热泵标准-分析测试百科网

GB/T 18405-2008 缩微摄影技术.ISO字符和ISO 1号测试图的特征及其使用

本标准规定了ISO黑白字符的特征与ISO 1号测试图的特征及其使用方法。本标准适用于给定缩微系统所生成的缩微影像的质量控制，以及使用该系统制作的缩微品的潜在可读性。

Micrographics.ISO character and ISO test chart No.1.Description and use

ICS: 27.080
CCS: A14
发布: 2008-07-16
实施: 2009-01-01

GB/T 19409-2003 水源热泵机组

本标准规定了水源热泵机组的术语和定义、型式和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于以电动机械压缩式系统，以水为冷(热)源的户用、工商业用和类似用途的水源热泵机组。

Water-source heat pumps

ICS: 27.080
CCS: J73
发布: 2003-11-25
实施: 2004-06-01

FprEN 12309-3 净热输入不超过 70 kW 的用于加热和/或冷却的燃气吸附装置第3部分：要求、测试条件和测试方法

1.1 Scope of EN 12309 series Appliances covered by this document include one or a combination of the following: — gas-fired sorption chiller; — gas-fired sorption chiller/heater; — gas-fired sorption heat pump; — hybrids based on gas sorption appliances This document applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery. This document applies to appliances having flue gas systems of Type B and Type C (according to EN 1749:2020) and to appliances designed for outdoor installations, including Type A. EN 12309 does not apply to air conditioners, it only applies to appliances having: — integral burners under the control of fully automatic burner control systems, — closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated, — mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309 1:2023). In the case of packaged units (consisting of several parts), this document applies only to those designed and supplied as a complete package. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309. Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309. All the symbols given in this text are to be used regardless of the language used. 1.2 Scope of this Part 3 of EN 12309 This part of EN 12309 specifies the requirements, test methods and conditions for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. This part of EN 12309 deals particularly with test protocols and tools to calculate the capacity, the gas utilization efficiency and the electrical power input of the appliance. This data can be used in particular to calculate the seasonal efficiency of the appliance.

Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Requirements, test conditions and test methods

ICS: 27.080
CCS
发布: 2024-05-15
实施

BS ISO 21978:2023 空气-水热泵部分负荷条件下的测试和评级以及空间供暖季节性性能系数的计算

Air to water heat pumps. Testing and rating at part load conditions and calculation of seasonal coefficient of performance for space heating

ICS: 27.080
CCS
发布: 2023-12-31
实施: 2023-12-31

T/JSJXXH 014-2023 海上升压站调试规范

海上风电场离岸较远时，为了减小传输时的电能损耗，需要建造海上升压站将风机输出电压升压后通过海缆送至陆上集控中心。海上升压站是整个风电场的核心，是海上风电并网过程中至关重要的一环，内部布置了较多特定功能的重要设备，且涉及多个专业施工。海上升压站各专业调试是一项系统而复杂的工程，其受到的外界影响因素较多，如调试环境、调试温度以及湿度等，在调试过程中必须制定合理的调试顺序，确保每道工序都能满足要求后方可进入下道工序，以确保海上升压站调试结果符合产品要求。海上升压站各专业调试的控制要求，主要包含电气一次设备调试、电气二次设备调试、柴油发电机调试、甲板机械调试、行车调试、克令吊调试、高压细水雾管路系统调试、给排水系统调试以及通风系统调整等要求。

Specification for commissioning of Offshore Station