on writing the technical specification for the procurement of equipment for ash handling associated with coal-fired steam generating plant for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers mechanical conveying systems which handle the ash mechanically. Among those are, for example: —submerged scraper conveyor; —ram-type slag extractor; —belt conveyor, —drag-link conveyor; —vibratory conveyor; —screw conveyor; —apron conveyor; —bucket elevator; —skip hoist; —vehicles. Hydraulic conveying systems use water as conveying medium. These include, for example: —water-filled ash hopper; —dry ash hopper; —sluiceway; —slurry pump with pipeline; —ejector with pipeline. Generally a combination of the above systems is employed. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: —the equipment type and capacity interfaces correctly with other elements of the systems such as the boiler and gas treatment plant; —predicted performance is achieved; —ancillary equipment is properly sized; —reliability, availability and safety requirements are achieved; —proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract, which is normally decided on the basis of the purchaser's project strategy. It does not cover. —any commercial, contractual or legal issues, which are normally in separate parts of an enquiry, —any allocation of responsibilities, which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Boiler auxiliaries - Ash handling plant - Ash handling plant

DIN EN 45510-4-7:1999 电站设备购置指南.第4-7部分:锅炉辅助设备.锅炉灰搬运处理设备

The document gives guidance on writing the technical specification for the procurement of equipment for ash handling associated with coal fired steam generating plant for use in electricity generating stations (power stations). This guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations.

Guide for procurement of power station equipment - Part 4-7: Boiler auxiliaries; ash handling plant; German version EN 45510-4-7:1999

ANSI/ISA 77.13.01-1999 火电厂汽轮机旁路系统

Establishes the applicable code requirements and boundaries for the design and installation of instrument-sensing lines interconnecting nuclear safety-related power plant processes with both nuclear safety-related and non-nuclear safety-related instrumentation. Covers design, protection, and installation of nuclear safety-related instrument sensing lines for light water-cooled nuclear power plants and covers the pressure boundary requirements for sensing lines up to and including 1-inch (25.4-mm) outside diameter or three-quater-inch nominal pipe.

Fossil Fuel Power Plant Steam Turbine Bypass System

EN 45510-4-9:1999 发电站设备的采购指南.第4-9部分:锅炉辅助设备.吹灰器

This standard gives guidance on writingThe technical speciification forThe procurement of sootblower equipment associated with steam generating plant for use in electricity generating sfations (power stations).This Guide for procurement is not applicable to equipment for use inThe nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered inThe preparation of this Guide.

Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers

DS/EN 45510-6-1:1998 电站设备采购指南第6-1部分：汽轮机辅机除氧器

This standard gives guidance on writing the technical specification for the procurement of deaerators associated with steam generating plant and steam turbine plant for use in electricity generating stations (power stations).

Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators