29.060.20;29.120.20 标准查询与下载

IEC 61238-1-3:2018 电力电缆用压缩和机械连接器. 第1-3部分: 在非绝缘导体上测试的额定电压超过1kV(Um=1,2kV)至30kV(Um=36kV)的电力电缆用压缩和机械连接器的试验方法和要求

This part of IEC 61238 applies to compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV), for example buried cables or cables installed in buildings, having a) conductors complying with IEC 60228 having nominal cross-sectional areas between 2,5 mm2 and 1200 mm2 for copper and between 16 mm2 and 1200 mm2 for aluminium, excluding Milliken conductors; b) a maximum continuous conductor temperature not exceeding 90 °C. This document is not applicable to connectors for overhead line conductors nor to connectors with a sliding contact. The object of this document is to define the type test methods and requirements which apply to compression and mechanical connectors for power cables with copper or aluminium conductors. The reference method is to perform the tests on unused conductors.

Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated conduc

IEC 61238-1-1:2018 电力电缆用压缩和机械连接器. 第1-1部分: 在非绝缘导体上测试的额定电压达1kV(Um=1,2kV)的电力电缆用压缩和机械连接器的试验方法和要求

This part of IEC 61238 applies to compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV), for example buried cables or cables installed in buildings, having a) conductors complying with IEC 60228 having nominal cross-sectional areas between 2,5 mm2 and 1200 mm2 for copper and between 16 mm2 and 1200 mm2 for aluminium; b) a maximum continuous conductor temperature not exceeding 90 °C. This document is not applicable to connectors for overhead line conductors nor to connectors with a sliding contact. The object of this document is to define the type test methods and requirements which apply to compression and mechanical connectors for power cables with copper or aluminium conductors. The reference method is to perform the tests on unused conductors.

Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors

BS 7888-4.1:2006 额定电压从3.6/6(7.2)kV到20.8/36(42)kV的电力电缆附件的试验要求.带挤压绝缘层的电缆

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV - Cables with extruded insulation

BS 7888-4.2:2006 额定电压从3.6/6(7.2)kV到20.8/36(42)kV的电力电缆附件的试验要求.带浸渍纸绝缘层的电缆

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV - Cables with impregnated paper insulation

BS 7888-4.1:2006+A1:2008 额定电压 3.6/6(7,2)kV 至 20.8/36(42)kV 电力电缆附件的测试要求 挤压绝缘电缆

This standard specifies performance requirements for type tests for cable accessories for use on extruded insulation power cables as specified in HD 620.

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV. Cables with extruded insulation

BS 7888-4.2:2006+A1:2008 额定电压 3.6/6(7,2)kV 至 20.8/36(42)kV 电力电缆附件的测试要求 浸渍纸绝缘电缆

This standard specifies performance requirements for type tests for cable accessories for use on impregnated paper insulated power cables as specified in HD 621.

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV. Cables with impregnated paper insulation

BS 7888-4.1:1998 中压(MV)附件的试验要求.带挤制绝缘层电缆用附件

To be read in conjunction with BS 7888-1, BS 7888-2

Test requirements for MV accessories - Accessories for cables with extruded insulation - Section: 4-1: Accessories for cables with extruded insulation

BS 7888-4.2:1998 中压(MV)附件的试验要求.带浸渍纸绝缘层电缆用附件

To be read in conjunction with BS 7888-1:1998, BS 7888-2:1998

LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV) - Test requirements for MV accessories - Accessories for cables with impregnated paper insulation

BS 7888-2:1998 额定电压0.6/1KV到并包括20.8/36kv(UDOWNm=42 kV)的电力电缆用低压和中压附件.试验方法

Collates and specifies test methods for type testing accessories for polymeric cables to BS 7870-3 and 4 and for paper cables to BS 7894. To be read in conjunction with BS 7888-1:1998

LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV) - Methods of test

BS 7888-1:1998 额定电压0.6/1KV(UDOWNm=1.2 kV)到并包括20.8/36kv(UDOWNm=42 kV)的电力电缆用低压和中压附件.总则

This British Standard gives generic definitions applicable to the BS 7888 series.

LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV) - General