29.160.30;45.060.01 标准查询与下载

NF F65-349-4*NF EN 60349-4:2013 电力牵引.铁路与道路车辆用旋转电机.第4部分:与电子变流器相连接的永磁同步电机

Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: permanent magnet synchronous electrical machines connected to an electronic converter

DIN EN 60349-4:2013 电力牵引.铁路与道路车辆用旋转电机.第4部分:与电子变流器相连接的永磁同步电机(IEC 60349-4-2012).德文版本EN 60349-4-2013

Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter (IEC 60349-4:2012); German version EN 60349-4:2013

BS EN 60349-4:2013 电气牵引. 铁路和道路车辆用旋转电机. 连接有电子变换器的永磁同步电机

Electric traction. Rotating electrical machines for rail and road vehicles. Permanent magnet synchronous electrical machines connected to an electronic converter

DIN IEC/TS 60349-3:2011 电力牵引.铁路和公路车辆用旋转电机.第3部分:用组件损失汇总法测定转换器反馈交流电动机的总损失(IEC/TS 60349-3-2010)

Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses (IEC/TS 60349-3:2010)

NF F65-377-1:2006 轨道交通.铁路机车车辆.逆变器供电交流电动机及其控制的联合检验

Railway applications - Rolling stock - Part 1 : combined testing of inverter-fed alternating current motors and their control.

BS EN 61377-1:2006 轨道交通.机车车辆.反向供电交流电动机及其控制系统的联合测试

This part of IEC 61377 applies to the combinations of motor(s), inverter and their control system, and its object is to specify:

Railway applications - Rolling stock - Combined testing of inverter-fed alternating current motors and their control system

IEC 60349-1:2002 电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子变流器供电的交流电动机之外的旋转电机

Enables the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for a comparison with other machines. Applies to traction motors, engine driven main generators, main motor-ge

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors

IEC 60349-1/AMD1:2002 电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子交流器供电的交流电动机之外的旋转电机.修改1

This is Amendment 1 to IEC 60349-1-1999 (Electric traction Rotating electrical machines for rail and road vehicles Part 1: Machines other than electronic convertor-fed alternating current motors)

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors; Amendment 1

IEC 60349-2:2002 电力牵引.铁路与道路车辆用旋转电机.第2部分:电子变流器供电的交流电动机

Applies to convertor-fed alternating current motors forming part of the equipment of electrically propelled rail and road vehicles and enables the performance of a motor to be confirmed by tests.

Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic convertor-fed alternating current motors

DIN EN 60349-2:2002 轨道交通.铁路和公路车辆用旋转电机.第2部分:电子变流器馈电交流电动机

Railway applications - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors (IEC 60349-2:1993, modified); German version EN 60349-2:2001

BS EN 60349-2:2001 轨道交通.铁路和公路车辆用旋转电机.电子变流器馈电交流电动机

1 This European Standard applies to convertor-fed alternating current motors forming part of the equipment of electrically propelled rail and road vehicles. The object of this part 2 of EN 60349 is to enable the performance of a motor to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other motors. Where further testing is to be undertaken to EN 61377 "Combined testing of inverter-fed alternating current motors and their control", it may be preferable, to avoid duplication, that some type and investigation tests be carried out on the combined test bed. Particular attention is drawn to the need for collaboration between the designers of the motor and its associated convertor as detailed in clause 3.1. NOTE 1 This part also applies to motors installed on trailers hauled by powered vehicles. NOTE 2 The basic requirements of this part may be applied to motors for special purpose vehicles such as mine locomotives but this part does not cover flameproof or other special features that may be required. NOTE 3 It is not intended that this part should apply to motors on small road vehicles, such as battery-fed delivery vehicles, factory trucks, etc. This part also does not apply to minor machines such as windscreen wiper motors, etc. that may be used on all types of vehicles. NOTE 4 Industrial type motors complying with EN 60034 may be suitable for some auxiliary drives, providing that it is demonstrated that operation on a convertor supply will meet the requirements of the particular application. 2 The rating of traction motors fed in parallel by a common convertor has to take account of the effect on load-sharing of differences of wheel diameter and of motor characteristics and also of weight transfer when operating at high coefficients of adhesion. The user is to be informed of the maximum permissible difference in wheel diameter for the particular application. 3 The electrical input to motors covered by this part has to be from an electronic convertor. NOTE At the time of drafting this part only the following combinations of motors and converters had been used for traction applications, but it may also apply to other combinations which may be used in the future: - asynchronous motors fed by voltage source convertors; - asynchronous motors fed by current source convertors; - synchronous motors fed by current source convertors. The motors covered by this part are classified as follows: - Traction motors Motors for propelling rail or road vehicles. - Auxiliary motors not covered by EN 60034 Motors for driving compressors, fans, auxiliary generators or other auxiliary machines.

Railway applications - Rotating electrical machines for rail and road vehicles - Electronic convertor-fed alternating current motors