29.120.20;29.240.20 标准查询与下载

BS 3288-2:2009 架空电力线路用绝缘子和导体配件.绝缘子配件规范

This part of BS 3288 specifies requirements for a range of insulator fittings for overhead power lines and also includes typical suspension clamps for conductors. The dimensions are given in Figures 1 to 91 and Tables 1 to 39.

Insulator and conductor fittings for overhead power lines - Specification for a range of insulator fittings

PIESA 1018-2-2004 使用架空导线束的低压架空电力线路．第2部分：绝缘中性线支撑导线用拉紧和悬吊配件

PIESA 1018-2 covers the requirements for the manufacture, testing and supply of strain and suspension fittings for insulated neutral supporting conductors for use on a.c. system voltages up to and including 1 000 V, and is based on European standards whi

Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 2: Strain and suspension fittings for insulated neutral supporting conductors

PIESA 1018-3-2004 使用架空导线束的低压架空电力线路用配件和连接器．第3部分：裸露中性线制成导线用拉紧和悬吊配件

PIESA 1018-3 covers the requirements for the manufacture, testing and supply of strain and suspension fittings for bare neutral supporting conductors for use on a.c. system voltage up to and including 1 000 V, and is based on European standards that have

Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 3: Strain and suspension fittings for bare neutral support conductors

PIESA 1018-5-2004 使用架空导线束的低压架空电力线路的配件和连接器．第5部分：带电连接器和接头

Covers the requirements for the manufacture, testing and supply of current-carrying connectors and joints for aerial bundled conductors for use on a.c. system voltages up to and including 1 000 V.

Fittings and connectors for low voltage overhead power lines using aerial bundled conductors Part 5: Current-carrying connectors and joints

PIESA 1018-4-2004 使用架空导线束的低压架空电力线路用配件和连接器．第4部分：架空用户电缆用拉紧和吊线配件

Covers the requirements for the manufacture, testing and supply of strain and suspension fittings for aerial service cables for use on a.c. system voltages up to and including 1000 V, and is based on European standards that have been modified where neces

Fittings and connectors for low voltage overhead power lines using aerial bundled conductors Part 4: Strain and suspension fittings for aerial service cables

PIESA 1020-2004 与低压架空导线束一起使用的配电电缆

Covers physical and performance requirements for cable ties intended for use with aerial bundled conductors (ABCs).

Electricity distribution - Cable ties for use with low-voltage aerial bundled conductors

NRS 020-2002 与架空导线束一起使用的配电电缆

Covers physical and performance requirements for cable ties intended for use with aerial bundled conductors (ABCs).

Electricity distribution - Cable ties for use with low voltage aerial bundled conductors

AS 3124:2002 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Specifies essential safety and associated requirements for the design, construction and testing of overhead line connector boxes, which must bemet before the connector boxes can be offered for sale. It is intended to be read in conjunction with AS/NZS 31

Approval and test specification for overhead line connector boxes

NRS 018-4-1996 使用架空导线束的低压架空电力线路用配件和连接器．第4部分：架空用户电缆用拉紧和悬吊配件

Covers the requirements for the manufacture, testing and supply of strain and suspension fittings for aerial service cables for use on a.c. system voltages up to and including 1 000 V, and is based on European standards that have been modified where nece

Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 4: Strain and suspension fittings for aerial service cables

NRS 018-5-1996 使用架空导线束的低压架空电力线路的配件和连接器．第5部分：带电连接器和接头

Covers the requirements for the manufacture, testing and supply of current-carrying connectors and joints for aerial bundled conductors for use on a.c. system voltages up to and including 1 000 V. Requirements for end caps intended for the waterproofing

Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 5: Current-carrying connectors and joints

NRS 018-3-1995 使用架空导线束的低压架空电力线路用配件和连接器．第3部分：裸露中性线制成导线用拉紧和悬吊配件

Covers the requirements for the manufacture, testing and supply of strain and suspension fittings for bare neutral supporting conductors for use on a.c. system voltages up to and including 1 000 V.

Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 3: Strain and suspension fittings for bare neutral supporting conductors

NRS 018-2-1995 使用架空导线束的低压架空电力线路用配件和连接器．第2部分：不接地中性线支撑导线用拉紧和悬吊配件

Covers the requirements for the manufacture, testing and supply of strain and suspension fittings for insulated neutral supporting conductors for use on a.c. system voltages up to and including 1 000 V.

Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 2: Strain and suspension fittings for insulated neutral supporting conductors

BS 3288-2:1990 架空电力绝缘子与架空电力导线接头规范.第2部分:接头规范

This Part of BS 3288 specifies requirements for a range of insulator and conductor fittings for overhead power lines. The dimensions are given in figures 1 to 89 and tables 1 to 35. NOTE 1. Typical arrangements of sag adjuster assemblies are shown in figures 77 to 82. NOTE 2. The titles of the publications referred to in this standard are listed on the inside back cover.

Insulator and conductor fittings for overhead power lines - Specification for a range of fittings