29.035.01;29.035.20 标准查询与下载

IEC 60811-511:2012/AMD1:2017 电缆和光缆.非金属材料试验方法.第511部分:机械试验.聚乙烯和聚丙烯化合物熔融指数测量.修改件1

Replace the existing paragraph by the following new text: This Part 511 of IEC 60811 describes the procedure for the measurement of the melt flow index for polyethylene and polypropylene compounds.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds; Amendment 1

IEC 60811-511:2017 电缆和光缆.非金属材料试验方法.第511部分:机械试验.聚乙烯和聚丙烯化合物熔融指数测量

This Part 511 of IEC 60811 describes the procedure for the measurement of the melt flow index for polyethylene and polypropylene compounds.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds

IEC 61212-3-2:2013 绝缘材料.电工用基于热固树脂的工业刚性圆形层压管材和杆材.第3部分:单项材料规范.活页2:圆形层压模制管材

This part of IEC 61212 gives requirements for industrial rigid round laminated moulded tubes for electrical purposes, based on different resins and different reinforcements. Applications and distinguishing properties are given in Table 1. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety Warning: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes

IEC 61212-3-1:2013 绝缘材料.电工用热固性树脂基工业刚性圆形层压管和棒.第3部分:单项材料规格.活页1:圆形层压轧制管

This part of IEC 61212 gives requirements for industrial rigid round laminated rolled tubes for electrical purposes, based on different resins and different reinforcements. Applications and distinguishing properties are given in Table 1. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes

IEC 60455-3-8:2013 电气绝缘用树脂基活性化合物.第3部分:单项材料规格.活页8:电缆附件树脂

This sheet 8 of IEC 60455-3 gives the requirements for resins for power cable accessories which conform to this specification and meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not on this specification alone.

Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories

IEC 60893-3-4:2012 绝缘材料.基于电气目的热固树脂的工业刚性层压板.第3-4部分:独立材料的规格.基于酚醛树脂的刚性层压板要求

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins

IEC 60893-3-1:2012 绝缘材料.电工用热固性树脂工业硬质层压片.第3-1部分:专用材料规格.对工业硬质层压片类型的要求

This part of IEC 60893 provides requirements for various materials. Their properties are given in subsequent Part 3 specification sheets. Materials which conform to this specification meet established levels of performance. However@ the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheet

IEC 60811-100:2012 电缆和光缆.非金属材料试验方法.第100部分:总则

Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General

IEC 60893-3-3:2012 绝缘材料.电工用工业刚性热固性树脂基层压板材.第3-3部分:单项材料规范.三聚氰胺树脂基刚性层压板的要求

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins

IEC 60893-3-2:2011 绝缘材料:电力用热固树脂制工业层压硬板.第3-2部分:单一物料的规格.环氧树脂制层压硬板的要求

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxide resins

IEC 60893-3-3:2003/AMD1:2011 绝缘材料.电力用热固树脂制工业层压硬板.第3-3部分:单一物料的规格.三聚氰胺树脂制层压硬板的要求

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

IEC 62329-3-100:2010 热缩模具形状.第3部分:形状尺寸规格、材料要求和兼容性性能的要求规范.活页100:热缩模具形状尺寸规格

This sheet of IEC 62329-3 gives the dimensional requirements for heat-shrinkable moulded shapes. The moulded shapes may be supplied with a pre-coated adhesive. Refer to the manufacturers/suppliers for options. These moulded shapes are normally supplied in the styles and dimensions given in Tables 1 to 22. The colour is normally black. Styles and dimensions other than those specifically listed in Tables 1 to 22 may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in the sheets for material performance, with the exception of dimensions. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions

IEC 62329-3-102:2010 热缩模具形状.第3部分:形状尺寸、材料要求和兼容性性能的要求规范.活页102:半刚性的热缩弹性模具形状的材料要求和系统性能

This sheet of IEC 62329-3 gives the requirements for heat-shrinkable elastomeric moulded shape, semi-rigid material requirements and system performance. Experience of product performance indicates that this moulded shape material is suitable for inclusion in systems for operation in the following temperature ranges: –75 °C to + 120 °C. The moulded shapes may be supplied with a pre-coated adhesive. Refer to the manufacturers/suppliers for options. A guide to adhesive compatibility is given in Annex A. These moulded shapes are normally supplied in the styles and dimensions given in IEC 62329-3- 100. The colour is normally Black. Styles and dimensions other than those specifically listed in IEC 62329-3-100 may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in Table 1 with the exception of dimensions. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance

IEC 62329-3-101:2010 热缩模具形状.第3部分:形状尺寸、材料要求和兼容性性能的要求规范.活页101:聚烯烃半刚性的热缩模具形状的有限火患、材料要求和系统性能

This sheet of IEC 62329-3 gives the requirements for heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance. Experience of product performance indicates that this moulded shape material is suitable for inclusion in systems for operation in the following temperature range: –30 °C to + 105 °C. The moulded shapes may be supplied with a pre-coated adhesive. Refer to the manufacturers/suppliers for options. A guide to adhesive compatibility is given in Annex A. These moulded shapes are normally supplied in the styles and dimensions given in IEC 62329-3- 100. The colour is normally black. Styles and dimensions other than those specifically listed in IEC 62329-3-100 may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in Table 1 with the exception of dimensions. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements a

IEC 60893-3-6:2009 绝缘材料.电工用热固性树脂工业硬质层压片.第3-6部分:专用材料规范.对硅树脂刚性层压片的要求

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

IEC 60893-3-7:2009 绝缘材料.电工用热固性树脂工业硬质层压片.第3-7部分:专用材料规范.对聚酰亚胺树脂基刚性层压片的要求

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins

IEC 60893-3-5:2009 绝缘材料.基于电气目的热固树脂的工业刚性层压板.第3-5部分:独立材料的规格.基于聚酯树脂的刚性层压板要求

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins

IEC 60893-3-6:2003/AMD1:2009 绝缘材料.电工用热固性树脂工业硬质层压片.第3-6部分:专用材料规范.基于有机硅树脂的刚性胶合板要求.修改件1

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins; Amendment 1

IEC 61212-3-3:2006 绝缘材料.电工用热固性树脂工业硬质圆形层压管和棒.第3部分:单项材料规范.活页3:圆形层压模制棒

This part of IEC 61212-3 gives requirements for industrial rigid round laminated moulded rods for electrical purposes, based on different resins and different reinforcements. Applications and distinguishing properties are given in Table 1. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods