29.035.60 涂层织物 标准查询与下载

GB/T 1310.1-2006 电气用浸渍织物.第1部分:定义和一般要求

本标准规定了电气用浸渍织物有关的定义和应达到的一般要求。 本标准适用于以棉、天然丝或合成纤维(包括玻璃纤维)织物为基材，以整幅成卷、成张或切成各种宽度的带材供应的浸渍织物。

Varnished fabrics for electrical purposes.Part 1:Definitions and general requirements

ASTM D115-17(2024) 电绝缘用含溶剂清漆的试验方法

Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation

ASTM D3056-23 无溶剂清漆凝胶时间的标准试验方法

Standard Test Method for Gel Time of Solventless Varnishes

T/ZS 0458-2023 涂层遮阳布

前言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 分类　 5 技术要求　 6 试验方法　 7  检验规则　 8  标志、包装、运输、贮存　

Coated blackout fabrics

ASTM D3955-20 电绝缘漆的标准规格

1.1 This specification covers the tests and values for electrical insulating varnishes, as supplied, which are suitable for the impregnation and treatment of electrical coils and windings applied by dip process. 1.2 Varnishes, flexible or rigid, included in this specification are: Grade DA—Air-dry Grade DO—Organic solvent containing, baking, Grade DM—Reactive diluent containing, Grade DS—Silicone, Grade DW—Water containing, and Grade DT—Thixotropic. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. NOTE 1—This specification resembles IEC 60455 in title only. The content is significantly different. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Electrical Insulating Varnishes

ASTM D3145-20 用螺旋线圈法测定电绝缘清漆耐热性的标准试验方法

1.1 This test method covers the determination of the thermal endurance of electrical insulating varnishes alone or in combinations with magnet wire insulation. Changes in the helical coil bond strength are used as the test criteria. The coils are made from bare aluminum or copper wire, or from filmor fiber-insulated magnet wire. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. NOTE 1—There is no similar or equivalent IEC standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific precautionary statement, see Section 7. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by Helical Coil Method

ASTM D1932-19 挠性电绝缘清漆耐热性的标准试验方法

1.1 This test method covers the determination of the relative thermal endurance of flexible electrical insulating varnishes by determining the time necessary at elevated temperatures to decrease the dielectric breakdown of the varnish to an arbitrarily selected value when applied to a standard glass fiber fabric. 1.2 This test method does not apply to varnishes that lose a high percentage of their dielectric breakdown voltage when flexed before elevated temperature exposure as prescribed in the screening test (Section 9). Examples of such varnishes are those used for high speed armatures and laminated structures. Also, this test method is not applicable to varnishes which distort sufficiently during thermal elevated temperature exposure so that they cannot be tested using the curved electrode assembly. 1.3 Thermal endurance is expressed in terms of a temperature index. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. NOTE 1—There is no equivalent IEC or ISO standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes

ASTM D2519-19a 用螺旋线圈试验测定电绝缘清漆粘合强度的标准试验方法

1.1 This test method covers determination of the bond strength of an electrical insulating varnish when applied to a helical coil. The helical coil can be made from bare aluminum or copper wire or from film or fiber-insulated magnet wire. Helical coils made from bare aluminum or bare copper wire will yield values of bond strength for the varnish when applied to bare metal conductors. The use of film or fiber-insulated magnet wire will show values for that particular combination of insulation and varnish. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Section 7. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

ASTM D360-12(2019) 虫胶清漆的标准规范

1.1 This specification covers shellac varnish consisting of a solution or “cut” of a specified type and grade of dry lac resin in specially denatured alcohol. Ninety-five percent (190 proof) ethyl alcohol, specially denatured according to Formula No. 1 of the Alcohol, Tobacco, and Firearms of the Treasury Dept., is the solvent most commonly used. However, other specially denatured alcohols and proprietary solvents are also used for this purpose. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Shellac Varnishes

ASTM D2519-19 用螺旋线圈试验测定电绝缘清漆粘合强度的标准试验方法

Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

ASTM D3251-19 用于绝缘电磁线的电绝缘油的耐热特性的标准测试方法

1.1 This test method covers the determination of the thermal endurance characteristics of electrical insulating varnishes and film-insulated magnet wire in combination. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—This test method is equivalent to IEC 60172. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

ASTM D3145-18 通过螺旋线圈法测定电气绝缘漆的耐热性的标准试验方法

Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method

ASTM D1932-18 挠性电绝缘清漆耐热性的标准试验方法

Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes

ASTM D2519-18 用螺旋线圈试验测定电绝缘清漆粘合强度的标准试验方法

Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

ASTM D3056-14(2018) 无溶剂清漆凝胶时间的标准测试方法

1.1 This test method covers the determination of the gel time of a solventless varnish mixed with a catalyst, if required, and exposed to elevated temperature. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific precaution statement, see Section 6. NOTE 1—Although this standard and IEC 60455–2 differ in approach or detail, data obtained using either are technically equivalent. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Gel Time of Solventless Varnishes

ASTM D3377-04(2018) 无溶剂清漆减重的标准试验方法

1.1 This test method covers the determination of the percent weight loss of cured solventless electrical varnishes when exposed to elevated temperatures for prescribed periods of time. 1.2 Results of this test method are based on 6-mm (1⁄4-in.) thick specimens and will not be applicable to specimens appreciably thinner or thicker than 6 mm. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—This standard resembles IEC 60216–2 “Guide for the determination of thermal endurance properties of electrical insulating materials. Part 2: Choice of test criteria” in a number of ways, but is not consistently similar throughout. The data obtained using either standard will possibly be technically equivalent. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Weight Loss of Solventless Varnishes

ASTM D4880-18 绝缘漆的盐水防腐标准测试方法

1.1 This test method covers the electrical performance in a specified water solution of an insulating varnish applied over enamelled magnet wire. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 6. NOTE 1—There is no IEC method equivalent to this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire

ASTM D6053-14(2018) 电绝缘清漆中挥发性有机化合物含量测定的标准试验方法

1.1 This test method covers the determination of the amount of volatile organic compounds emitted during cure of electrical insulating varnishes. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Section 7 for specific precautions. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

ASTM D5638-18 电绝缘漆耐化学性的标准试验方法

1.1 This test method covers the mechanical performance of insulating varnishes after exposure to various chemicals. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See 7.1. NOTE 1—There is no IEC/ISO equivalent. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

KS C IEC 60394-3-2-2018(2023) 电工用清漆织物第3部分:单项材料规范活页2:环氧、聚氨酯、硅树脂、聚酯、沥青或油树脂清漆的玻璃织物基清漆织物

Varnished fabrics for electrical purposes — Part 3: Specifications for individual materials — Sheets 2: Glass-fabric based varnished fabrics with epoxy, polyurethane, silicone, polyester, bituminous o